drivers/gpio/gpio_gd32.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2021 Teslabs Engineering S.L.
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT gd_gd32_gpio

 #include <zephyr/drivers/gpio.h>
 #include <zephyr/drivers/clock_control.h>
 #include <zephyr/drivers/clock_control/gd32.h>
 #include <zephyr/drivers/interrupt_controller/gd32_exti.h>
 #include <zephyr/drivers/reset.h>

 #include <gd32_gpio.h>

 #include <zephyr/drivers/gpio/gpio_utils.h>

 #ifdef CONFIG_GD32_HAS_AF_PINMUX
 /** SYSCFG DT node */
 #define SYSCFG_NODE DT_NODELABEL(syscfg)
 #else
 /** AFIO DT node */
 #define AFIO_NODE DT_NODELABEL(afio)

 /** GPIO mode: analog (CTL bits) */
 #define CTL_MODE_ANALOG 0x0U
 /** GPIO mode: input floating (CTL bits) */
 #define CTL_MODE_INP_FLOAT 0x4U
 /** GPIO mode: input with pull-up/down (CTL bits) */
 #define CTL_MODE_INP_PUPD 0x8U
 /** GPIO mode: output push-pull @ 2MHz (CTL bits) */
 #define CTL_MODE_OUT_PP 0x2U
 /** GPIO mode: output open-drain @ 2MHz (CTL bits) */
 #define CTL_MODE_OUT_OD 0x6U
 #endif /* CONFIG_GD32_HAS_AF_PINMUX */

 /** EXTISS mask */
 #define EXTISS_MSK 0xFU
 /** EXTISS line step size */
 #define EXTISS_STEP 4U
 /** EXTISS line shift */
 #define EXTISS_LINE_SHIFT(pin) (EXTISS_STEP * ((pin) % EXTISS_STEP))

 struct gpio_gd32_config {
 	struct gpio_driver_config common;
 	uint32_t reg;
 	uint16_t clkid;
 	uint16_t clkid_exti;
 	struct reset_dt_spec reset;
 };

 struct gpio_gd32_data {
 	struct gpio_driver_data common;
 	sys_slist_t callbacks;
 };

 /**
  * @brief EXTI ISR callback.
  *
  * @param line EXTI line (equals to GPIO pin number).
  * @param arg GPIO port instance.
  */
 static void gpio_gd32_isr(uint8_t line, void *arg)
 {
 	const struct device *dev = arg;
 	struct gpio_gd32_data *data = dev->data;

 	gpio_fire_callbacks(&data->callbacks, dev, BIT(line));
 }

 /**
  * @brief Configure EXTI source selection register.
  *
  * @param port GPIO port instance.
  * @param pin GPIO pin number.
  *
  * @retval 0 on success.
  * @retval -EINVAL if pin is not valid.
  */
 static int gpio_gd32_configure_extiss(const struct device *port,
 				      gpio_pin_t pin)
 {
 	const struct gpio_gd32_config *config = port->config;
 	uint8_t port_index, shift;
 	volatile uint32_t *extiss;

 	switch (pin / EXTISS_STEP) {
 #ifdef CONFIG_GD32_HAS_AF_PINMUX
 	case 0U:
 		extiss = &SYSCFG_EXTISS0;
 		break;
 	case 1U:
 		extiss = &SYSCFG_EXTISS1;
 		break;
 	case 2U:
 		extiss = &SYSCFG_EXTISS2;
 		break;
 	case 3U:
 		extiss = &SYSCFG_EXTISS3;
 		break;
 #else
 	case 0U:
 		extiss = &AFIO_EXTISS0;
 		break;
 	case 1U:
 		extiss = &AFIO_EXTISS1;
 		break;
 	case 2U:
 		extiss = &AFIO_EXTISS2;
 		break;
 	case 3U:
 		extiss = &AFIO_EXTISS3;
 		break;
 #endif /* CONFIG_GD32_HAS_AF_PINMUX */
 	default:
 		return -EINVAL;
 	}

 	port_index = (config->reg - GPIOA) / (GPIOB - GPIOA);
 	shift = EXTISS_LINE_SHIFT(pin);

