blob: 85f1b84219dc6c7ab1e60550e35184567a7cd819 [file] [log] [blame]
/** @file
* @brief Network context definitions
*
* An API for applications to define a network connection.
*/
/*
* Copyright (c) 2016 Intel Corporation
* Copyright (c) 2021 Nordic Semiconductor
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_INCLUDE_NET_NET_CONTEXT_H_
#define ZEPHYR_INCLUDE_NET_NET_CONTEXT_H_
/**
* @brief Application network context
* @defgroup net_context Application network context
* @ingroup networking
* @{
*/
#include <kernel.h>
#include <sys/atomic.h>
#include <net/net_ip.h>
#include <net/net_if.h>
#include <net/net_stats.h>
#ifdef __cplusplus
extern "C" {
#endif
/** Is this context used or not */
#define NET_CONTEXT_IN_USE BIT(0)
/** State of the context (bits 1 & 2 in the flags) */
enum net_context_state {
NET_CONTEXT_IDLE = 0,
NET_CONTEXT_UNCONNECTED = 0,
NET_CONTEXT_CONFIGURING = 1,
NET_CONTEXT_CONNECTING = 1,
NET_CONTEXT_READY = 2,
NET_CONTEXT_CONNECTED = 2,
NET_CONTEXT_LISTENING = 3,
};
/**
* The address family, connection type and IP protocol are
* stored into a bit field to save space.
*/
/** Protocol family of this connection */
#define NET_CONTEXT_FAMILY (BIT(3) | BIT(4) | BIT(5))
/** Type of the connection (datagram / stream / raw) */
#define NET_CONTEXT_TYPE (BIT(6) | BIT(7))
/** Remote address set */
#define NET_CONTEXT_REMOTE_ADDR_SET BIT(8)
/** Is the socket accepting connections */
#define NET_CONTEXT_ACCEPTING_SOCK BIT(9)
/** Is the socket closing / closed */
#define NET_CONTEXT_CLOSING_SOCK BIT(10)
/* Context is bound to a specific interface */
#define NET_CONTEXT_BOUND_TO_IFACE BIT(11)
struct net_context;
/**
* @typedef net_context_recv_cb_t
* @brief Network data receive callback.
*
* @details The recv callback is called after a network data packet is
* received. This callback is called by RX thread so its stack and execution
* context is used here. Keep processing in the callback minimal to reduce the
* time spent blocked while handling packets.
*
* @param context The context to use.
* @param pkt Network buffer that is received. If the pkt is not NULL,
* then the callback will own the buffer and it needs to to unref the pkt
* as soon as it has finished working with it. On EOF, pkt will be NULL.
* @param ip_hdr a pointer to relevant IP (v4 or v6) header.
* @param proto_hdr a pointer to relevant protocol (udp or tcp) header.
* @param status Value is set to 0 if some data or the connection is
* at EOF, <0 if there was an error receiving data, in this case the
* pkt parameter is set to NULL.
* @param user_data The user data given in net_recv() call.
*/
typedef void (*net_context_recv_cb_t)(struct net_context *context,
struct net_pkt *pkt,
union net_ip_header *ip_hdr,
union net_proto_header *proto_hdr,
int status,
void *user_data);
/**
* @typedef net_context_send_cb_t
* @brief Network data send callback.
*
* @details The send callback is called after a network data packet is sent.
* This callback is called by TX thread so its stack and execution context is
* used here. Keep processing in the callback minimal to reduce the time spent
* blocked while handling packets.
*
* @param context The context to use.
* @param status Value is set to >= 0: amount of data that was sent,
* < 0 there was an error sending data.
* @param user_data The user data given in net_send() call.
*/
typedef void (*net_context_send_cb_t)(struct net_context *context,
int status,
void *user_data);
/**
* @typedef net_tcp_accept_cb_t
* @brief Accept callback
*
* @details The accept callback is called after a successful connection was
* established or if there was an error while we were waiting for a connection
* attempt. This callback is called by RX thread so its stack and execution
* context is used here. Keep processing in the callback minimal to reduce the
* time spent blocked while handling packets.
*
* @param new_context The context to use.
