| /* |
| * Copyright (c) 2015 Intel Corporation. |
| * Copyright (c) 2023 Synopsys, Inc. All rights reserved. |
| * Copyright (c) 2023 Meta Platforms |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT snps_designware_spi |
| |
| /* spi_dw.c - Designware SPI driver implementation */ |
| |
| #define LOG_LEVEL CONFIG_SPI_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(spi_dw); |
| |
| #include <errno.h> |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/arch/cpu.h> |
| |
| #include <zephyr/device.h> |
| #include <zephyr/init.h> |
| #include <zephyr/pm/device.h> |
| |
| #include <zephyr/sys/sys_io.h> |
| #include <zephyr/sys/util.h> |
| |
| #ifdef CONFIG_IOAPIC |
| #include <zephyr/drivers/interrupt_controller/ioapic.h> |
| #endif |
| |
| #include <zephyr/drivers/spi.h> |
| #include <zephyr/drivers/spi/rtio.h> |
| #include <zephyr/irq.h> |
| |
| #include "spi_dw.h" |
| #include "spi_context.h" |
| |
| #ifdef CONFIG_PINCTRL |
| #include <zephyr/drivers/pinctrl.h> |
| #endif |
| |
| static inline bool spi_dw_is_slave(struct spi_dw_data *spi) |
| { |
| return (IS_ENABLED(CONFIG_SPI_SLAVE) && |
| spi_context_is_slave(&spi->ctx)); |
| } |
| |
| static void completed(const struct device *dev, int error) |
| { |
| struct spi_dw_data *spi = dev->data; |
| struct spi_context *ctx = &spi->ctx; |
| |
| if (error) { |
| goto out; |
| } |
| |
| if (spi_context_tx_on(&spi->ctx) || |
| spi_context_rx_on(&spi->ctx)) { |
| return; |
| } |
| |
| out: |
| /* need to give time for FIFOs to drain before issuing more commands */ |
| while (test_bit_sr_busy(dev)) { |
| } |
| |
| /* Disabling interrupts */ |
| write_imr(dev, DW_SPI_IMR_MASK); |
| /* Disabling the controller */ |
| clear_bit_ssienr(dev); |
| |
| if (!spi_dw_is_slave(spi)) { |
| if (spi_cs_is_gpio(ctx->config)) { |
| spi_context_cs_control(ctx, false); |
| } else { |
| write_ser(dev, 0); |
| } |
| } |
| |
| LOG_DBG("SPI transaction completed %s error", |
| error ? "with" : "without"); |
| |
| spi_context_complete(&spi->ctx, dev, error); |
| } |
| |
| static void push_data(const struct device *dev) |
| { |
| const struct spi_dw_config *info = dev->config; |
| struct spi_dw_data *spi = dev->data; |
| uint32_t data = 0U; |
| uint32_t f_tx; |
| |
| if (spi_context_rx_on(&spi->ctx)) { |
| f_tx = info->fifo_depth - read_txflr(dev) - |
| read_rxflr(dev); |
| if ((int)f_tx < 0) { |
| f_tx = 0U; /* if rx-fifo is full, hold off tx */ |
| } |
| } else { |
| f_tx = info->fifo_depth - read_txflr(dev); |
| } |
| |
| while (f_tx) { |
| if (spi_context_tx_buf_on(&spi->ctx)) { |
| switch (spi->dfs) { |
| case 1: |
| data = UNALIGNED_GET((uint8_t *) |
| (spi->ctx.tx_buf)); |
| break; |
| case 2: |
| data = UNALIGNED_GET((uint16_t *) |
| (spi->ctx.tx_buf)); |