 	*extiss &= ~(EXTISS_MSK << shift);
 	*extiss |= port_index << shift;

 	return 0;
 }

 static inline int gpio_gd32_configure(const struct device *port, gpio_pin_t pin,
 				      gpio_flags_t flags)
 {
 	const struct gpio_gd32_config *config = port->config;

 #ifdef CONFIG_GD32_HAS_AF_PINMUX
 	uint32_t ctl, pupd;

 	ctl = GPIO_CTL(config->reg);
 	ctl &= ~GPIO_MODE_MASK(pin);

 	pupd = GPIO_PUD(config->reg);
 	pupd &= ~GPIO_PUPD_MASK(pin);

 	if ((flags & GPIO_OUTPUT) != 0U) {
 		ctl |= GPIO_MODE_SET(pin, GPIO_MODE_OUTPUT);

 		if ((flags & GPIO_SINGLE_ENDED) != 0U) {
 			if ((flags & GPIO_LINE_OPEN_DRAIN) != 0U) {
 				GPIO_OMODE(config->reg) |= BIT(pin);
 			} else {
 				return -ENOTSUP;
 			}
 		} else {
 			GPIO_OMODE(config->reg) &= ~BIT(pin);
 		}

 		if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
 			GPIO_BOP(config->reg) = BIT(pin);
 		} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
 			GPIO_BC(config->reg) = BIT(pin);
 		}
 	} else if ((flags & GPIO_INPUT) != 0U) {
 		ctl |= GPIO_MODE_SET(pin, GPIO_MODE_INPUT);
 	} else {
 		ctl |= GPIO_MODE_SET(pin, GPIO_MODE_ANALOG);
 	}

 	if ((flags & GPIO_PULL_UP) != 0U) {
 		pupd |= GPIO_PUPD_SET(pin, GPIO_PUPD_PULLUP);
 	} else if ((flags & GPIO_PULL_DOWN) != 0U) {
 		pupd |= GPIO_PUPD_SET(pin, GPIO_PUPD_PULLDOWN);
 	} else {
 		pupd |= GPIO_PUPD_SET(pin, GPIO_PUPD_NONE);
 	}

 	GPIO_PUD(config->reg) = pupd;
 	GPIO_CTL(config->reg) = ctl;
 #else
 	volatile uint32_t *ctl_reg;
 	uint32_t ctl, pin_bit;

 	pin_bit = BIT(pin);

 	if (pin < 8U) {
 		ctl_reg = &GPIO_CTL0(config->reg);
 	} else {
 		ctl_reg = &GPIO_CTL1(config->reg);
 		pin -= 8U;
 	}

 	ctl = *ctl_reg;
 	ctl &= ~GPIO_MODE_MASK(pin);

 	if ((flags & GPIO_OUTPUT) != 0U) {
 		if ((flags & GPIO_SINGLE_ENDED) != 0U) {
 			if ((flags & GPIO_LINE_OPEN_DRAIN) != 0U) {
 				ctl |= GPIO_MODE_SET(pin, CTL_MODE_OUT_OD);
 			} else {
 				return -ENOTSUP;
 			}
 		} else {
 			ctl |= GPIO_MODE_SET(pin, CTL_MODE_OUT_PP);
 		}

 		if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
 			GPIO_BOP(config->reg) = pin_bit;
 		} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
 			GPIO_BC(config->reg) = pin_bit;
 		}
 	} else if ((flags & GPIO_INPUT) != 0U) {
 		if ((flags & GPIO_PULL_UP) != 0U) {
 			ctl |= GPIO_MODE_SET(pin, CTL_MODE_INP_PUPD);
 			GPIO_BOP(config->reg) = pin_bit;
 		} else if ((flags & GPIO_PULL_DOWN) != 0U) {
 			ctl |= GPIO_MODE_SET(pin, CTL_MODE_INP_PUPD);
 			GPIO_BC(config->reg) = pin_bit;
 		} else {
 			ctl |= GPIO_MODE_SET(pin, CTL_MODE_INP_FLOAT);
 		}
 	} else {
 		ctl |= GPIO_MODE_SET(pin, CTL_MODE_ANALOG);
 	}

