| # HW Info driver configuration options |
| |
| # Copyright (c) 2019 Alexander Wachter |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig HWINFO |
| bool "Hardware Information drivers" |
| help |
| Enable hwinfo driver. |
| |
| if HWINFO |
| |
| module = HWINFO |
| module-str = HWINFO |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config HWINFO_SHELL |
| bool "HWINFO Shell" |
| depends on SHELL |
| help |
| Enable hwinfo Shell for testing. |
| |
| menuconfig HWINFO_CC13XX_CC26XX |
| bool "TI SimpleLink CC13xx/CC26xx hwinfo driver" |
| default y |
| depends on SOC_SERIES_CC13X2_CC26X2 || SOC_SERIES_CC13X2X7_CC26X2X7 |
| help |
| Enable TI SimpleLink CC13xx/CC26xx hwinfo driver. |
| |
| if HWINFO_CC13XX_CC26XX |
| |
| config HWINFO_CC13XX_CC26XX_ALWAYS_USE_FACTORY_DEFAULT |
| bool "Ignore CCFG and always use factory value" |
| default y |
| help |
| Always return factory pre-programmed values, stored in FCFG and ignore |
| values provided in CCFG (Customer Configuration). |
| |
| choice |
| prompt "Select MAC address type for device ID" |
| default HWINFO_CC13XX_CC26XX_USE_IEEE_MAC |
| help |
| Specify the MAC address type to be used as device ID by the driver. |
| |
| config HWINFO_CC13XX_CC26XX_USE_IEEE_MAC |
| bool "Use IEEE 802.15.4 extended address" |
| help |
| Use 8-bytes length IEEE 802.15.4 extended address as device ID value. |
| |
| config HWINFO_CC13XX_CC26XX_USE_BLE_MAC |
| bool "Use BLE MAC address" |
| help |
| Use 6-bytes length BLE MAC address as device ID value. |
| |
| endchoice |
| |
| endif |
| |
| config HWINFO_STM32 |
| bool "STM32 hwinfo" |
| default y |
| depends on SOC_FAMILY_STM32 |
| help |
| Enable STM32 hwinfo driver. |
| |
| config HWINFO_NRF |
| bool "NRF device ID" |
| default y |
| depends on SOC_FAMILY_NORDIC_NRF |
| depends on NRF_SOC_SECURE_SUPPORTED |
| help |
| Enable Nordic NRF hwinfo driver. |
| |
| config HWINFO_MCUX_RCM |
| bool "NXP kinetis reset cause" |
| default y |
| depends on HAS_MCUX_RCM |
| help |
| Enable NXP kinetis mcux RCM hwinfo driver. |
| |
| config HWINFO_MCUX_SIM |
| bool "NXP kinetis SIM device ID" |
| default y |
| depends on HAS_MCUX_SIM |
| help |
| Enable NXP kinetis mcux SIM hwinfo driver. |
| |
| config HWINFO_MCUX_SRC |
| bool "NXP SRC reset cause" |
| default y |
| depends on HAS_MCUX_SRC |
| help |
| Enable NXP i.MX mcux SRC hwinfo driver. |
| |
| config HWINFO_MCUX_SRC_V2 |
| bool "NXP SRC reset cause (multicore devices)" |
| default y |
| depends on HAS_MCUX_SRC_V2 |
| help |
| Enable version 2 multicore NXP i.MX mcux SRC hwinfo driver. |
| |
| config HWINFO_MCUX_SYSCON |
| bool "NXP LPC device ID" |
| default y |
| depends on DT_HAS_NXP_LPC_UID_ENABLED |
| help |
| Enable NXP LPC mcux hwinfo driver. |
| |
| config HWINFO_IMXRT |
| bool "NXP i.mx RT device ID" |
| default y |
| depends on SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX |
| help |
| Enable NXP i.mx RT hwinfo driver. |
| |
| config HWINFO_RPI_PICO |
| bool "Raspberry Pi Pico hwinfo driver" |
| default y |
| depends on SOC_SERIES_RP2XXX |
| select PICOSDK_USE_FLASH |
| help |
| Enable Raspberry Pi Pico hwinfo driver. |
| |
| config HWINFO_SAM_RSTC |
| bool "Atmel SAM reset cause" |
| default y |
| depends on SOC_FAMILY_ATMEL_SAM && !SOC_SERIES_SAM4L |
| help |
| Enable Atmel SAM reset cause hwinfo driver. |
| |
| config HWINFO_SAM |
| bool "Atmel SAM device ID" |
| default y |
| depends on SOC_FAMILY_ATMEL_SAM && !SOC_SERIES_SAM4L |
| help |
| Enable Atmel SAM device ID hwinfo driver. |
| |
| config HWINFO_SAM4L |
| bool "Atmel SAM4L device ID" |
| default y |
| depends on SOC_SERIES_SAM4L |
| help |
| Enable Atmel SAM4L hwinfo driver. |
| |
| config HWINFO_SAM0 |
| bool "Atmel SAM0 device ID" |
| default y |
| depends on SOC_FAMILY_ATMEL_SAM0 |
| help |
| Enable Atmel SAM0 hwinfo driver. |
| |
| config HWINFO_SMARTBOND |
| bool "Smartbond device reset cause" |
| default y |
| depends on SOC_FAMILY_RENESAS_SMARTBOND |
| help |
| Enable Smartbond reset cause hwinfo driver. |
| |
| config HWINFO_ESP32 |
| bool "ESP32 device ID" |
| default y |
| depends on SOC_FAMILY_ESPRESSIF_ESP32 |
| help |
| Enable ESP32 hwinfo driver. |
| |
| config HWINFO_LITEX |
| bool "LiteX device ID" |
| default y |
| depends on SOC_LITEX_VEXRISCV |
| help |
| Enable LiteX hwinfo driver |
| |
| config HWINFO_PSOC6 |
| bool "Cypress PSoC-6 unique device ID" |
| default y |
| depends on SOC_FAMILY_PSOC6 |
| help |
| Enable Cypress PSoC-6 hwinfo driver. |
| |
| config HWINFO_GECKO |
| bool "GECKO hwinfo" |
| default y |
| depends on SOC_VENDOR_SILABS && !SOC_SERIES_EFR32MG21 && !SOC_SERIES_EFR32BG22 |
| select SOC_GECKO_RMU |
| help |
| Enable Silabs GECKO hwinfo driver. |
| |
| config HWINFO_ANDES |
| bool "Andes system ID" |
| default y |
| depends on SOC_FAMILY_ANDES_V5 |
| help |
| Enable Andes hwinfo driver |
| |
| config HWINFO_RW61X |
| bool "RW61X hwinfo" |
| default y |
| depends on SOC_SERIES_RW6XX |
| help |
| Enable RW61X hwinfo driver |
| |
| endif |
