| /* |
| * Copyright (c) 2019-2021 Linaro Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| sysclk: system-clock { |
| compatible = "fixed-clock"; |
| clock-frequency = <25000000>; |
| #clock-cells = <0>; |
| }; |
| |
| gpio0: gpio@1100000 { |
| compatible = "arm,cmsdk-gpio"; |
| reg = <0x1100000 0x1000>; |
| interrupts = <69 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| label = "GPIO_0"; |
| }; |
| |
| gpio1: gpio@1101000 { |
| compatible = "arm,cmsdk-gpio"; |
| reg = <0x1101000 0x1000>; |
| interrupts = <70 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| label = "GPIO_1"; |
| }; |
| |
| gpio2: gpio@1102000 { |
| compatible = "arm,cmsdk-gpio"; |
| reg = <0x1102000 0x1000>; |
| interrupts = <71 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| label = "GPIO_2"; |
| }; |
| |
| gpio3: gpio@1103000 { |
| compatible = "arm,cmsdk-gpio"; |
| reg = <0x1103000 0x1000>; |
| interrupts = <72 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| label = "GPIO_3"; |
| }; |
| |
| eth0: eth@1400000 { |
| /* Linux has "smsc,lan9115" */ |
| compatible = "smsc,lan9220"; |
| /* Actual reg range is ~0x200 */ |
| reg = <0x1400000 0x100000>; |
| label = "eth0"; |
| interrupts = <49 3>; |
| }; |
| |
| i2c_touch: i2c@9200000 { |
| compatible = "arm,versatile-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9200000 0x1000>; |
| label = "I2C_TOUCH"; |
| }; |
| |
| i2c_audio_conf: i2c@9201000 { |
| compatible = "arm,versatile-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9201000 0x1000>; |
| label = "I2C_AUDIO_CONF"; |
| }; |
| |
| i2c_shield0: i2c@9203000 { |
| compatible = "arm,versatile-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9203000 0x1000>; |
| label = "I2C_SHIELD0"; |
| }; |
| |
| i2c_shield1: i2c@9204000 { |
| compatible = "arm,versatile-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9204000 0x1000>; |
| label = "I2C_SHIELD1"; |
| }; |
| |
| i2c_ddr4_eeprom: i2c@9208000 { |
| compatible = "arm,versatile-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x9208000 0x1000>; |
| label = "DDR4_EEPROM"; |
| }; |
| |
| gpio_led0: mps3_fpgaio@9302000 { |
| compatible = "arm,mps3-fpgaio-gpio"; |
| |
| reg = <0x9302000 0x4>; |
| gpio-controller; |
| #gpio-cells = <1>; |
| ngpios = <8>; |
| label = "FPGA_LED0"; |
| }; |
| |
| gpio_button: mps3_fpgaio@9302008 { |
| compatible = "arm,mps3-fpgaio-gpio"; |
| |
| reg = <0x9302008 0x4>; |
| gpio-controller; |
| #gpio-cells = <1>; |
| ngpios = <2>; |
| label = "FPGA_BUTTON"; |
| }; |
| |
| gpio_misc: mps3_fpgaio@930204c { |
| compatible = "arm,mps3-fpgaio-gpio"; |
| |
| reg = <0x930204c 0x4>; |
| gpio-controller; |
| #gpio-cells = <1>; |
| ngpios = <3>; |
| label = "FPGA_MISC"; |
| }; |
| |
| uart0: uart@9303000 { |
| compatible = "arm,cmsdk-uart"; |
| reg = <0x9303000 0x1000>; |
| interrupts = <34 3 33 3>; |
| interrupt-names = "tx", "rx"; |
| clocks = <&sysclk>; |
| current-speed = <115200>; |
| label = "UART_0"; |
| }; |
| |
| uart1: uart@9304000 { |
| compatible = "arm,cmsdk-uart"; |
| reg = <0x9304000 0x1000>; |
| interrupts = <36 3 35 3>; |
| interrupt-names = "tx", "rx"; |
| clocks = <&sysclk>; |
| current-speed = <115200>; |
| label = "UART_1"; |
| }; |
| |
| uart2: uart@9305000 { |
| compatible = "arm,cmsdk-uart"; |
| reg = <0x9305000 0x1000>; |
| interrupts = <38 3 37 3>; |
| interrupt-names = "tx", "rx"; |
| clocks = <&sysclk>; |
| current-speed = <115200>; |
| label = "UART_2"; |
| }; |
| |
| uart3: uart@9306000 { |
| compatible = "arm,cmsdk-uart"; |
| reg = <0x9306000 0x1000>; |
| interrupts = <40 3 39 3>; |
| interrupt-names = "tx", "rx"; |
| clocks = <&sysclk>; |
| current-speed = <115200>; |
| label = "UART_3"; |
| }; |
| |
| uart4: uart@9307000 { |
| compatible = "arm,cmsdk-uart"; |
| reg = <0x9307000 0x1000>; |
| interrupts = <42 3 41 3>; |
| interrupt-names = "tx", "rx"; |
| clocks = <&sysclk>; |
| current-speed = <115200>; |
| label = "UART_4"; |
| }; |
| |
| uart5: uart@9308000 { |
| compatible = "arm,cmsdk-uart"; |
| status = "disabled"; |
| reg = <0x9308000 0x1000>; |
| interrupt-names = "tx", "rx"; |
| interrupts = <126 3 125 3>; |
| clocks = <&sysclk>; |
| current-speed = <115200>; |
| label = "UART_5"; |
| }; |