 	*ctl_reg = ctl;
 #endif /* CONFIG_GD32_HAS_AF_PINMUX */

 	return 0;
 }

 static int gpio_gd32_port_get_raw(const struct device *port, uint32_t *value)
 {
 	const struct gpio_gd32_config *config = port->config;

 	*value = GPIO_ISTAT(config->reg);

 	return 0;
 }

 static int gpio_gd32_port_set_masked_raw(const struct device *port,
 					 gpio_port_pins_t mask,
 					 gpio_port_value_t value)
 {
 	const struct gpio_gd32_config *config = port->config;

 	GPIO_OCTL(config->reg) =
 		(GPIO_OCTL(config->reg) & ~mask) | (value & mask);

 	return 0;
 }

 static int gpio_gd32_port_set_bits_raw(const struct device *port,
 				       gpio_port_pins_t pins)
 {
 	const struct gpio_gd32_config *config = port->config;

 	GPIO_BOP(config->reg) = pins;

 	return 0;
 }

 static int gpio_gd32_port_clear_bits_raw(const struct device *port,
 					 gpio_port_pins_t pins)
 {
 	const struct gpio_gd32_config *config = port->config;

 	GPIO_BC(config->reg) = pins;

 	return 0;
 }

 static int gpio_gd32_port_toggle_bits(const struct device *port,
 				      gpio_port_pins_t pins)
 {
 	const struct gpio_gd32_config *config = port->config;

 #ifdef CONFIG_GD32_HAS_AF_PINMUX
 	GPIO_TG(config->reg) = pins;
 #else
 	GPIO_OCTL(config->reg) ^= pins;
 #endif /* CONFIG_GD32_HAS_AF_PINMUX */

 	return 0;
 }

 static int gpio_gd32_pin_interrupt_configure(const struct device *port,
 					     gpio_pin_t pin,
 					     enum gpio_int_mode mode,
 					     enum gpio_int_trig trig)
 {
 	if (mode == GPIO_INT_MODE_DISABLED) {
 		gd32_exti_disable(pin);
 		(void)gd32_exti_configure(pin, NULL, NULL);
 		gd32_exti_trigger(pin, GD32_EXTI_TRIG_NONE);
 	} else if (mode == GPIO_INT_MODE_EDGE) {
 		int ret;

 		ret = gd32_exti_configure(pin, gpio_gd32_isr, (void *)port);
 		if (ret < 0) {
 			return ret;
 		}

 		ret = gpio_gd32_configure_extiss(port, pin);
 		if (ret < 0) {
 			return ret;
 		}

 		switch (trig) {
 		case GPIO_INT_TRIG_LOW:
 			gd32_exti_trigger(pin, GD32_EXTI_TRIG_FALLING);
 			break;
 		case GPIO_INT_TRIG_HIGH:
 			gd32_exti_trigger(pin, GD32_EXTI_TRIG_RISING);
 			break;
 		case GPIO_INT_TRIG_BOTH:
 			gd32_exti_trigger(pin, GD32_EXTI_TRIG_BOTH);
 			break;
 		default:
 			return -ENOTSUP;
 		}

 		gd32_exti_enable(pin);
 	} else {
 		return -ENOTSUP;
 	}

 	return 0;
 }

 static int gpio_gd32_manage_callback(const struct device *dev,
 				     struct gpio_callback *callback, bool set)
 {
 	struct gpio_gd32_data *data = dev->data;