| break; |
| case 4: |
| data = UNALIGNED_GET((uint32_t *) |
| (spi->ctx.tx_buf)); |
| break; |
| } |
| } else if (spi_context_rx_on(&spi->ctx)) { |
| /* No need to push more than necessary */ |
| if ((int)(spi->ctx.rx_len - spi->fifo_diff) <= 0) { |
| break; |
| } |
| |
| data = 0U; |
| } else if (spi_context_tx_on(&spi->ctx)) { |
| data = 0U; |
| } else { |
| /* Nothing to push anymore */ |
| break; |
| } |
| |
| write_dr(dev, data); |
| |
| spi_context_update_tx(&spi->ctx, spi->dfs, 1); |
| spi->fifo_diff++; |
| |
| f_tx--; |
| } |
| |
| if (!spi_context_tx_on(&spi->ctx)) { |
| /* prevents any further interrupts demanding TX fifo fill */ |
| write_txftlr(dev, 0); |
| } |
| } |
| |
| static void pull_data(const struct device *dev) |
| { |
| const struct spi_dw_config *info = dev->config; |
| struct spi_dw_data *spi = dev->data; |
| |
| while (read_rxflr(dev)) { |
| uint32_t data = read_dr(dev); |
| |
| if (spi_context_rx_buf_on(&spi->ctx)) { |
| switch (spi->dfs) { |
| case 1: |
| UNALIGNED_PUT(data, (uint8_t *)spi->ctx.rx_buf); |
| break; |
| case 2: |
| UNALIGNED_PUT(data, (uint16_t *)spi->ctx.rx_buf); |
| break; |
| case 4: |
| UNALIGNED_PUT(data, (uint32_t *)spi->ctx.rx_buf); |
| break; |
| } |
| } |
| |
| spi_context_update_rx(&spi->ctx, spi->dfs, 1); |
| spi->fifo_diff--; |
| } |
| |
| if (!spi->ctx.rx_len && spi->ctx.tx_len < info->fifo_depth) { |
| write_rxftlr(dev, spi->ctx.tx_len - 1); |
| } else if (read_rxftlr(dev) >= spi->ctx.rx_len) { |
| write_rxftlr(dev, spi->ctx.rx_len - 1); |
| } |
| } |
| |
| static int spi_dw_configure(const struct device *dev, |
| struct spi_dw_data *spi, |
| const struct spi_config *config) |
| { |
| const struct spi_dw_config *info = dev->config; |
| uint32_t ctrlr0 = 0U; |
| |
| LOG_DBG("%p (prev %p)", config, spi->ctx.config); |
| |
| if (spi_context_configured(&spi->ctx, config)) { |
| /* Nothing to do */ |
| return 0; |
| } |
| |
| if (config->operation & SPI_HALF_DUPLEX) { |
| LOG_ERR("Half-duplex not supported"); |
| return -ENOTSUP; |
| } |
| |
| /* Verify if requested op mode is relevant to this controller */ |
| if (config->operation & SPI_OP_MODE_SLAVE) { |
| if (!(info->serial_target)) { |
| LOG_ERR("Slave mode not supported"); |
| return -ENOTSUP; |
| } |
| } else { |
| if (info->serial_target) { |
| LOG_ERR("Master mode not supported"); |
| return -ENOTSUP; |
| } |
| } |
| |
| if ((config->operation & SPI_TRANSFER_LSB) || |
| (IS_ENABLED(CONFIG_SPI_EXTENDED_MODES) && |
| (config->operation & (SPI_LINES_DUAL | |
| SPI_LINES_QUAD | SPI_LINES_OCTAL)))) { |
| LOG_ERR("Unsupported configuration"); |
| return -EINVAL; |
| } |
| |
| if (info->max_xfer_size < SPI_WORD_SIZE_GET(config->operation)) { |
| LOG_ERR("Max xfer size is %u, word size of %u not allowed", |