* @param addr The peer address.
* @param addrlen Length of the peer address.
* @param status The status code, 0 on success, < 0 otherwise
* @param user_data The user data given in net_context_accept() call.
*/
typedef void (*net_tcp_accept_cb_t)(struct net_context *new_context,
struct sockaddr *addr,
socklen_t addrlen,
int status,
void *user_data);
/**
* @typedef net_context_connect_cb_t
* @brief Connection callback.
*
* @details The connect callback is called after a connection is being
* established.
* For TCP connections, this callback is called by RX thread so its stack and
* execution context is used here. The callback is called after the TCP
* connection was established or if the connection failed. Keep processing in
* the callback minimal to reduce the time spent blocked while handling
* packets.
* For UDP connections, this callback is called immediately by
* net_context_connect() function. UDP is a connectionless protocol so the
* connection can be thought of being established immediately.
*
* @param context The context to use.
* @param status Status of the connection establishment. This is 0
* if the connection was established successfully, <0 if there was an
* error.
* @param user_data The user data given in net_context_connect() call.
*/
typedef void (*net_context_connect_cb_t)(struct net_context *context,
int status,
void *user_data);
/* The net_pkt_get_slab_func_t is here in order to avoid circular
* dependency between net_pkt.h and net_context.h
*/
/**
* @typedef net_pkt_get_slab_func_t
*
* @brief Function that is called to get the slab that is used
* for net_pkt allocations.
*
* @return Pointer to valid struct k_mem_slab instance.
*/
typedef struct k_mem_slab *(*net_pkt_get_slab_func_t)(void);
/* The net_pkt_get_pool_func_t is here in order to avoid circular
* dependency between net_pkt.h and net_context.h
*/
/**
* @typedef net_pkt_get_pool_func_t
*
* @brief Function that is called to get the pool that is used
* for net_buf allocations.
*
* @return Pointer to valid struct net_buf_pool instance.
*/
typedef struct net_buf_pool *(*net_pkt_get_pool_func_t)(void);
struct net_tcp;
struct net_conn_handle;
/**
* Note that we do not store the actual source IP address in the context
* because the address is already be set in the network interface struct.
* If there is no such source address there, the packet cannot be sent
* anyway. This saves 12 bytes / context in IPv6.
*/
__net_socket struct net_context {
/** User data.
*
* First member of the structure to let users either have user data
* associated with a context, or put contexts into a FIFO.
*/
void *user_data;
/** Reference count
*/
atomic_t refcount;
/** Internal lock for protecting this context from multiple access.
*/
struct k_mutex lock;
/** Local endpoint address. Note that the values are in network byte
* order.
*/
struct sockaddr_ptr local;
/** Remote endpoint address. Note that the values are in network byte
* order.
*/
struct sockaddr remote;
/** Connection handle */
struct net_conn_handle *conn_handler;
/** Receive callback to be called when desired packet
* has been received.
*/
net_context_recv_cb_t recv_cb;
/** Send callback to be called when the packet has been sent
* successfully.
*/
net_context_send_cb_t send_cb;
/** Connect callback to be called when a connection has been
* established.
*/
net_context_connect_cb_t connect_cb;
#if defined(CONFIG_NET_CONTEXT_NET_PKT_POOL)
/** Get TX net_buf pool for this context.
*/
net_pkt_get_slab_func_t tx_slab;
/** Get DATA net_buf pool for this context.
*/
net_pkt_get_pool_func_t data_pool;
#endif /* CONFIG_NET_CONTEXT_NET_PKT_POOL */
#if defined(CONFIG_NET_TCP2)
/** TCP connection information */
void *tcp;
#endif /* CONFIG_NET_TCP2 */
#if defined(CONFIG_NET_CONTEXT_SYNC_RECV)
/**
* Semaphore to signal synchronous recv call completion.