 	return gpio_manage_callback(&data->callbacks, callback, set);
 }

 static const struct gpio_driver_api gpio_gd32_api = {
 	.pin_configure = gpio_gd32_configure,
 	.port_get_raw = gpio_gd32_port_get_raw,
 	.port_set_masked_raw = gpio_gd32_port_set_masked_raw,
 	.port_set_bits_raw = gpio_gd32_port_set_bits_raw,
 	.port_clear_bits_raw = gpio_gd32_port_clear_bits_raw,
 	.port_toggle_bits = gpio_gd32_port_toggle_bits,
 	.pin_interrupt_configure = gpio_gd32_pin_interrupt_configure,
 	.manage_callback = gpio_gd32_manage_callback,
 };

 static int gpio_gd32_init(const struct device *port)
 {
 	const struct gpio_gd32_config *config = port->config;

 	(void)clock_control_on(GD32_CLOCK_CONTROLLER,
 			       (clock_control_subsys_t)&config->clkid);
 	(void)clock_control_on(GD32_CLOCK_CONTROLLER,
 			       (clock_control_subsys_t)&config->clkid_exti);

 	(void)reset_line_toggle_dt(&config->reset);

 	return 0;
 }

 #define GPIO_GD32_DEFINE(n)						       \
 	static const struct gpio_gd32_config gpio_gd32_config##n = {	       \
 		.common = {						       \
 			.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n),   \
 		},							       \
 		.reg = DT_INST_REG_ADDR(n),				       \
 		.clkid = DT_INST_CLOCKS_CELL(n, id),			       \
 		COND_CODE_1(DT_NODE_HAS_STATUS(SYSCFG_NODE, okay),	       \
 			    (.clkid_exti = DT_CLOCKS_CELL(SYSCFG_NODE, id),),  \
 			    (.clkid_exti = DT_CLOCKS_CELL(AFIO_NODE, id),))    \
 		.reset = RESET_DT_SPEC_INST_GET(n),			       \
 	};								       \
 									       \
 	static struct gpio_gd32_data gpio_gd32_data##n;			       \
 									       \
 	DEVICE_DT_INST_DEFINE(n, &gpio_gd32_init, NULL, &gpio_gd32_data##n,    \
 			      &gpio_gd32_config##n, PRE_KERNEL_1,	       \
 			      CONFIG_GPIO_INIT_PRIORITY, &gpio_gd32_api);

 DT_INST_FOREACH_STATUS_OKAY(GPIO_GD32_DEFINE)
	/*
	* Copyright (c) 2021 Teslabs Engineering S.L.
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT gd_gd32_gpio

	#include <zephyr/drivers/gpio.h>
	#include <zephyr/drivers/clock_control.h>
	#include <zephyr/drivers/clock_control/gd32.h>
	#include <zephyr/drivers/interrupt_controller/gd32_exti.h>
	#include <zephyr/drivers/reset.h>

	#include <gd32_gpio.h>

	#include <zephyr/drivers/gpio/gpio_utils.h>

	#ifdef CONFIG_GD32_HAS_AF_PINMUX
	/** SYSCFG DT node */
	#define SYSCFG_NODE DT_NODELABEL(syscfg)
	#else
	/** AFIO DT node */
	#define AFIO_NODE DT_NODELABEL(afio)

	/** GPIO mode: analog (CTL bits) */
	#define CTL_MODE_ANALOG 0x0U
	/** GPIO mode: input floating (CTL bits) */
	#define CTL_MODE_INP_FLOAT 0x4U
	/** GPIO mode: input with pull-up/down (CTL bits) */
	#define CTL_MODE_INP_PUPD 0x8U
	/** GPIO mode: output push-pull @ 2MHz (CTL bits) */
	#define CTL_MODE_OUT_PP 0x2U
	/** GPIO mode: output open-drain @ 2MHz (CTL bits) */
	#define CTL_MODE_OUT_OD 0x6U
	#endif /* CONFIG_GD32_HAS_AF_PINMUX */

