| # Zephyr Bluetooth Controller configuration options |
| |
| # Copyright (c) 2020 Nordic Semiconductor ASA |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config BT_CTLR_DF_SUPPORT |
| bool |
| select BT_CTLR_DF_CTE_TX_SUPPORT |
| select BT_CTLR_DF_ANT_SWITCH_2US_SUPPORT |
| select BT_CTLR_DF_ANT_SWITCH_1US_SUPPORT |
| select BT_CTLR_DF_CTE_RX_SUPPORT |
| select BT_CTLR_DF_CTE_RX_SAMPLE_1US_SUPPORT |
| |
| config BT_CTLR_DF_CTE_TX_SUPPORT |
| bool |
| |
| config BT_CTLR_DF_CTE_RX_SUPPORT |
| bool |
| |
| config BT_CTLR_DF_CTE_RX_SAMPLE_1US_SUPPORT |
| bool |
| |
| config BT_CTLR_DF_ANT_SWITCH_2US_SUPPORT |
| bool |
| |
| config BT_CTLR_DF_ANT_SWITCH_1US_SUPPORT |
| bool |
| |
| menuconfig BT_CTLR_DF |
| bool "LE Direction Finding [Experimental]" |
| depends on BT_CTLR_DF_SUPPORT |
| help |
| Enable support for Bluetooth 5.1 Direction Finding |
| |
| if BT_CTLR_DF |
| |
| # Basic controller functionalities required for implementation of |
| # Bluetooth v5.1 Direction Finding |
| |
| config BT_CTLR_DF_CTE_TX |
| bool "Enable transmission of Constant Tone Extension" |
| depends on BT_CTLR_DF_CTE_TX_SUPPORT |
| default y |
| help |
| Enable support for transmission of Constant Tone Extension in |
| controller. |
| |
| config BT_CTLR_DF_CTE_RX_SAMPLE_1US |
| bool "Enable reception of CTE with 1us sampling slots" |
| depends on BT_CTLR_DF_CTE_RX_SAMPLE_1US_SUPPORT |
| default y |
| help |
| Enable reception of Constant Tone Extension. Process IQ sampling |
| during CTE reception with 1us sampling slots. |
| This sampling mode is optional for Direction Finding according to |
| Bluetooth v5.1. |
| |
| config BT_CTLR_DF_ANT_SWITCH_1US |
| bool "Enable support for 1us antenna switch slots" |
| depends on BT_CTLR_DF_ANT_SWITCH_1US_SUPPORT |
| default y |
| help |
| Enable support for 1us antenna switching slots. This antenna switching |
| mode is optional for Direction Finding according to Bluetooth v5.1. |
| |
| # Features related with Direction Finding |
| # BT Core spec 5.1, Vol 6, Part B, sec. 4.6 Feature Support |
| |
| config BT_CTLR_DF_ANT_SWITCH_TX |
| bool "Enable antenna switching during CTE transmission (AoD) feature" |
| depends on BT_CTLR_DF_CTE_TX && BT_CTLR_DF_ANT_SWITCH_2US_SUPPORT |
| default y |
| help |
| Enable support for antenna switching during CTE transmission. |
| Also known as Angle of Departure mode. |
| |
| config BT_CTLR_DF_ANT_SWITCH_RX |
| bool "Enable antenna switching during CTE reception (AoA) feature" |
| depends on BT_CTLR_DF_CTE_RX && BT_CTLR_DF_ANT_SWITCH_2US_SUPPORT |
| default y |
| help |
| Enable support for antenna switching during CTE reception. |
| Also known as Angle of Arrival mode. |
| |
| config BT_CTLR_DF_CTE_RX |
| bool "Enable reception of Constant Tone Extension feature" |
| depends on BT_CTLR_DF_CTE_RX_SUPPORT |
| default y |
| help |
| Enable support for reception of Constant Tone Extension in controller. |
| |
| config BT_CTLR_DF_CONN_CTE_RSP |
| bool "Enable Connection CTE Response feature" |
| depends on BT_CTLR_DF_CTE_TX && BT_CONN |
| help |
| Enable support for Bluetooth v5.1 Connection CTE Response feature |
| in controller. |
| |
| config BT_CTLR_DF_ADV_CTE_TX |
| bool "Enable Connectionless CTE Transmitter feature" |
| depends on BT_CTLR_DF_CTE_TX && BT_CTLR_ADV_PERIODIC |
| select BT_CTLR_ADV_EXT_PDU_EXTRA_DATA_MEMORY |
| default y |
| help |
| Enable support for Bluetooth v5.1 Connectionless CTE Transmitter |
| feature in controller. |
| |
| config BT_CTLR_DF_SCAN_CTE_RX |
| bool "Enable Connectionless CTE Receiver" |
| depends on BT_CTLR_DF_CTE_RX && BT_CTLR_SYNC_PERIODIC |
| default y |
| help |
| Enable support for Bluetooth v5.1 connectionless CTE reception |
| in controller. |
| |
| config BT_CTLR_DF_SAMPLE_CTE_FOR_PDU_WITH_BAD_CRC |
| bool "Enable sampling of CTE for PDUs with bad CRC" |
| depends on BT_CTLR_DF_SCAN_CTE_RX |
| default y |
| help |
| Enable support for sampling of CTE for PDUs that have bad CRC. |
| |
| # Customization setting to manage memory usage footprint |
| |
| config BT_CTLR_DF_MAX_ANT_SW_PATTERN_LEN |
| int "Maximum length of antenna switch pattern" |
| range 3 39 if SOC_COMPATIBLE_NRF |
| range 2 75 if !SOC_COMPATIBLE_NRF |
| default 12 |
| help |
| Defines maximum length of antenna switch pattern that controller |
| is able to store. For nRF5x-based controllers, the hardware imposes |
| the value is within range 3 to 40, where last value is maximum. |
| For general use cases Bluetooth Core 5.1 spec. required the value |
| to be within range 2 up to 75. |
| |
| config BT_CTLR_DF_INIT_ANT_SEL_GPIOS |
| bool "Enable initialization of GPIOs responsible for antenna switching" |
| depends on BT_CTLR_DF_ANT_SWITCH_TX || BT_CTLR_DF_ANT_SWITCH_RX |
| default y |
| help |
| Enable implicit initialization of GPIOs responsible for antenna |
| switching during Radio initialization. |
| If this feature is not enabled, the Radio initialization procedure will |
| not initialize GPIOs pins selected to drive antenna switching. |
| In such case application is responsible for appropriate GPIOs |
| initialization. |
| |
| config BT_CTLR_DF_DEBUG_ENABLE |
| bool "Bluetooth Direction Finding debug support enable" |
| help |
| This option enables debug support for the Direction Finding |
| implementation in controller. |
| |
| endif # BT_CTLR_DF |