*/
struct k_sem recv_data_wait;
#endif /* CONFIG_NET_CONTEXT_SYNC_RECV */
#if defined(CONFIG_NET_SOCKETS)
/** BSD socket private data */
void *socket_data;
/** Per-socket packet or connection queues */
union {
struct k_fifo recv_q;
struct k_fifo accept_q;
};
struct {
/** Condition variable used when receiving data */
struct k_condvar recv;
/** Mutex used by condition variable */
struct k_mutex *lock;
} cond;
#endif /* CONFIG_NET_SOCKETS */
#if defined(CONFIG_NET_OFFLOAD)
/** context for use by offload drivers */
void *offload_context;
#endif /* CONFIG_NET_OFFLOAD */
#if defined(CONFIG_NET_SOCKETS_CAN)
int can_filter_id;
#endif /* CONFIG_NET_SOCKETS_CAN */
/** Option values */
struct {
#if defined(CONFIG_NET_CONTEXT_PRIORITY)
/** Priority of the network data sent via this net_context */
uint8_t priority;
#endif
#if defined(CONFIG_NET_CONTEXT_TXTIME)
bool txtime;
#endif
#if defined(CONFIG_SOCKS)
struct {
struct sockaddr addr;
socklen_t addrlen;
} proxy;
#endif
#if defined(CONFIG_NET_CONTEXT_RCVTIMEO)
k_timeout_t rcvtimeo;
#endif
#if defined(CONFIG_NET_CONTEXT_SNDTIMEO)
k_timeout_t sndtimeo;
#endif
} options;
/** Protocol (UDP, TCP or IEEE 802.3 protocol value) */
uint16_t proto;
/** Flags for the context */
uint16_t flags;
/** Network interface assigned to this context */
int8_t iface;
/** IPv6 hop limit or IPv4 ttl for packets sent via this context. */
union {
uint8_t ipv6_hop_limit;
uint8_t ipv4_ttl;
};
#if defined(CONFIG_SOCKS)
bool proxy_enabled;
#endif
};
static inline bool net_context_is_used(struct net_context *context)
{
NET_ASSERT(context);
return context->flags & NET_CONTEXT_IN_USE;
}
static inline bool net_context_is_bound_to_iface(struct net_context *context)
{
NET_ASSERT(context);
return context->flags & NET_CONTEXT_BOUND_TO_IFACE;
}
/**
* @brief Is this context is accepting data now.
*
* @param context Network context.
*
* @return True if the context is accepting connections, False otherwise.
*/
static inline bool net_context_is_accepting(struct net_context *context)
{
NET_ASSERT(context);
return context->flags & NET_CONTEXT_ACCEPTING_SOCK;
}
/**
* @brief Set this context to accept data now.
*
* @param context Network context.
* @param accepting True if accepting, False if not
*/
static inline void net_context_set_accepting(struct net_context *context,
bool accepting)
{
NET_ASSERT(context);
if (accepting) {
context->flags |= NET_CONTEXT_ACCEPTING_SOCK;
} else {
context->flags &= ~NET_CONTEXT_ACCEPTING_SOCK;
}
}
/**
* @brief Is this context closing.
*
* @param context Network context.
*
* @return True if the context is closing, False otherwise.
*/
static inline bool net_context_is_closing(struct net_context *context)
{
NET_ASSERT(context);
return context->flags & NET_CONTEXT_CLOSING_SOCK;
}
/**
* @brief Set this context to closing.
*
* @param context Network context.
* @param closing True if closing, False if not
*/
static inline void net_context_set_closing(struct net_context *context,
bool closing)
{
NET_ASSERT(context);
if (closing) {
context->flags |= NET_CONTEXT_CLOSING_SOCK;
} else {
context->flags &= ~NET_CONTEXT_CLOSING_SOCK;
}
}
#define NET_CONTEXT_STATE_SHIFT 1
#define NET_CONTEXT_STATE_MASK 0x03
/**
* @brief Get state for this network context.
*
* @details This function returns the state of the context.
*
* @param context Network context.
*
* @return Network state.
*/
static inline
enum net_context_state net_context_get_state(struct net_context *context)
{
NET_ASSERT(context);
return (enum net_context_state)
((context->flags >> NET_CONTEXT_STATE_SHIFT) &
NET_CONTEXT_STATE_MASK);
}
/**
* @brief Set state for this network context.
*
* @details This function sets the state of the context.
*
* @param context Network context.
* @param state New network context state.