	/** EXTISS mask */
	#define EXTISS_MSK 0xFU
	/** EXTISS line step size */
	#define EXTISS_STEP 4U
	/** EXTISS line shift */
	#define EXTISS_LINE_SHIFT(pin) (EXTISS_STEP * ((pin) % EXTISS_STEP))

	struct gpio_gd32_config {
	struct gpio_driver_config common;
	uint32_t reg;
	uint16_t clkid;
	uint16_t clkid_exti;
	struct reset_dt_spec reset;
	};

	struct gpio_gd32_data {
	struct gpio_driver_data common;
	sys_slist_t callbacks;
	};

	/**
	* @brief EXTI ISR callback.
	*
	* @param line EXTI line (equals to GPIO pin number).
	* @param arg GPIO port instance.
	*/
	static void gpio_gd32_isr(uint8_t line, void *arg)
	{
	const struct device *dev = arg;
	struct gpio_gd32_data *data = dev->data;

	gpio_fire_callbacks(&data->callbacks, dev, BIT(line));
	}

	/**
	* @brief Configure EXTI source selection register.
	*
	* @param port GPIO port instance.
	* @param pin GPIO pin number.
	*
	* @retval 0 on success.
	* @retval -EINVAL if pin is not valid.
	*/
	static int gpio_gd32_configure_extiss(const struct device *port,
	gpio_pin_t pin)
	{
	const struct gpio_gd32_config *config = port->config;
	uint8_t port_index, shift;
	volatile uint32_t *extiss;

	switch (pin / EXTISS_STEP) {
	#ifdef CONFIG_GD32_HAS_AF_PINMUX
	case 0U:
	extiss = &SYSCFG_EXTISS0;
	break;
	case 1U:
	extiss = &SYSCFG_EXTISS1;
	break;
	case 2U:
	extiss = &SYSCFG_EXTISS2;
	break;
	case 3U:
	extiss = &SYSCFG_EXTISS3;
	break;
	#else
	case 0U:
	extiss = &AFIO_EXTISS0;
	break;
	case 1U:
	extiss = &AFIO_EXTISS1;
	break;
	case 2U:
	extiss = &AFIO_EXTISS2;
	break;
	case 3U:
	extiss = &AFIO_EXTISS3;
	break;
	#endif /* CONFIG_GD32_HAS_AF_PINMUX */
	default:
	return -EINVAL;
	}

	port_index = (config->reg - GPIOA) / (GPIOB - GPIOA);
	shift = EXTISS_LINE_SHIFT(pin);

	*extiss &= ~(EXTISS_MSK << shift);
	*extiss \|= port_index << shift;

	return 0;
	}

	static inline int gpio_gd32_configure(const struct device *port, gpio_pin_t pin,
	gpio_flags_t flags)
	{
	const struct gpio_gd32_config *config = port->config;

	#ifdef CONFIG_GD32_HAS_AF_PINMUX
	uint32_t ctl, pupd;

	ctl = GPIO_CTL(config->reg);
	ctl &= ~GPIO_MODE_MASK(pin);

	pupd = GPIO_PUD(config->reg);
	pupd &= ~GPIO_PUPD_MASK(pin);

	if ((flags & GPIO_OUTPUT) != 0U) {
	ctl \|= GPIO_MODE_SET(pin, GPIO_MODE_OUTPUT);

	if ((flags & GPIO_SINGLE_ENDED) != 0U) {
	if ((flags & GPIO_LINE_OPEN_DRAIN) != 0U) {
	GPIO_OMODE(config->reg) \|= BIT(pin);
	} else {
	return -ENOTSUP;
	}
	} else {
	GPIO_OMODE(config->reg) &= ~BIT(pin);
	}

	if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
	GPIO_BOP(config->reg) = BIT(pin);
	} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
	GPIO_BC(config->reg) = BIT(pin);
	}
	} else if ((flags & GPIO_INPUT) != 0U) {
	ctl \|= GPIO_MODE_SET(pin, GPIO_MODE_INPUT);
	} else {
	ctl \|= GPIO_MODE_SET(pin, GPIO_MODE_ANALOG);
	}

	if ((flags & GPIO_PULL_UP) != 0U) {
	pupd \|= GPIO_PUPD_SET(pin, GPIO_PUPD_PULLUP);
	} else if ((flags & GPIO_PULL_DOWN) != 0U) {
	pupd \|= GPIO_PUPD_SET(pin, GPIO_PUPD_PULLDOWN);
	} else {
	pupd \|= GPIO_PUPD_SET(pin, GPIO_PUPD_NONE);
	}