| info->max_xfer_size, SPI_WORD_SIZE_GET(config->operation)); |
| return -ENOTSUP; |
| } |
| |
| /* Word size */ |
| if (info->max_xfer_size == 32) { |
| ctrlr0 |= DW_SPI_CTRLR0_DFS_32(SPI_WORD_SIZE_GET(config->operation)); |
| } else { |
| ctrlr0 |= DW_SPI_CTRLR0_DFS_16(SPI_WORD_SIZE_GET(config->operation)); |
| } |
| |
| /* Determine how many bytes are required per-frame */ |
| spi->dfs = SPI_WS_TO_DFS(SPI_WORD_SIZE_GET(config->operation)); |
| |
| /* SPI mode */ |
| if (SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) { |
| ctrlr0 |= DW_SPI_CTRLR0_SCPOL; |
| } |
| |
| if (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) { |
| ctrlr0 |= DW_SPI_CTRLR0_SCPH; |
| } |
| |
| if (SPI_MODE_GET(config->operation) & SPI_MODE_LOOP) { |
| ctrlr0 |= DW_SPI_CTRLR0_SRL; |
| } |
| |
| /* Installing the configuration */ |
| write_ctrlr0(dev, ctrlr0); |
| |
| /* At this point, it's mandatory to set this on the context! */ |
| spi->ctx.config = config; |
| |
| if (!spi_dw_is_slave(spi)) { |
| /* Baud rate and Slave select, for master only */ |
| write_baudr(dev, SPI_DW_CLK_DIVIDER(info->clock_frequency, |
| config->frequency)); |
| } |
| |
| if (spi_dw_is_slave(spi)) { |
| LOG_DBG("Installed slave config %p:" |
| " ws/dfs %u/%u, mode %u/%u/%u", |
| config, |
| SPI_WORD_SIZE_GET(config->operation), spi->dfs, |
| (SPI_MODE_GET(config->operation) & |
| SPI_MODE_CPOL) ? 1 : 0, |
| (SPI_MODE_GET(config->operation) & |
| SPI_MODE_CPHA) ? 1 : 0, |
| (SPI_MODE_GET(config->operation) & |
| SPI_MODE_LOOP) ? 1 : 0); |
| } else { |
| LOG_DBG("Installed master config %p: freq %uHz (div = %u)," |
| " ws/dfs %u/%u, mode %u/%u/%u, slave %u", |
| config, config->frequency, |
| SPI_DW_CLK_DIVIDER(info->clock_frequency, |
| config->frequency), |
| SPI_WORD_SIZE_GET(config->operation), spi->dfs, |
| (SPI_MODE_GET(config->operation) & |
| SPI_MODE_CPOL) ? 1 : 0, |
| (SPI_MODE_GET(config->operation) & |
| SPI_MODE_CPHA) ? 1 : 0, |
| (SPI_MODE_GET(config->operation) & |
| SPI_MODE_LOOP) ? 1 : 0, |
| config->slave); |
| } |
| |
| return 0; |
| } |
| |
| static uint32_t spi_dw_compute_ndf(const struct spi_buf *rx_bufs, |
| size_t rx_count, uint8_t dfs) |
| { |
| uint32_t len = 0U; |
| |
| for (; rx_count; rx_bufs++, rx_count--) { |
| if (len > (UINT16_MAX - rx_bufs->len)) { |
| goto error; |
| } |
| |
| len += rx_bufs->len; |
| } |
| |
| if (len) { |
| return (len / dfs) - 1; |
| } |
| error: |
| return UINT32_MAX; |
| } |
| |
| static void spi_dw_update_txftlr(const struct device *dev, |
| struct spi_dw_data *spi) |
| { |
| const struct spi_dw_config *info = dev->config; |
| uint32_t dw_spi_txftlr_dflt = (info->fifo_depth * 1) / 2; |
| uint32_t reg_data = dw_spi_txftlr_dflt; |
| |