*/
static inline void net_context_set_state(struct net_context *context,
enum net_context_state state)
{
NET_ASSERT(context);
context->flags &= ~(NET_CONTEXT_STATE_MASK << NET_CONTEXT_STATE_SHIFT);
context->flags |= ((state & NET_CONTEXT_STATE_MASK) <<
NET_CONTEXT_STATE_SHIFT);
}
/**
* @brief Get address family for this network context.
*
* @details This function returns the address family (IPv4 or IPv6)
* of the context.
*
* @param context Network context.
*
* @return Network state.
*/
static inline sa_family_t net_context_get_family(struct net_context *context)
{
NET_ASSERT(context);
return ((context->flags & NET_CONTEXT_FAMILY) >> 3);
}
/**
* @brief Set address family for this network context.
*
* @details This function sets the address family (IPv4, IPv6 or AF_PACKET)
* of the context.
*
* @param context Network context.
* @param family Address family (AF_INET, AF_INET6, AF_PACKET, AF_CAN)
*/
static inline void net_context_set_family(struct net_context *context,
sa_family_t family)
{
uint8_t flag = 0U;
NET_ASSERT(context);
if (family == AF_UNSPEC || family == AF_INET || family == AF_INET6 ||
family == AF_PACKET || family == AF_CAN) {
/* Family is in BIT(4), BIT(5) and BIT(6) */
flag = family << 3;
}
context->flags |= flag;
}
/**
* @brief Get context type for this network context.
*
* @details This function returns the context type (stream, datagram or raw)
* of the context.
*
* @param context Network context.
*
* @return Network context type.
*/
static inline
enum net_sock_type net_context_get_type(struct net_context *context)
{
NET_ASSERT(context);
return (enum net_sock_type)((context->flags & NET_CONTEXT_TYPE) >> 6);
}
/**
* @brief Set context type for this network context.
*
* @details This function sets the context type (stream or datagram)
* of the context.
*
* @param context Network context.
* @param type Context type (SOCK_STREAM or SOCK_DGRAM)
*/
static inline void net_context_set_type(struct net_context *context,
enum net_sock_type type)
{
uint16_t flag = 0U;
NET_ASSERT(context);
if (type == SOCK_DGRAM || type == SOCK_STREAM || type == SOCK_RAW) {
/* Type is in BIT(6) and BIT(7)*/
flag = type << 6;
}
context->flags |= flag;
}
/**
* @brief Set CAN filter id for this network context.
*
* @details This function sets the CAN filter id of the context.
*
* @param context Network context.
* @param filter_id CAN filter id
*/
#if defined(CONFIG_NET_SOCKETS_CAN)
static inline void net_context_set_filter_id(struct net_context *context,
int filter_id)
{
NET_ASSERT(context);
context->can_filter_id = filter_id;
}
#else
static inline void net_context_set_filter_id(struct net_context *context,
int filter_id)
{
ARG_UNUSED(context);
ARG_UNUSED(filter_id);
}
#endif
/**
* @brief Get CAN filter id for this network context.
*
* @details This function gets the CAN filter id of the context.
*
* @param context Network context.
*
* @return Filter id of this network context
*/
#if defined(CONFIG_NET_SOCKETS_CAN)
static inline int net_context_get_filter_id(struct net_context *context)
{
NET_ASSERT(context);
return context->can_filter_id;
}
#else
static inline int net_context_get_filter_id(struct net_context *context)
{
ARG_UNUSED(context);
return -1;
}
#endif
/**
* @brief Get context IP protocol for this network context.
*
* @details This function returns the IP protocol (UDP / TCP /
* IEEE 802.3 protocol value) of the context.
*
* @param context Network context.
*
* @return Network context IP protocol.
*/
static inline uint16_t net_context_get_ip_proto(struct net_context *context)
{
return context->proto;
}
/**
* @brief Set context IP protocol for this network context.
*
* @details This function sets the context IP protocol (UDP / TCP)
* of the context.
*
* @param context Network context.
* @param proto Context IP protocol (IPPROTO_UDP, IPPROTO_TCP or IEEE 802.3
* protocol value)
*/
static inline void net_context_set_ip_proto(struct net_context *context,
uint16_t proto)
{
context->proto = proto;
}
/**
* @brief Get network interface for this context.
