| .. _networking_with_native_posix: |
| |
| Networking with native_posix board |
| ################################## |
| |
| .. contents:: |
| :local: |
| :depth: 2 |
| |
| This page describes how to set up a virtual network between a (Linux) host |
| and a Zephyr application running in a native_posix board. |
| |
| In this example, the :ref:`sockets-echo-server-sample` sample application from |
| the Zephyr source distribution is run in native_posix board. The Zephyr |
| native_posix board instance is connected to a Linux host using a tuntap device |
| which is modeled in Linux as an Ethernet network interface. |
| |
| Prerequisites |
| ************* |
| |
| On the Linux Host, fetch the Zephyr ``net-tools`` project, which is located |
| in a separate Git repository: |
| |
| .. code-block:: console |
| |
| git clone https://github.com/zephyrproject-rtos/net-tools |
| |
| |
| Basic Setup |
| *********** |
| |
| For the steps below, you will need three terminal windows: |
| |
| * Terminal #1 is terminal window with net-tools being the current |
| directory (``cd net-tools``) |
| * Terminal #2 is your usual Zephyr development terminal, |
| with the Zephyr environment initialized. |
| * Terminal #3 is the console to the running Zephyr native_posix |
| instance (optional). |
| |
| Step 1 - Create Ethernet interface |
| ================================== |
| |
| Before starting native_posix with network emulation, a network interface |
| should be created. |
| |
| In terminal #1, type: |
| |
| .. code-block:: console |
| |
| ./net-setup.sh |
| |
| You can tweak the behavior of the net-setup.sh script. See various options |
| by running ``net-setup.sh`` like this: |
| |
| .. code-block:: console |
| |
| ./net-setup.sh --help |
| |
| |
| Step 2 - Start app in native_posix board |
| ======================================== |
| |
| Build and start the ``echo_server`` sample application. |
| |
| In terminal #2, type: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/net/sockets/echo_server |
| :host-os: unix |
| :board: native_posix |
| :goals: run |
| :compact: |
| |
| |
| Step 3 - Connect to console (optional) |
| ====================================== |
| |
| The console window should be launched automatically when the Zephyr instance is |
| started but if it does not show up, you can manually connect to the console. |
| The native_posix board will print a string like this when it starts: |
| |
| .. code-block:: console |
| |
| UART connected to pseudotty: /dev/pts/5 |
| |
| You can manually connect to it like this: |
| |
| .. code-block:: console |
| |
| screen /dev/pts/5 |