	GPIO_PUD(config->reg) = pupd;
	GPIO_CTL(config->reg) = ctl;
	#else
	volatile uint32_t *ctl_reg;
	uint32_t ctl, pin_bit;

	pin_bit = BIT(pin);

	if (pin < 8U) {
	ctl_reg = &GPIO_CTL0(config->reg);
	} else {
	ctl_reg = &GPIO_CTL1(config->reg);
	pin -= 8U;
	}

	ctl = *ctl_reg;
	ctl &= ~GPIO_MODE_MASK(pin);

	if ((flags & GPIO_OUTPUT) != 0U) {
	if ((flags & GPIO_SINGLE_ENDED) != 0U) {
	if ((flags & GPIO_LINE_OPEN_DRAIN) != 0U) {
	ctl \|= GPIO_MODE_SET(pin, CTL_MODE_OUT_OD);
	} else {
	return -ENOTSUP;
	}
	} else {
	ctl \|= GPIO_MODE_SET(pin, CTL_MODE_OUT_PP);
	}

	if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
	GPIO_BOP(config->reg) = pin_bit;
	} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
	GPIO_BC(config->reg) = pin_bit;
	}
	} else if ((flags & GPIO_INPUT) != 0U) {
	if ((flags & GPIO_PULL_UP) != 0U) {
	ctl \|= GPIO_MODE_SET(pin, CTL_MODE_INP_PUPD);
	GPIO_BOP(config->reg) = pin_bit;
	} else if ((flags & GPIO_PULL_DOWN) != 0U) {
	ctl \|= GPIO_MODE_SET(pin, CTL_MODE_INP_PUPD);
	GPIO_BC(config->reg) = pin_bit;
	} else {
	ctl \|= GPIO_MODE_SET(pin, CTL_MODE_INP_FLOAT);
	}
	} else {
	ctl \|= GPIO_MODE_SET(pin, CTL_MODE_ANALOG);
	}

	*ctl_reg = ctl;
	#endif /* CONFIG_GD32_HAS_AF_PINMUX */

	return 0;
	}

	static int gpio_gd32_port_get_raw(const struct device port, uint32_t value)
	{
	const struct gpio_gd32_config *config = port->config;

	*value = GPIO_ISTAT(config->reg);

	return 0;
	}

	static int gpio_gd32_port_set_masked_raw(const struct device *port,
	gpio_port_pins_t mask,
	gpio_port_value_t value)
	{
	const struct gpio_gd32_config *config = port->config;

	GPIO_OCTL(config->reg) =
	(GPIO_OCTL(config->reg) & ~mask) \| (value & mask);

	return 0;
	}

	static int gpio_gd32_port_set_bits_raw(const struct device *port,
	gpio_port_pins_t pins)
	{
	const struct gpio_gd32_config *config = port->config;

	GPIO_BOP(config->reg) = pins;

	return 0;
	}

	static int gpio_gd32_port_clear_bits_raw(const struct device *port,
	gpio_port_pins_t pins)
	{
	const struct gpio_gd32_config *config = port->config;

	GPIO_BC(config->reg) = pins;

	return 0;
	}

	static int gpio_gd32_port_toggle_bits(const struct device *port,
	gpio_port_pins_t pins)
	{
	const struct gpio_gd32_config *config = port->config;