*
* @details This function returns the used network interface.
*
* @param context Network context.
*
* @return Context network interface if context is bind to interface,
* NULL otherwise.
*/
static inline
struct net_if *net_context_get_iface(struct net_context *context)
{
NET_ASSERT(context);
return net_if_get_by_index(context->iface);
}
/**
* @brief Set network interface for this context.
*
* @details This function binds network interface to this context.
*
* @param context Network context.
* @param iface Network interface.
*/
static inline void net_context_set_iface(struct net_context *context,
struct net_if *iface)
{
NET_ASSERT(iface);
context->iface = net_if_get_by_iface(iface);
}
static inline uint8_t net_context_get_ipv4_ttl(struct net_context *context)
{
return context->ipv4_ttl;
}
static inline void net_context_set_ipv4_ttl(struct net_context *context,
uint8_t ttl)
{
context->ipv4_ttl = ttl;
}
static inline uint8_t net_context_get_ipv6_hop_limit(struct net_context *context)
{
return context->ipv6_hop_limit;
}
static inline void net_context_set_ipv6_hop_limit(struct net_context *context,
uint8_t hop_limit)
{
context->ipv6_hop_limit = hop_limit;
}
#if defined(CONFIG_SOCKS)
static inline void net_context_set_proxy_enabled(struct net_context *context,
bool enable)
{
context->proxy_enabled = enable;
}
static inline bool net_context_is_proxy_enabled(struct net_context *context)
{
return context->proxy_enabled;
}
#else
static inline void net_context_set_proxy_enabled(struct net_context *context,
bool enable)
{
ARG_UNUSED(context);
ARG_UNUSED(enable);
}
static inline bool net_context_is_proxy_enabled(struct net_context *context)
{
return false;
}
#endif
/**
* @brief Get network context.
*
* @details Network context is used to define the connection 5-tuple
* (protocol, remote address, remote port, source address and source
* port). Random free port number will be assigned to source port when
* context is created. This is similar as BSD socket() function.
* The context will be created with a reference count of 1.
*
* @param family IP address family (AF_INET or AF_INET6)
* @param type Type of the socket, SOCK_STREAM or SOCK_DGRAM
* @param ip_proto IP protocol, IPPROTO_UDP or IPPROTO_TCP. For raw socket
* access, the value is the L2 protocol value from IEEE 802.3 (see ethernet.h)
* @param context The allocated context is returned to the caller.
*
* @return 0 if ok, < 0 if error
*/
int net_context_get(sa_family_t family,
enum net_sock_type type,
uint16_t ip_proto,
struct net_context **context);
/**
* @brief Close and unref a network context.
*
* @details This releases the context. It is not possible to send or
* receive data via this context after this call. This is similar as
* BSD shutdown() function. For legacy compatibility, this function
* will implicitly decrement the reference count and possibly destroy
* the context either now or when it reaches a final state.
*
* @param context The context to be closed.
*
* @return 0 if ok, < 0 if error
*/
int net_context_put(struct net_context *context);
/**
* @brief Take a reference count to a net_context, preventing destruction
*
* @details Network contexts are not recycled until their reference
* count reaches zero. Note that this does not prevent any "close"
* behavior that results from errors or net_context_put. It simply
* prevents the context from being recycled for further use.
*
* @param context The context on which to increment the reference count
*
* @return The new reference count
*/
int net_context_ref(struct net_context *context);
/**
* @brief Decrement the reference count to a network context
*
* @details Decrements the refcount. If it reaches zero, the context
* will be recycled. Note that this does not cause any
* network-visible "close" behavior (i.e. future packets to this
* connection may see TCP RST or ICMP port unreachable responses). See
* net_context_put() for that.
*
* @param context The context on which to decrement the reference count
*
* @return The new reference count, zero if the context was destroyed
*/
int net_context_unref(struct net_context *context);
/**
* @brief Create IPv4 packet in provided net_pkt from context
*
* @param context Network context for a connection
* @param pkt Network packet
* @param src Source address, or NULL to choose a default
* @param dst Destination IPv4 address
*
* @return Return 0 on success, negative errno otherwise.
