| /* |
| * Copyright (c) 2010, 2013-2014 Wind River Systems, Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /** |
| * @file |
| * @brief Low-level debug output |
| * |
| * Low-level debugging output. Platform installs a character output routine at |
| * init time. If no routine is installed, a nop routine is called. |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/sys/printk.h> |
| #include <stdarg.h> |
| #include <zephyr/toolchain.h> |
| #include <zephyr/linker/sections.h> |
| #include <zephyr/syscall_handler.h> |
| #include <zephyr/logging/log.h> |
| #include <zephyr/sys/cbprintf.h> |
| #include <sys/types.h> |
| |
| /* Option present only when CONFIG_USERSPACE enabled. */ |
| #ifndef CONFIG_PRINTK_BUFFER_SIZE |
| #define CONFIG_PRINTK_BUFFER_SIZE 0 |
| #endif |
| |
| #if defined(CONFIG_PRINTK_SYNC) |
| static struct k_spinlock lock; |
| #endif |
| |
| #ifdef CONFIG_PRINTK |
| /** |
| * @brief Default character output routine that does nothing |
| * @param c Character to swallow |
| * |
| * Note this is defined as a weak symbol, allowing architecture code |
| * to override it where possible to enable very early logging. |
| * |
| * @return 0 |
| */ |
| /* LCOV_EXCL_START */ |
| __attribute__((weak)) int arch_printk_char_out(int c) |
| { |
| ARG_UNUSED(c); |
| |
| /* do nothing */ |
| return 0; |
| } |
| /* LCOV_EXCL_STOP */ |
| |
| int (*_char_out)(int c) = arch_printk_char_out; |
| |
| /** |
| * @brief Install the character output routine for printk |
| * |
| * To be called by the platform's console driver at init time. Installs a |
| * routine that outputs one ASCII character at a time. |
| * @param fn putc routine to install |
| */ |
| void __printk_hook_install(int (*fn)(int c)) |
| { |
| _char_out = fn; |
| } |
| |
| /** |
| * @brief Get the current character output routine for printk |
| * |
| * To be called by any console driver that would like to save |
| * current hook - if any - for later re-installation. |
| * |
| * @return a function pointer or NULL if no hook is set |
| */ |
| void *__printk_get_hook(void) |
| { |
| return _char_out; |
| } |
| |
| struct buf_out_context { |
| #ifdef CONFIG_PICOLIBC |
| FILE file; |
| #endif |
| unsigned int buf_count; |
| char buf[CONFIG_PRINTK_BUFFER_SIZE]; |
| }; |
| |
| static void buf_flush(struct buf_out_context *ctx) |
| { |
| k_str_out(ctx->buf, ctx->buf_count); |
| ctx->buf_count = 0U; |
| } |
| |
| static int buf_char_out(int c, void *ctx_p) |
| { |
| struct buf_out_context *ctx = ctx_p; |
| |
| ctx->buf[ctx->buf_count++] = c; |
| if (ctx->buf_count == CONFIG_PRINTK_BUFFER_SIZE) { |
| buf_flush(ctx); |
| } |
| |
| return c; |
| } |
| |
| static int char_out(int c, void *ctx_p) |
| { |
| (void) ctx_p; |
| return _char_out(c); |
| } |
| |
| void vprintk(const char *fmt, va_list ap) |
| { |
| if (IS_ENABLED(CONFIG_LOG_PRINTK)) { |
| z_log_vprintk(fmt, ap); |
| return; |
| } |
| |
| if (k_is_user_context()) { |
| struct buf_out_context ctx = { |
| #ifdef CONFIG_PICOLIBC |
| .file = FDEV_SETUP_STREAM((int(*)(char, FILE *))buf_char_out, |
| NULL, NULL, _FDEV_SETUP_WRITE), |
| #else |
| 0 |