	#ifdef CONFIG_GD32_HAS_AF_PINMUX
	GPIO_TG(config->reg) = pins;
	#else
	GPIO_OCTL(config->reg) ^= pins;
	#endif /* CONFIG_GD32_HAS_AF_PINMUX */

	return 0;
	}

	static int gpio_gd32_pin_interrupt_configure(const struct device *port,
	gpio_pin_t pin,
	enum gpio_int_mode mode,
	enum gpio_int_trig trig)
	{
	if (mode == GPIO_INT_MODE_DISABLED) {
	gd32_exti_disable(pin);
	(void)gd32_exti_configure(pin, NULL, NULL);
	gd32_exti_trigger(pin, GD32_EXTI_TRIG_NONE);
	} else if (mode == GPIO_INT_MODE_EDGE) {
	int ret;

	ret = gd32_exti_configure(pin, gpio_gd32_isr, (void *)port);
	if (ret < 0) {
	return ret;
	}

	ret = gpio_gd32_configure_extiss(port, pin);
	if (ret < 0) {
	return ret;
	}

	switch (trig) {
	case GPIO_INT_TRIG_LOW:
	gd32_exti_trigger(pin, GD32_EXTI_TRIG_FALLING);
	break;
	case GPIO_INT_TRIG_HIGH:
	gd32_exti_trigger(pin, GD32_EXTI_TRIG_RISING);
	break;
	case GPIO_INT_TRIG_BOTH:
	gd32_exti_trigger(pin, GD32_EXTI_TRIG_BOTH);
	break;
	default:
	return -ENOTSUP;
	}

	gd32_exti_enable(pin);
	} else {
	return -ENOTSUP;
	}

	return 0;
	}

	static int gpio_gd32_manage_callback(const struct device *dev,
	struct gpio_callback *callback, bool set)
	{
	struct gpio_gd32_data *data = dev->data;

	return gpio_manage_callback(&data->callbacks, callback, set);
	}

	static const struct gpio_driver_api gpio_gd32_api = {
	.pin_configure = gpio_gd32_configure,
	.port_get_raw = gpio_gd32_port_get_raw,
	.port_set_masked_raw = gpio_gd32_port_set_masked_raw,
	.port_set_bits_raw = gpio_gd32_port_set_bits_raw,
	.port_clear_bits_raw = gpio_gd32_port_clear_bits_raw,
	.port_toggle_bits = gpio_gd32_port_toggle_bits,
	.pin_interrupt_configure = gpio_gd32_pin_interrupt_configure,
	.manage_callback = gpio_gd32_manage_callback,
	};

	static int gpio_gd32_init(const struct device *port)
	{
	const struct gpio_gd32_config *config = port->config;

	(void)clock_control_on(GD32_CLOCK_CONTROLLER,
	(clock_control_subsys_t)&config->clkid);
	(void)clock_control_on(GD32_CLOCK_CONTROLLER,
	(clock_control_subsys_t)&config->clkid_exti);

	(void)reset_line_toggle_dt(&config->reset);

	return 0;
	}

	#define GPIO_GD32_DEFINE(n) \
	static const struct gpio_gd32_config gpio_gd32_config##n = { \
	.common = { \
	.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \
	}, \
	.reg = DT_INST_REG_ADDR(n), \
	.clkid = DT_INST_CLOCKS_CELL(n, id), \
	COND_CODE_1(DT_NODE_HAS_STATUS(SYSCFG_NODE, okay), \
	(.clkid_exti = DT_CLOCKS_CELL(SYSCFG_NODE, id),), \
	(.clkid_exti = DT_CLOCKS_CELL(AFIO_NODE, id),)) \
	.reset = RESET_DT_SPEC_INST_GET(n), \
	}; \
	\
	static struct gpio_gd32_data gpio_gd32_data##n; \
	\
	DEVICE_DT_INST_DEFINE(n, &gpio_gd32_init, NULL, &gpio_gd32_data##n, \
	&gpio_gd32_config##n, PRE_KERNEL_1, \
	CONFIG_GPIO_INIT_PRIORITY, &gpio_gd32_api);

	DT_INST_FOREACH_STATUS_OKAY(GPIO_GD32_DEFINE)