*/
#if defined(CONFIG_NET_IPV4)
int net_context_create_ipv4_new(struct net_context *context,
struct net_pkt *pkt,
const struct in_addr *src,
const struct in_addr *dst);
#else
static inline int net_context_create_ipv4_new(struct net_context *context,
struct net_pkt *pkt,
const struct in_addr *src,
const struct in_addr *dst)
{
return -1;
}
#endif /* CONFIG_NET_IPV4 */
/**
* @brief Create IPv6 packet in provided net_pkt from context
*
* @param context Network context for a connection
* @param pkt Network packet
* @param src Source address, or NULL to choose a default from context
* @param dst Destination IPv6 address
*
* @return Return 0 on success, negative errno otherwise.
*/
#if defined(CONFIG_NET_IPV6)
int net_context_create_ipv6_new(struct net_context *context,
struct net_pkt *pkt,
const struct in6_addr *src,
const struct in6_addr *dst);
#else
static inline int net_context_create_ipv6_new(struct net_context *context,
struct net_pkt *pkt,
const struct in6_addr *src,
const struct in6_addr *dst)
{
return -1;
}
#endif /* CONFIG_NET_IPV6 */
/**
* @brief Assign a socket a local address.
*
* @details This is similar as BSD bind() function.
*
* @param context The context to be assigned.
* @param addr Address to assigned.
* @param addrlen Length of the address.
*
* @return 0 if ok, < 0 if error
*/
int net_context_bind(struct net_context *context,
const struct sockaddr *addr,
socklen_t addrlen);
/**
* @brief Mark the context as a listening one.
*
* @details This is similar as BSD listen() function.
*
* @param context The context to use.
* @param backlog The size of the pending connections backlog.
*
* @return 0 if ok, < 0 if error
*/
int net_context_listen(struct net_context *context,
int backlog);
/**
* @brief Create a network connection.
*
* @details The net_context_connect function creates a network
* connection to the host specified by addr. After the
* connection is established, the user-supplied callback (cb)
* is executed. cb is called even if the timeout was set to
* K_FOREVER. cb is not called if the timeout expires.
* For datagram sockets (SOCK_DGRAM), this function only sets
* the peer address.
* This function is similar to the BSD connect() function.
*
* @param context The network context.
* @param addr The peer address to connect to.
* @param addrlen Peer address length.
* @param cb Callback function. Set to NULL if not required.
* @param timeout The timeout value for the connection. Possible values:
* * K_NO_WAIT: this function will return immediately,
* * K_FOREVER: this function will block until the
* connection is established,
* * >0: this function will wait the specified ms.
* @param user_data Data passed to the callback function.
*
* @return 0 on success.
* @return -EINVAL if an invalid parameter is passed as an argument.
* @return -ENOTSUP if the operation is not supported or implemented.
* @return -ETIMEDOUT if the connect operation times out.
*/
int net_context_connect(struct net_context *context,
const struct sockaddr *addr,
socklen_t addrlen,
net_context_connect_cb_t cb,
k_timeout_t timeout,
void *user_data);
/**
* @brief Accept a network connection attempt.
*
* @details Accept a connection being established. This function
* will return immediately if the timeout is set to K_NO_WAIT.
* In this case the context will call the supplied callback when ever
* there is a connection established to this context. This is "a register
* handler and forget" type of call (async).
* If the timeout is set to K_FOREVER, the function will wait
* until the connection is established. Timeout value > 0, will wait as
* many ms.
* After the connection is established a caller-supplied callback is called.
* The callback is called even if timeout was set to K_FOREVER, the
* callback is called before this function will return in this case.
* The callback is not called if the timeout expires.
* This is similar as BSD accept() function.
*
* @param context The context to use.
* @param cb Caller-supplied callback function.
* @param timeout Timeout for the connection. Possible values
* are K_FOREVER, K_NO_WAIT, >0.
* @param user_data Caller-supplied user data.
*
* @return 0 if ok, < 0 if error
*/
int net_context_accept(struct net_context *context,
net_tcp_accept_cb_t cb,
k_timeout_t timeout,
void *user_data);
/**
* @brief Send data to a peer.
*
* @details This function can be used to send network data to a peer
* connection. After the network buffer is sent, a caller-supplied
* callback is called. Note that the callback might be called after this
* function has returned. For context of type SOCK_DGRAM, the destination
* address must have been set by the call to net_context_connect().
* This is similar as BSD send() function.
*
* @param context The network context to use.
* @param buf The data buffer to send
* @param len Length of the buffer
* @param cb Caller-supplied callback function.
* @param timeout Currently this value is not used.
* @param user_data Caller-supplied user data.
*
* @return 0 if ok, < 0 if error
*/
int net_context_send(struct net_context *context,
const void *buf,
size_t len,
net_context_send_cb_t cb,
k_timeout_t timeout,
void *user_data);
/**
* @brief Send data to a peer specified by address.
*
* @details This function can be used to send network data to a peer
* specified by address. This variant can only be used for datagram
* connections of type SOCK_DGRAM. After the network buffer is sent,
* a caller-supplied callback is called. Note that the callback might be
* called after this function has returned.
* This is similar as BSD sendto() function.
*
* @param context The network context to use.
* @param buf The data buffer to send
* @param len Length of the buffer
* @param dst_addr Destination address.
* @param addrlen Length of the address.
* @param cb Caller-supplied callback function.
* @param timeout Currently this value is not used.
* @param user_data Caller-supplied user data.
*
* @return numbers of bytes sent on success, a negative errno otherwise
*/
int net_context_sendto(struct net_context *context,
const void *buf,
size_t len,
const struct sockaddr *dst_addr,
socklen_t addrlen,
net_context_send_cb_t cb,
k_timeout_t timeout,
void *user_data);
/**
* @brief Send data in iovec to a peer specified in msghdr struct.
*
* @details This function has similar semantics as Posix sendmsg() call.
* For unconnected socket, the msg_name field in msghdr must be set. For
* connected socket the msg_name should be set to NULL, and msg_namelen to 0.
* After the network buffer is sent, a caller-supplied callback is called.
* Note that the callback might be called after this function has returned.
*
* @param context The network context to use.
* @param msghdr The data to send
* @param flags Flags for the sending.
* @param cb Caller-supplied callback function.
* @param timeout Currently this value is not used.
* @param user_data Caller-supplied user data.
*
* @return numbers of bytes sent on success, a negative errno otherwise
*/
int net_context_sendmsg(struct net_context *context,
const struct msghdr *msghdr,
int flags,
net_context_send_cb_t cb,
k_timeout_t timeout,
void *user_data);
/**
* @brief Receive network data from a peer specified by context.
*
* @details This function can be used to register a callback function
* that is called by the network stack when network data has been received
* for this context. As this function registers a callback, then there
* is no need to call this function multiple times if timeout is set to
* K_NO_WAIT.
* If callback function or user data changes, then the function can be called
* multiple times to register new values.
* This function will return immediately if the timeout is set to K_NO_WAIT.
* If the timeout is set to K_FOREVER, the function will wait until the
* network buffer is received. Timeout value > 0 will wait as many ms.
* After the network buffer is received, a caller-supplied callback is
* called. The callback is called even if timeout was set to K_FOREVER,
* the callback is called before this function will return in this case.
* The callback is not called if the timeout expires. The timeout functionality
* can be compiled out if synchronous behavior is not needed. The sync call
* logic requires some memory that can be saved if only async way of call is
* used. If CONFIG_NET_CONTEXT_SYNC_RECV is not set, then the timeout parameter
* value is ignored.
* This is similar as BSD recv() function.
* Note that net_context_bind() should be called before net_context_recv().
* Default random port number is assigned to local port. Only bind() will
* update connection information from context. If recv() is called before
* bind() call, it may refuse to bind to a context which already has
* a connection associated.
*
* @param context The network context to use.
* @param cb Caller-supplied callback function.
* @param timeout Caller-supplied timeout. Possible values
* are K_FOREVER, K_NO_WAIT, >0.
* @param user_data Caller-supplied user data.
