/** | |
****************************************************************************** | |
* @file stm32f1xx_hal_pwr.h | |
* @author MCD Application Team | |
* @version V1.1.0 | |
* @date 14-April-2017 | |
* @brief Header file of PWR HAL module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F1xx_HAL_PWR_H | |
#define __STM32F1xx_HAL_PWR_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f1xx_hal_def.h" | |
/** @addtogroup STM32F1xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup PWR | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup PWR_Exported_Types PWR Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief PWR PVD configuration structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. | |
This parameter can be a value of @ref PWR_PVD_detection_level */ | |
uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. | |
This parameter can be a value of @ref PWR_PVD_Mode */ | |
}PWR_PVDTypeDef; | |
/** | |
* @} | |
*/ | |
/* Internal constants --------------------------------------------------------*/ | |
/** @addtogroup PWR_Private_Constants | |
* @{ | |
*/ | |
#define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup PWR_Exported_Constants PWR Exported Constants | |
* @{ | |
*/ | |
/** @defgroup PWR_PVD_detection_level PWR PVD detection level | |
* @{ | |
*/ | |
#define PWR_PVDLEVEL_0 PWR_CR_PLS_2V2 | |
#define PWR_PVDLEVEL_1 PWR_CR_PLS_2V3 | |
#define PWR_PVDLEVEL_2 PWR_CR_PLS_2V4 | |
#define PWR_PVDLEVEL_3 PWR_CR_PLS_2V5 | |
#define PWR_PVDLEVEL_4 PWR_CR_PLS_2V6 | |
#define PWR_PVDLEVEL_5 PWR_CR_PLS_2V7 | |
#define PWR_PVDLEVEL_6 PWR_CR_PLS_2V8 | |
#define PWR_PVDLEVEL_7 PWR_CR_PLS_2V9 | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_PVD_Mode PWR PVD Mode | |
* @{ | |
*/ | |
#define PWR_PVD_MODE_NORMAL 0x00000000U /*!< basic mode is used */ | |
#define PWR_PVD_MODE_IT_RISING 0x00010001U /*!< External Interrupt Mode with Rising edge trigger detection */ | |
#define PWR_PVD_MODE_IT_FALLING 0x00010002U /*!< External Interrupt Mode with Falling edge trigger detection */ | |
#define PWR_PVD_MODE_IT_RISING_FALLING 0x00010003U /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ | |
#define PWR_PVD_MODE_EVENT_RISING 0x00020001U /*!< Event Mode with Rising edge trigger detection */ | |
#define PWR_PVD_MODE_EVENT_FALLING 0x00020002U /*!< Event Mode with Falling edge trigger detection */ | |
#define PWR_PVD_MODE_EVENT_RISING_FALLING 0x00020003U /*!< Event Mode with Rising/Falling edge trigger detection */ | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins | |
* @{ | |
*/ | |
#define PWR_WAKEUP_PIN1 PWR_CSR_EWUP | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode PWR Regulator state in SLEEP/STOP mode | |
* @{ | |
*/ | |
#define PWR_MAINREGULATOR_ON 0x00000000U | |
#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry | |
* @{ | |
*/ | |
#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) | |
#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry | |
* @{ | |
*/ | |
#define PWR_STOPENTRY_WFI ((uint8_t)0x01) | |
#define PWR_STOPENTRY_WFE ((uint8_t)0x02) | |
/** | |
* @} | |
*/ | |
/** @defgroup PWR_Flag PWR Flag | |
* @{ | |
*/ | |
#define PWR_FLAG_WU PWR_CSR_WUF | |
#define PWR_FLAG_SB PWR_CSR_SBF | |
#define PWR_FLAG_PVDO PWR_CSR_PVDO | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup PWR_Exported_Macros PWR Exported Macros | |
* @{ | |
*/ | |
/** @brief Check PWR flag is set or not. | |
* @param __FLAG__: specifies the flag to check. | |
* This parameter can be one of the following values: | |
* @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event | |
* was received from the WKUP pin or from the RTC alarm | |
* An additional wakeup event is detected if the WKUP pin is enabled | |
* (by setting the EWUP bit) when the WKUP pin level is already high. | |
* @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was | |
* resumed from StandBy mode. | |
* @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled | |
* by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode | |
* For this reason, this bit is equal to 0 after Standby or reset | |
* until the PVDE bit is set. | |
* @retval The new state of __FLAG__ (TRUE or FALSE). | |
*/ | |
#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) | |
/** @brief Clear the PWR's pending flags. | |
* @param __FLAG__: specifies the flag to clear. | |
* This parameter can be one of the following values: | |
* @arg PWR_FLAG_WU: Wake Up flag | |
* @arg PWR_FLAG_SB: StandBy flag | |
*/ | |
#define __HAL_PWR_CLEAR_FLAG(__FLAG__) SET_BIT(PWR->CR, ((__FLAG__) << 2)) | |
/** | |
* @brief Enable interrupt on PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Disable interrupt on PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Enable event on PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Disable event on PVD Exti Line 16. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief PVD EXTI line configuration: set falling edge trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Disable the PVD Extended Interrupt Falling Trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief PVD EXTI line configuration: set rising edge trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief Disable the PVD Extended Interrupt Rising Trigger. | |
* This parameter can be: | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) | |
/** | |
* @brief PVD EXTI line configuration: set rising & falling edge trigger. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); | |
/** | |
* @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. | |
* This parameter can be: | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); | |
/** | |
* @brief Check whether the specified PVD EXTI interrupt flag is set or not. | |
* @retval EXTI PVD Line Status. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Clear the PVD EXTI flag. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) | |
/** | |
* @brief Generate a Software interrupt on selected EXTI line. | |
* @retval None. | |
*/ | |
#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, PWR_EXTI_LINE_PVD) | |
/** | |
* @} | |
*/ | |
/* Private macro -------------------------------------------------------------*/ | |
/** @defgroup PWR_Private_Macros PWR Private Macros | |
* @{ | |
*/ | |
#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ | |
((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ | |
((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ | |
((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) | |
#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ | |
((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ | |
((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ | |
((MODE) == PWR_PVD_MODE_NORMAL)) | |
#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1)) | |
#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ | |
((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) | |
#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) | |
#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @addtogroup PWR_Exported_Functions PWR Exported Functions | |
* @{ | |
*/ | |
/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions | |
* @{ | |
*/ | |
/* Initialization and de-initialization functions *******************************/ | |
void HAL_PWR_DeInit(void); | |
void HAL_PWR_EnableBkUpAccess(void); | |
void HAL_PWR_DisableBkUpAccess(void); | |
/** | |
* @} | |
*/ | |
/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions | |
* @{ | |
*/ | |
/* Peripheral Control functions ************************************************/ | |
void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); | |
/* #define HAL_PWR_ConfigPVD 12*/ | |
void HAL_PWR_EnablePVD(void); | |
void HAL_PWR_DisablePVD(void); | |
/* WakeUp pins configuration functions ****************************************/ | |
void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); | |
void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); | |
/* Low Power modes configuration functions ************************************/ | |
void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); | |
void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); | |
void HAL_PWR_EnterSTANDBYMode(void); | |
void HAL_PWR_EnableSleepOnExit(void); | |
void HAL_PWR_DisableSleepOnExit(void); | |
void HAL_PWR_EnableSEVOnPend(void); | |
void HAL_PWR_DisableSEVOnPend(void); | |
void HAL_PWR_PVD_IRQHandler(void); | |
void HAL_PWR_PVDCallback(void); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F1xx_HAL_PWR_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |