blob: a415f0a028366628a41f0d3c968ce8c951b083e5 [file] [log] [blame]
/**
* @file
*
* @brief Generic low-level inter-processor mailbox communication API.
*/
/*
* Copyright (c) 2015 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_INCLUDE_DRIVERS_IPM_H_
#define ZEPHYR_INCLUDE_DRIVERS_IPM_H_
/**
* @brief IPM Interface
* @defgroup ipm_interface IPM Interface
* @ingroup io_interfaces
* @{
*/
#include <kernel.h>
#include <device.h>
#ifdef __cplusplus
extern "C" {
#endif
/**
* @typedef ipm_callback_t
* @brief Callback API for incoming IPM messages
*
* These callbacks execute in interrupt context. Therefore, use only
* interrupt-safe APIS. Registration of callbacks is done via
* @a ipm_register_callback
*
* @param ipmdev Driver instance
* @param user_data Pointer to some private data provided at registration
* time.
* @param id Message type identifier.
* @param data Message data pointer. The correct amount of data to read out
* must be inferred using the message id/upper level protocol.
*/
typedef void (*ipm_callback_t)(const struct device *ipmdev, void *user_data,
uint32_t id, volatile void *data);
/**
* @typedef ipm_send_t
* @brief Callback API to send IPM messages
*
* See @a ipm_send() for argument definitions.
*/
typedef int (*ipm_send_t)(const struct device *ipmdev, int wait, uint32_t id,
const void *data, int size);
/**
* @typedef ipm_max_data_size_get_t
* @brief Callback API to get maximum data size
*
* See @a ipm_max_data_size_get() for argument definitions.
*/
typedef int (*ipm_max_data_size_get_t)(const struct device *ipmdev);
/**
* @typedef ipm_max_id_val_get_t
* @brief Callback API to get the ID's maximum value
*
* See @a ipm_max_id_val_get() for argument definitions.
*/
typedef uint32_t (*ipm_max_id_val_get_t)(const struct device *ipmdev);
/**
* @typedef ipm_register_callback_t
* @brief Callback API upon registration
*
* See @a ipm_register_callback() for argument definitions.
*/
typedef void (*ipm_register_callback_t)(const struct device *port,
ipm_callback_t cb,
void *user_data);
/**
* @typedef ipm_set_enabled_t
* @brief Callback API upon enablement of interrupts
*
* See @a ipm_set_enabled() for argument definitions.
*/
typedef int (*ipm_set_enabled_t)(const struct device *ipmdev, int enable);
__subsystem struct ipm_driver_api {
ipm_send_t send;
ipm_register_callback_t register_callback;
ipm_max_data_size_get_t max_data_size_get;
ipm_max_id_val_get_t max_id_val_get;
ipm_set_enabled_t set_enabled;
};
/**
* @brief Try to send a message over the IPM device.
*
* A message is considered consumed once the remote interrupt handler
* finishes. If there is deferred processing on the remote side,
* or if outgoing messages must be queued and wait on an
* event/semaphore, a high-level driver can implement that.
*
* There are constraints on how much data can be sent or the maximum value
* of id. Use the @a ipm_max_data_size_get and @a ipm_max_id_val_get routines
* to determine them.
*
* The @a size parameter is used only on the sending side to determine
* the amount of data to put in the message registers. It is not passed along
* to the receiving side. The upper-level protocol dictates the amount of
* data read back.
*
* @param ipmdev Driver instance
* @param wait If nonzero, busy-wait for remote to consume the message. The
* message is considered consumed once the remote interrupt handler
* finishes. If there is deferred processing on the remote side,
* or you would like to queue outgoing messages and wait on an
* event/semaphore, you can implement that in a high-level driver
* @param id Message identifier. Values are constrained by
* @a ipm_max_data_size_get since many boards only allow for a
* subset of bits in a 32-bit register to store the ID.
* @param data Pointer to the data sent in the message.
* @param size Size of the data.
*
* @retval -EBUSY If the remote hasn't yet read the last data sent.
* @retval -EMSGSIZE If the supplied data size is unsupported by the driver.
* @retval -EINVAL If there was a bad parameter, such as: too-large id value.
* or the device isn't an outbound IPM channel.
* @retval 0 On success.
*/
__syscall int ipm_send(const struct device *ipmdev, int wait, uint32_t id,
const void *data, int size);
static inline int z_impl_ipm_send(const struct device *ipmdev, int wait,
uint32_t id,
const void *data, int size)
{
const struct ipm_driver_api *api =
(const struct ipm_driver_api *)ipmdev->api;
return api->send(ipmdev, wait, id, data, size);
}
/**
* @brief Register a callback function for incoming messages.
*
* @param ipmdev Driver instance pointer.
* @param cb Callback function to execute on incoming message interrupts.
* @param user_data Application-specific data pointer which will be passed
* to the callback function when executed.
*/
static inline void ipm_register_callback(const struct device *ipmdev,
ipm_callback_t cb, void *user_data)
{
const struct ipm_driver_api *api =
(const struct ipm_driver_api *)ipmdev->api;
api->register_callback(ipmdev, cb, user_data);
}
/**
* @brief Return the maximum number of bytes possible in an outbound message.
*
* IPM implementations vary on the amount of data that can be sent in a
* single message since the data payload is typically stored in registers.
*
* @param ipmdev Driver instance pointer.
*
* @return Maximum possible size of a message in bytes.
*/
__syscall int ipm_max_data_size_get(const struct device *ipmdev);
static inline int z_impl_ipm_max_data_size_get(const struct device *ipmdev)
{
const struct ipm_driver_api *api =
(const struct ipm_driver_api *)ipmdev->api;
return api->max_data_size_get(ipmdev);
}
/**
* @brief Return the maximum id value possible in an outbound message.
*
* Many IPM implementations store the message's ID in a register with
* some bits reserved for other uses.
*
* @param ipmdev Driver instance pointer.
*
* @return Maximum possible value of a message ID.
*/
__syscall uint32_t ipm_max_id_val_get(const struct device *ipmdev);
static inline uint32_t z_impl_ipm_max_id_val_get(const struct device *ipmdev)
{
const struct ipm_driver_api *api =
(const struct ipm_driver_api *)ipmdev->api;
return api->max_id_val_get(ipmdev);
}
/**
* @brief Enable interrupts and callbacks for inbound channels.
*
* @param ipmdev Driver instance pointer.
* @param enable Set to 0 to disable and to nonzero to enable.
*
* @retval 0 On success.
* @retval -EINVAL If it isn't an inbound channel.
*/
__syscall int ipm_set_enabled(const struct device *ipmdev, int enable);
static inline int z_impl_ipm_set_enabled(const struct device *ipmdev,
int enable)
{
const struct ipm_driver_api *api =
(const struct ipm_driver_api *)ipmdev->api;
return api->set_enabled(ipmdev, enable);
}
#ifdef __cplusplus
}
#endif
/**
* @}
*/
#include <syscalls/ipm.h>
#endif /* ZEPHYR_INCLUDE_DRIVERS_IPM_H_ */