| #endif |
| }; |
| |
| #ifdef CONFIG_PICOLIBC |
| (void) vfprintf(&ctx.file, fmt, ap); |
| #else |
| cbvprintf(buf_char_out, &ctx, fmt, ap); |
| #endif |
| if (ctx.buf_count) { |
| buf_flush(&ctx); |
| } |
| } else { |
| #ifdef CONFIG_PRINTK_SYNC |
| k_spinlock_key_t key = k_spin_lock(&lock); |
| #endif |
| |
| #ifdef CONFIG_PICOLIBC |
| FILE console = FDEV_SETUP_STREAM((int(*)(char, FILE *))char_out, |
| NULL, NULL, _FDEV_SETUP_WRITE); |
| (void) vfprintf(&console, fmt, ap); |
| #else |
| cbvprintf(char_out, NULL, fmt, ap); |
| #endif |
| |
| #ifdef CONFIG_PRINTK_SYNC |
| k_spin_unlock(&lock, key); |
| #endif |
| } |
| } |
| |
| void z_impl_k_str_out(char *c, size_t n) |
| { |
| size_t i; |
| #ifdef CONFIG_PRINTK_SYNC |
| k_spinlock_key_t key = k_spin_lock(&lock); |
| #endif |
| |
| for (i = 0; i < n; i++) { |
| _char_out(c[i]); |
| } |
| |
| #ifdef CONFIG_PRINTK_SYNC |
| k_spin_unlock(&lock, key); |
| #endif |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| static inline void z_vrfy_k_str_out(char *c, size_t n) |
| { |
| Z_OOPS(Z_SYSCALL_MEMORY_READ(c, n)); |
| z_impl_k_str_out((char *)c, n); |
| } |
| #include <syscalls/k_str_out_mrsh.c> |
| #endif /* CONFIG_USERSPACE */ |
| |
| /** |
| * @brief Output a string |
| * |
| * Output a string on output installed by platform at init time. Some |
| * printf-like formatting is available. |
| * |
| * Available formatting: |
| * - %x/%X: outputs a number in hexadecimal format |
| * - %s: outputs a null-terminated string |
| * - %p: pointer, same as %x with a 0x prefix |
| * - %u: outputs a number in unsigned decimal format |
| * - %d/%i: outputs a number in signed decimal format |
| * |
| * Field width (with or without leading zeroes) is supported. |
| * Length attributes h, hh, l, ll and z are supported. However, integral |
| * values with %lld and %lli are only printed if they fit in a long |
| * otherwise 'ERR' is printed. Full 64-bit values may be printed with %llx. |
| * |
| * @param fmt formatted string to output |
| */ |
| |
| void printk(const char *fmt, ...) |
| { |
| va_list ap; |
| |
| va_start(ap, fmt); |
| |
| vprintk(fmt, ap); |
| |
| va_end(ap); |
| } |
| #endif /* defined(CONFIG_PRINTK) */ |
| |
| #ifndef CONFIG_PICOLIBC |
| |
| struct str_context { |
| char *str; |
| int max; |
| int count; |
| }; |
| |
| static int str_out(int c, struct str_context *ctx) |
| { |
| if (ctx->str == NULL || ctx->count >= ctx->max) { |
| ctx->count++; |
| return c; |
| } |
| |
| if (ctx->count == ctx->max - 1) { |
| ctx->str[ctx->count++] = '\0'; |
| } else { |
| ctx->str[ctx->count++] = c; |
| } |
| |
| return c; |
| } |
| |
| int snprintk(char *str, size_t size, const char *fmt, ...) |
| { |
| va_list ap; |
| int ret; |
| |
| va_start(ap, fmt); |
| ret = vsnprintk(str, size, fmt, ap); |
| va_end(ap); |
| |
| return ret; |
| } |
| |
| int vsnprintk(char *str, size_t size, const char *fmt, va_list ap) |
| { |
| struct str_context ctx = { str, size, 0 }; |
| |
| cbvprintf(str_out, &ctx, fmt, ap); |
| |
| if (ctx.count < ctx.max) { |
| str[ctx.count] = '\0'; |
| } |
| |
| return ctx.count; |
| } |
| |
| #endif |