| /* |
| * Copyright (c) 2018 Philémon Jaermann |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <st/f4/stm32f401.dtsi> |
| #include <zephyr/dt-bindings/memory-controller/stm32-fmc-sdram.h> |
| |
| / { |
| soc { |
| i2s1: i2s@40013000 { |
| compatible = "st,stm32-i2s"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40013000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00001000>; |
| interrupts = <35 5>; |
| dmas = <&dma2 3 3 0x400 0x3 |
| &dma2 2 3 0x400 0x3>; |
| dma-names = "tx", "rx"; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@40004800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>; |
| interrupts = <39 0>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@40004c00 { |
| compatible ="st,stm32-uart"; |
| reg = <0x40004c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>; |
| interrupts = <52 0>; |
| status = "disabled"; |
| }; |
| |
| uart5: serial@40005000 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40005000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>; |
| interrupts = <53 0>; |
| status = "disabled"; |
| }; |
| |
| can1: can@40006400 { |
| compatible = "st,stm32-can"; |
| reg = <0x40006400 0x400>; |
| interrupts = <19 0>, <20 0>, <21 0>, <22 0>; |
| interrupt-names = "TX", "RX0", "RX1", "SCE"; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>; |
| status = "disabled"; |
| sjw = <1>; |
| sample-point = <875>; |
| }; |
| |
| can2: can@40006800 { |
| compatible = "st,stm32-can"; |
| reg = <0x40006800 0x400>; |
| interrupts = <63 0>, <64 0>, <65 0>, <66 0>; |
| interrupt-names = "TX", "RX0", "RX1", "SCE"; |
| /* also enabling clock for can1 (master instance) */ |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x06000000>; |
| master-can-reg = <0x40006400>; |
| status = "disabled"; |
| sjw = <1>; |
| sample-point = <875>; |
| }; |
| |
| usbotg_fs: usb@50000000 { |
| num-bidir-endpoints = <6>; |
| }; |
| |
| usbotg_hs: usb@40040000 { |
| compatible = "st,stm32-otghs"; |
| reg = <0x40040000 0x40000>; |
| interrupts = <77 0>, <74 0>, <75 0>; |
| interrupt-names = "otghs", "ep1_out", "ep1_in"; |
| num-bidir-endpoints = <9>; |
| ram-size = <4096>; |
| maximum-speed = "full-speed"; |
| phys = <&otghs_fs_phy>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x20000000>; |
| status = "disabled"; |
| }; |
| |
| backup_sram: memory@40024000 { |
| compatible = "zephyr,memory-region", "st,stm32-backup-sram"; |
| reg = <0x40024000 DT_SIZE_K(4)>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00040000>; |
| zephyr,memory-region = "BACKUP_SRAM"; |
| status = "disabled"; |
| }; |
| |
| dac1: dac@40007400 { |
| compatible = "st,stm32-dac"; |
| reg = <0x40007400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x20000000>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| fmc: memory-controller@a0000000 { |
| compatible = "st,stm32-fmc"; |
| reg = <0xa0000000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB3 0x00000001>; |
| status = "disabled"; |
| |
| sdram: sdram { |
| compatible = "st,stm32-fmc-sdram"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| otghs_fs_phy: otghs_fs_phy { |
| compatible = "usb-nop-xceiv"; |
| #phy-cells = <0>; |
| }; |
| }; |