blob: c115f28adc2a0105232d05c5b09a037aea0f4fb7 [file] [log] [blame]
:orphan:
.. _zephyr_1.11:
Zephyr Kernel 1.11.0
#####################
We are pleased to announce the release of Zephyr kernel version 1.11.0.
Major enhancements with this release include:
* Thread-level memory protection on x86, ARC and Arm, userspace and memory
domains
* Symmetric Multi Processing (SMP) support on the Xtensa architecture.
* Initial Armv8-M architecture support.
* Native development environment on Microsoft Windows.
* Native build target on POSIX platforms.
* POSIX PSE52 partial support.
* Thread support via integration with OpenThread.
* Firmware over-the-air (FOTA) updates over BLE using MCUmgr.
* Lightweight flash storage layer for constrained devices.
* Additional SoC, platform and driver support for many of the already supported
platforms.
The following sections provide detailed lists of changes by component.
Kernel
******
* Initial Symmetric Multi Processing (SMP) support added:
* SMP-aware scheduler
* SMP timer and idling support
* Available on the Xtensa architecture
* POSIX PSE52 support:
* Timer, clock, scheduler and pthread APIs
Architectures
*************
* User space and system call related changes:
* Added ARC user space implementation
* Added Arm user space implementation
* Fixed a few MPU related issues with stack guards
* Armv8-M initial architecture support, including the following cores:
* Arm Cortex-M23
* Arm Cortex-M33
* New POSIX architecture for native GNU/Linux and macOS build targets:
* Targets native executables that can be run on the host operating system
Boards
******
* New native_posix board for the POSIX architecture:
* Includes a template for hardware models
* Adds support for console and logging
* Interrupts and timers are simulated in several different configurations
* Added support for the following Arm boards:
* adafruit_trinket_m0
* arduino_zero
* lpcxpresso54114
* nrf52_sparkfun
* nucleo_f429zi
* stm32f072_eval
* stm32f072b_disco
* Removed Panther board support, which included boards/x86/panther and
boards/arc/panther_ss
* Refactored dts.fixup so common SoC-related fixes are in arch/<*>/soc
and board dts.fixup is only used for board-specific items.
Drivers and Sensors
*******************
* New LED PWM driver for ESP32 SoC
* Fixed ESP32 I2C driver
* Added I2C master, QSPI flash, and GPIO drivers for nios-II
* Added PinMux, GPIO, serial drivers for LPC54114
* Added PinMux, GPIO, serial, SPI, and watchdog drivers for sam0
* Added APA102 and WS2821B led_strip drivers
* Added native entropy driver
* Moved some sensors to dts
* Added AMG88xx, CCS811, and VL53L0x sensor drivers
* Redefined SENSOR_CHAN_HUMIDITY in percent
Networking
**********
* Generic OpenThread support added
* OpenThread support to nRF5 IEEE 802.15.4 driver added
* NXP MCUX ethernet driver IPv6 multicast join/leave enhancements
* Ethernet STM32 fixes
* IEEE 802.15.4 Sub-GHz TI CC1200 chip support added
* IEEE 802.15.4 test driver (upipe) hw filtering support added
* IEEE 802.15.4 radio API enhancements
* Net loopback driver fixes
* Net management API event enhancements
* IPv6 neighbor addition and removal can be monitored
* Static IPv4 and DHCPv4 configuration enhancements
* Bluetooth IPSP disconnect fix
* Network buffer enhancements
* ICMPv4 and ICMPv6 error checking fixes
* Network interface address handling enhancements
* Add routing support between network interfaces
* LWM2M fixes and enhancements
* Old legacy HTTP API removed
* Old legacy ZoAP API removed
* CoAP fixes
* TCP fixes
* HTTP fixes
* RPL fixes
* Net-app API fixes
* Net-shell fixes
* BSD socket API fixes
Bluetooth
*********
* Multiple fixes to the controller
* Fixed potential connection transmission deadlock issue with the help
of a dedicated fragment pool
* Multiple fixes to Mesh support
* Added test automation for Mesh (for tests/bluetooth/tester)
Build and Infrastructure
************************
* Native development environment on Microsoft Windows:
* Uses CMake and Kconfiglib to avoid requiring an emulation layer
* Package management support with Chocolatey for simple setup
* Build time now comparable to Linux and macOS using Ninja
Libraries / Subsystems
***********************
* New management subsystem based on the cross-RTOS MCUmgr:
* Secure Firmware Updates over BLE and serial
* Support for file system access and statistics
* mcumgr cross-platform command-line tool
* FCB (File Circular Buffer) lightweight storage layer:
* Wear-leveling support for NOR flashes
* Suitable for memory constrained devices
HALs
****
* Updated Arm CMSIS from version 4.5.0 to 5.2.0
* Updated stm32cube stm32l4xx from version 1.9.0 to 1.10.0
* Updated stm32cube stm32f4xx from version 1.16.0 to 1.18.0
* Added Atmel SAMD21 HAL
* Added mcux 2.2.1 for LPC54114
* Added HAL for VL53L0x sensor from STM
* Imported and moved to nRFx 0.8.0 on Nordic SoCs
* Added QSPI Controller HAL driver
Documentation
*************
* Added MPU specific stack and userspace documentation
* Improved docs for Native (POSIX) support
* Docs for new samples and supported board
* General documentation clarifications and improvements
* Identify daily-built master-branch docs as "Latest" version
* Addressed Sphinx-generated intra-page link issues
* Updated doc generation tools (Doxygen, Sphinx, Breathe, Docutils)
Tests and Samples
*****************
* Added additional tests and test improvements for user space testing
Issue Related Items
*******************
These GitHub issues were addressed since the previous 1.10.0 tagged
release:
.. comment List derived from Jira/GitHub Issue query: ...