blob: 860cedddeda5f0c8661a0ecd5ff656aba76d3790 [file] [log] [blame]
/*
* Copyright (c) 2020 TriaGnoSys GmbH
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <arm/armv8-m.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <arm/silabs/gpio_gecko.h>
#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/pinctrl/gecko-pinctrl.h>
#include <dt-bindings/adc/adc.h>
#include <freq.h>
/ {
chosen {
zephyr,flash-controller = &msc;
zephyr,entropy = &se;
};
clocks {
clk_hfxo: clk-hfxo {
#clock-cells = <0>;
compatible = "silabs,hfxo";
clock-frequency = <DT_FREQ_M(39)>;
ctune = <140>;
precision = <50>;
};
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-m33";
reg = <0>;
cpu-power-states = <&pstate_em1 &pstate_em2 &pstate_em3>;
};
power-states {
/*
* EM1 is a basic "CPU WFI idle", all high-freq clocks remain
* enabled.
*/
pstate_em1: em1 {
compatible = "zephyr,power-state";
power-state-name = "runtime-idle";
min-residency-us = <4>;
/* HFXO remains active */
exit-latency-us = <2>;
};
/*
* EM2 is a deepsleep with HF clocks disabled by HW, voltages
* scaled down, etc.
*/
pstate_em2: em2 {
compatible = "zephyr,power-state";
power-state-name = "suspend-to-idle";
min-residency-us = <260>;
exit-latency-us = <250>;
};
/*
* EM3 seems to be exactly the same as EM2 except that
* LFXO & LFRCO should be disabled, so you must use ULFRCO
* as BURTC clock for the system to not lose track of time and
* wake up.
*/
pstate_em3: em3 {
compatible = "zephyr,power-state";
power-state-name = "standby";
min-residency-us = <20000>;
exit-latency-us = <2000>;
};
};
};
sram0: memory@20000000 {
device_type = "memory";
compatible = "mmio-sram";
};
soc {
msc: flash-controller@50030000 {
compatible = "silabs,gecko-flash-controller";
reg = <0x50030000 0x3148>;
interrupts = <50 0>;
#address-cells = <1>;
#size-cells = <1>;
flash0: flash@0 {
compatible = "soc-nv-flash";
write-block-size = <4>;
erase-block-size = <8192>;
};
};
usart0: usart@5005c000 {
compatible = "silabs,gecko-usart";
reg = <0x5005C000 0x306c>;
interrupts = <9 0>, <10 0>;
interrupt-names = "rx", "tx";
peripheral-id = <0>;
status = "disabled";
};
burtc0: burtc@50064000 {
compatible = "silabs,gecko-burtc";
reg = <0x50064000 0x3034>;
interrupts = <17 0>;
status = "disabled";
};
se: semailbox@5c021000 {
compatible = "silabs,gecko-semailbox";
reg = <0x5c021000 0x1000>;
status = "disabled";
interrupts = <64 3>, <65 3>, <66 3>;
interrupt-names = "SETAMPERHOST", "SEMBRX", "SEMBTX";
};
i2c0: i2c@5b000000 {
compatible = "silabs,gecko-i2c";
clock-frequency = <I2C_BITRATE_STANDARD>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x5b000000 0x3044>;
interrupts = <27 0>;
status = "disabled";
};
stimer0: stimer@500a8000 {
compatible = "silabs,gecko-stimer";
reg = <0x500a8000 0x3054>;
interrupts = <67 0>;
clock-frequency = <32768>;
prescaler = <1>;
status = "disabled";
};
gpio: gpio@5003c000 {
compatible = "silabs,gecko-gpio";
reg = <0x5003c000 0x4000>;
interrupts = <26 2>, <25 2>;
interrupt-names = "GPIO_EVEN", "GPIO_ODD";
ranges;
#address-cells = <1>;
#size-cells = <1>;
gpioa: gpio@5003c030 {
compatible = "silabs,gecko-gpio-port";
reg = <0x5003c030 0x30>;
peripheral-id = <0>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
gpiob: gpio@5003c060 {
compatible = "silabs,gecko-gpio-port";
reg = <0x5003c060 0x30>;
peripheral-id = <1>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
gpioc: gpio@5003c090 {
compatible = "silabs,gecko-gpio-port";
reg = <0x5003c090 0x30>;
peripheral-id = <2>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
gpiod: gpio@5003c0C0 {
compatible = "silabs,gecko-gpio-port";
reg = <0x5003c0C0 0x30>;
peripheral-id = <3>;
gpio-controller;
#gpio-cells = <2>;
status = "disabled";
};
};
wdog0: wdog@5b004000 {
compatible = "silabs,gecko-wdog";
reg = <0x5b004000 0x2C>;
peripheral-id = <0>;
interrupts = <42 0>;
status = "disabled";
};
wdog1: wdog@5b008000 {
compatible = "silabs,gecko-wdog";
reg = <0x5b008000 0x2C>;
peripheral-id = <1>;
interrupts = <43 0>;
status = "disabled";
};
adc0: adc@59004000 {
compatible = "silabs,gecko-iadc";
reg = <0x59004000 0x4000>;
interrupts = <49 0>;
status = "disabled";
#io-channel-cells = <1>;
};
};
};
/ {
pinctrl: pin-controller {
/* Pin controller is a "virtual" device since SiLabs SoCs do pin
* control in a distributed way (GPIO registers and PSEL
* registers on each peripheral).
*/
compatible = "silabs,gecko-pinctrl";
};
hwinfo: hwinfo {
compatible = "silabs,gecko-hwinfo";
status = "disabled";
};
};
&nvic {
arm,num-irq-priority-bits = <4>;
};