*
* @return 0 if ok, < 0 if error
*/
int net_context_recv(struct net_context *context,
net_context_recv_cb_t cb,
k_timeout_t timeout,
void *user_data);
/**
* @brief Update TCP receive window for context.
*
* @details This function should be used by an application which
* doesn't fully process incoming data in its receive callback,
* but for example, queues it. In this case, receive callback
* should decrease the window (call this function with a negative
* value) by the size of queued data, and function(s) which dequeue
* data - with positive value corresponding to the dequeued size.
* For example, if receive callback gets a packet with the data
* size of 256 and queues it, it should call this function with
* delta of -256. If a function extracts 10 bytes of the queued
* data, it should call it with delta of 10.
*
* @param context The TCP network context to use.
* @param delta Size, in bytes, by which to increase TCP receive
* window (negative value to decrease).
*
* @return 0 if ok, < 0 if error
*/
int net_context_update_recv_wnd(struct net_context *context,
int32_t delta);
enum net_context_option {
NET_OPT_PRIORITY = 1,
NET_OPT_TXTIME = 2,
NET_OPT_SOCKS5 = 3,
NET_OPT_RCVTIMEO = 4,
NET_OPT_SNDTIMEO = 5,
};
/**
* @brief Set an connection option for this context.
*
* @param context The network context to use.
* @param option Option to set
* @param value Option value
* @param len Option length
*
* @return 0 if ok, <0 if error
*/
int net_context_set_option(struct net_context *context,
enum net_context_option option,
const void *value, size_t len);
/**
* @brief Get connection option value for this context.
*
* @param context The network context to use.
* @param option Option to set
* @param value Option value
* @param len Option length (returned to caller)
*
* @return 0 if ok, <0 if error
*/
int net_context_get_option(struct net_context *context,
enum net_context_option option,
void *value, size_t *len);
/**
* @typedef net_context_cb_t
* @brief Callback used while iterating over network contexts
*
* @param context A valid pointer on current network context
* @param user_data A valid pointer on some user data or NULL
*/
typedef void (*net_context_cb_t)(struct net_context *context, void *user_data);
/**
* @brief Go through all the network connections and call callback
* for each network context.
*
* @param cb User-supplied callback function to call.
* @param user_data User specified data.
*/
void net_context_foreach(net_context_cb_t cb, void *user_data);
/**
* @brief Set custom network buffer pools for context send operations
*
* Set custom network buffer pools used by the IP stack to allocate
* network buffers used by the context when sending data to the
* network. Using dedicated buffers may help make send operations on
* a given context more reliable, e.g. not be subject to buffer
* starvation due to operations on other network contexts. Buffer pools
* are set per context, but several contexts may share the same buffers.
* Note that there's no support for per-context custom receive packet
* pools.
*
* @param context Context that will use the given net_buf pools.
* @param tx_pool Pointer to the function that will return TX pool
* to the caller. The TX pool is used when sending data to network.
* There is one TX net_pkt for each network packet that is sent.
* @param data_pool Pointer to the function that will return DATA pool
* to the caller. The DATA pool is used to store data that is sent to
* the network.
*/
#if defined(CONFIG_NET_CONTEXT_NET_PKT_POOL)
static inline void net_context_setup_pools(struct net_context *context,
net_pkt_get_slab_func_t tx_slab,
net_pkt_get_pool_func_t data_pool)
{
NET_ASSERT(context);
context->tx_slab = tx_slab;
context->data_pool = data_pool;
}
#else
#define net_context_setup_pools(context, tx_pool, data_pool)
#endif
/**
* @brief Check if a port is in use (bound)
*
* This function checks if a port is bound with respect to the specified
* @p ip_proto and @p local_addr.
*
* @param ip_proto the IP protocol
* @param local_port the port to check
* @param local_addr the network address
*
* @return true if the port is bound
* @return false if the port is not bound
*/
bool net_context_port_in_use(enum net_ip_protocol ip_proto,
uint16_t local_port, const struct sockaddr *local_addr);
#ifdef __cplusplus
}
#endif
/**
* @}
*/
#endif /* ZEPHYR_INCLUDE_NET_NET_CONTEXT_H_ */