| /* |
| * Copyright (c) 2023 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT intel_sedi_i2c |
| |
| #include <stdint.h> |
| #include <zephyr/drivers/i2c.h> |
| #include <zephyr/kernel.h> |
| #include <sedi_driver_i2c.h> |
| #include <zephyr/pm/device.h> |
| |
| #define I2C_SEDI_TIMEOUT_MS (1000) |
| |
| struct i2c_sedi_context { |
| DEVICE_MMIO_RAM; |
| int sedi_device; |
| struct k_sem *sem; |
| struct k_mutex *mutex; |
| int err; |
| uint16_t addr_10bit; |
| }; |
| |
| struct i2c_sedi_config { |
| DEVICE_MMIO_ROM; |
| sedi_i2c_event_cb_t cb_sedi; |
| void (*irq_config)(const struct device *dev); |
| }; |
| |
| static int i2c_sedi_api_configure(const struct device *dev, uint32_t dev_config) |
| { |
| int ret; |
| int speed = I2C_SPEED_GET(dev_config); |
| int sedi_speed; |
| struct i2c_sedi_context *const context = dev->data; |
| |
| context->addr_10bit = (dev_config & I2C_ADDR_10_BITS) ? SEDI_I2C_ADDRESS_10BIT : 0; |
| |
| if (speed == I2C_SPEED_STANDARD) { |
| sedi_speed = SEDI_I2C_BUS_SPEED_STANDARD; |
| } else if (speed == I2C_SPEED_FAST) { |
| sedi_speed = SEDI_I2C_BUS_SPEED_FAST; |
| } else if (speed == I2C_SPEED_FAST_PLUS) { |
| sedi_speed = SEDI_I2C_BUS_SPEED_FAST_PLUS; |
| } else if (speed == I2C_SPEED_HIGH) { |
| sedi_speed = SEDI_I2C_BUS_SPEED_HIGH; |
| } else { |
| return -EINVAL; |
| } |
| |
| k_mutex_lock(context->mutex, K_FOREVER); |
| ret = sedi_i2c_control(context->sedi_device, SEDI_I2C_BUS_SPEED, sedi_speed); |
| k_mutex_unlock(context->mutex); |
| |
| if (ret != 0) { |
| return -EIO; |
| } else { |
| return 0; |
| } |
| } |
| |
| static int i2c_sedi_api_full_io(const struct device *dev, struct i2c_msg *msgs, uint8_t num_msgs, |
| uint16_t addr) |
| { |
| int ret = 0; |
| struct i2c_sedi_context *context = dev->data; |
| |
| if (!num_msgs) { |
| return 0; |
| } |
| __ASSERT_NO_MSG(msgs); |
| |
| k_mutex_lock(context->mutex, K_FOREVER); |
| pm_device_busy_set(dev); |
| |
| for (int i = 0; i < num_msgs; i++) { |
| if ((msgs[i].flags & I2C_MSG_RW_MASK) == I2C_MSG_WRITE) { |
| ret = sedi_i2c_master_write_async( |
| context->sedi_device, addr | context->addr_10bit, msgs[i].buf, |
| msgs[i].len, (msgs[i].flags & I2C_MSG_STOP) == 0x0); |
| } else { |
| ret = sedi_i2c_master_read_async( |
| context->sedi_device, addr | context->addr_10bit, msgs[i].buf, |
| msgs[i].len, (msgs[i].flags & I2C_MSG_STOP) == 0x0); |
| } |
| if (ret != 0) { |
| ret = -EIO; |
| break; |
| } |
| |
| ret = k_sem_take(context->sem, K_MSEC(I2C_SEDI_TIMEOUT_MS)); |
| if (ret != 0) { |
| break; |
| } |
| |
| if (context->err != 0) { |
| ret = -EIO; |
| break; |
| } |
| } |
| |
| if (ret != 0) { |
| /* Abort current transfer */ |
| sedi_i2c_control(context->sedi_device, SEDI_I2C_ABORT_TRANSFER, 0); |
| ret = -EIO; |
| } |
| pm_device_busy_clear(dev); |
| k_mutex_unlock(context->mutex); |
| |
| return ret; |
| } |
| |
| static const struct i2c_driver_api i2c_sedi_apis = { |
| .configure = i2c_sedi_api_configure, |
| .transfer = i2c_sedi_api_full_io |
| }; |
| |
| #ifdef CONFIG_PM_DEVICE |
| |
| static int i2c_sedi_suspend_device(const struct device *dev) |
| { |
| struct i2c_sedi_context *const context = dev->data; |
| int ret; |
| |
| if (pm_device_is_busy(dev)) { |
