soc/renesas/rzt2m/soc.h

/*
 * Copyright (c) 2023 Antmicro <www.antmicro.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#ifndef _SOC__H_
#define _SOC__H_

/* Do not let CMSIS to handle GIC and Timer */
#include <stdint.h>
#define __GIC_PRESENT 0
#define __TIM_PRESENT 0

/* Global system counter */
#define CNTCR_EN   BIT(0)
#define CNTCR_HDBG BIT(1)

/* Safety area protect register */
#define PRCRS_CLK       BIT(0)
#define PRCRS_LPC_RESET BIT(1)
#define PRCRS_GPIO      BIT(2)
#define PRCRS_SYS_CTRL  BIT(3)

/* Non-safety area protect register */
#define PRCRN_PRC0 BIT(0)
#define PRCRN_PRC1 BIT(1)
#define PRCRN_PRC2 BIT(2)

#define SCI4ASYNCSEL BIT(31)
#define SCI3ASYNCSEL BIT(30)
#define SCI2ASYNCSEL BIT(29)
#define SCI1ASYNCSEL BIT(28)
#define SCI0ASYNCSEL BIT(27)
#define SPI2ASYNCSEL BIT(26)
#define SPI1ASYNCSEL BIT(25)
#define SPI0ASYNCSEL BIT(24)
#define CLMASEL      BIT(22)
#define PHYSEL       BIT(21)
#define FSELCANFD    BIT(20)
#define DIVSELXSPI1  BIT(14)
#define DIVSELXSPI0  BIT(6)

#define CKIO_DEFAULT      BIT(17)
#define FSELXSPI1_DEFAULT GENMASK(10, 9)
#define FSELXSPI0_DEFAULT GENMASK(2, 1)

#define SCI5ASYNCSEL     BIT(25)
#define SPI3ASYNCSEL     BIT(24)
#define DIVSELSUB        BIT(5)
#define FSELCPU1_DEFAULT 0b10 << 2
#define FSELCPU0_DEFAULT 0b10 << 0

/* PRC Key Code - this value is required to allow any write operation
 * to the PRCRS / PRCRN registers.
 * See section 10.2 of the RZ/T2M User's Manual: Hardware.
 */
#define PRC_KEY_CODE 0xa500

void rzt2m_unlock_prcrn(uint32_t mask);
void rzt2m_lock_prcrn(uint32_t mask);
void rzt2m_unlock_prcrs(uint32_t mask);
void rzt2m_lock_prcrs(uint32_t mask);

void rzt2m_set_sckcr2(uint32_t mask);
uint32_t rzt2m_get_sckcr2(void);
void rzt2m_set_sckcr(uint32_t mask);
uint32_t rzt2m_get_sckcr(void);

#endif /* _SOC__H_ */