| return -EBUSY; |
| } |
| |
| ret = sedi_i2c_set_power(context->sedi_device, SEDI_POWER_SUSPEND); |
| |
| if (ret != 0) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int i2c_sedi_resume_device_from_suspend(const struct device *dev) |
| { |
| struct i2c_sedi_context *const context = dev->data; |
| int ret; |
| |
| ret = sedi_i2c_set_power(context->sedi_device, SEDI_POWER_FULL); |
| if (ret != 0) { |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int i2c_sedi_pm_action(const struct device *dev, enum pm_device_action action) |
| { |
| int ret = 0; |
| |
| switch (action) { |
| case PM_DEVICE_ACTION_SUSPEND: |
| ret = i2c_sedi_suspend_device(dev); |
| break; |
| case PM_DEVICE_ACTION_RESUME: |
| ret = i2c_sedi_resume_device_from_suspend(dev); |
| break; |
| |
| default: |
| ret = -ENOTSUP; |
| } |
| |
| return ret; |
| } |
| |
| #endif /* CONFIG_PM_DEVICE */ |
| |
| static int i2c_sedi_init(const struct device *dev) |
| { |
| int ret; |
| const struct i2c_sedi_config *const config = dev->config; |
| struct i2c_sedi_context *const context = dev->data; |
| |
| DEVICE_MMIO_MAP(dev, K_MEM_CACHE_NONE); |
| |
| ret = sedi_i2c_init(context->sedi_device, config->cb_sedi, DEVICE_MMIO_GET(dev)); |
| if (ret != 0) { |
| return -EIO; |
| } |
| |
| ret = sedi_i2c_set_power(context->sedi_device, SEDI_POWER_FULL); |
| if (ret != 0) { |
| return -EIO; |
| } |
| |
| config->irq_config(dev); |
| |
| return 0; |
| } |
| |
| static void i2c_sedi_isr(const struct device *dev) |
| { |
| struct i2c_sedi_context *const context = dev->data; |
| |
| sedi_i2c_isr_handler(context->sedi_device); |
| } |
| |
| #define I2C_SEDI_IRQ_FLAGS_SENSE0(n) 0 |
| #define I2C_SEDI_IRQ_FLAGS_SENSE1(n) DT_INST_IRQ(n, sense) |
| #define I2C_SEDI_IRQ_FLAGS(n) _CONCAT(I2C_SEDI_IRQ_FLAGS_SENSE, DT_INST_IRQ_HAS_CELL(n, sense))(n) |
| |
| #define I2C_DEVICE_INIT_SEDI(n) \ |
| static K_SEM_DEFINE(i2c_sedi_sem_##n, 0, 1); \ |
| static K_MUTEX_DEFINE(i2c_sedi_mutex_##n); \ |
| static struct i2c_sedi_context i2c_sedi_data_##n = { \ |
| .sedi_device = DT_INST_PROP(n, peripheral_id), \ |
| .sem = &i2c_sedi_sem_##n, \ |
| .mutex = &i2c_sedi_mutex_##n, \ |
| }; \ |
| static void i2c_sedi_callback_##n(const uint32_t event) \ |
| { \ |
| if (event == SEDI_I2C_EVENT_TRANSFER_DONE) { \ |
| i2c_sedi_data_##n.err = 0; \ |
| } else { \ |
| i2c_sedi_data_##n.err = 1; \ |
| } \ |
| k_sem_give(i2c_sedi_data_##n.sem); \ |
| }; \ |
| static void i2c_sedi_irq_config_##n(const struct device *dev) \ |
| { \ |
| ARG_UNUSED(dev); \ |
| IRQ_CONNECT(DT_INST_IRQN(n), DT_INST_IRQ(n, priority), i2c_sedi_isr, \ |
| DEVICE_DT_INST_GET(n), I2C_SEDI_IRQ_FLAGS(n)); \ |
| irq_enable(DT_INST_IRQN(n)); \ |
| }; \ |
| static const struct i2c_sedi_config i2c_sedi_config_##n = { \ |
| DEVICE_MMIO_ROM_INIT(DT_DRV_INST(n)), \ |
| .cb_sedi = &i2c_sedi_callback_##n, \ |
| .irq_config = &i2c_sedi_irq_config_##n, \ |
| }; \ |
| PM_DEVICE_DT_DEFINE(DT_NODELABEL(i2c##n), i2c_sedi_pm_action); \ |
| I2C_DEVICE_DT_INST_DEFINE(n, i2c_sedi_init, PM_DEVICE_DT_GET(DT_NODELABEL(i2c##n)), \ |
| &i2c_sedi_data_##n, &i2c_sedi_config_##n, PRE_KERNEL_2, \ |
| CONFIG_I2C_INIT_PRIORITY, &i2c_sedi_apis); |
| |
| DT_INST_FOREACH_STATUS_OKAY(I2C_DEVICE_INIT_SEDI) |