| if (spi_dw_is_slave(spi)) { |
| if (!spi->ctx.tx_len) { |
| reg_data = 0U; |
| } else if (spi->ctx.tx_len < dw_spi_txftlr_dflt) { |
| reg_data = spi->ctx.tx_len - 1; |
| } |
| } |
| |
| LOG_DBG("TxFTLR: %u", reg_data); |
| |
| write_txftlr(dev, reg_data); |
| } |
| |
| static int transceive(const struct device *dev, |
| const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| bool asynchronous, |
| spi_callback_t cb, |
| void *userdata) |
| { |
| const struct spi_dw_config *info = dev->config; |
| struct spi_dw_data *spi = dev->data; |
| uint32_t tmod = DW_SPI_CTRLR0_TMOD_TX_RX; |
| uint32_t dw_spi_rxftlr_dflt = (info->fifo_depth * 5) / 8; |
| uint32_t reg_data; |
| int ret; |
| |
| spi_context_lock(&spi->ctx, asynchronous, cb, userdata, config); |
| |
| #ifdef CONFIG_PM_DEVICE |
| if (!pm_device_is_busy(dev)) { |
| pm_device_busy_set(dev); |
| } |
| #endif /* CONFIG_PM_DEVICE */ |
| |
| /* Configure */ |
| ret = spi_dw_configure(dev, spi, config); |
| if (ret) { |
| goto out; |
| } |
| |
| if (!rx_bufs || !rx_bufs->buffers) { |
| tmod = DW_SPI_CTRLR0_TMOD_TX; |
| } else if (!tx_bufs || !tx_bufs->buffers) { |
| tmod = DW_SPI_CTRLR0_TMOD_RX; |
| } |
| |
| /* ToDo: add a way to determine EEPROM mode */ |
| |
| if (tmod >= DW_SPI_CTRLR0_TMOD_RX && |
| !spi_dw_is_slave(spi)) { |
| reg_data = spi_dw_compute_ndf(rx_bufs->buffers, |
| rx_bufs->count, |
| spi->dfs); |
| if (reg_data == UINT32_MAX) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| write_ctrlr1(dev, reg_data); |
| } else { |
| write_ctrlr1(dev, 0); |
| } |
| |
| if (spi_dw_is_slave(spi)) { |
| /* Enabling MISO line relevantly */ |
| if (tmod == DW_SPI_CTRLR0_TMOD_RX) { |
| tmod |= DW_SPI_CTRLR0_SLV_OE; |
| } else { |
| tmod &= ~DW_SPI_CTRLR0_SLV_OE; |
| } |
| } |
| |
| /* Updating TMOD in CTRLR0 register */ |
| reg_data = read_ctrlr0(dev); |
| reg_data &= ~DW_SPI_CTRLR0_TMOD_RESET; |
| reg_data |= tmod; |
| |
| write_ctrlr0(dev, reg_data); |
| |
| /* Set buffers info */ |
| spi_context_buffers_setup(&spi->ctx, tx_bufs, rx_bufs, spi->dfs); |
| |
| spi->fifo_diff = 0U; |
| |
| /* Tx Threshold */ |
| spi_dw_update_txftlr(dev, spi); |
| |
| /* Does Rx thresholds needs to be lower? */ |
| reg_data = dw_spi_rxftlr_dflt; |
| |
| if (spi_dw_is_slave(spi)) { |
| if (spi->ctx.rx_len && |
| spi->ctx.rx_len < dw_spi_rxftlr_dflt) { |
| reg_data = spi->ctx.rx_len - 1; |
| } |
| } else { |
| if (spi->ctx.rx_len && spi->ctx.rx_len < info->fifo_depth) { |
| reg_data = spi->ctx.rx_len - 1; |
| } |
| } |
| |
| /* Rx Threshold */ |
| write_rxftlr(dev, reg_data); |
| |
| /* Enable interrupts */ |
| reg_data = !rx_bufs ? |
| DW_SPI_IMR_UNMASK & DW_SPI_IMR_MASK_RX : |
| DW_SPI_IMR_UNMASK; |
| write_imr(dev, reg_data); |
| |
| if (!spi_dw_is_slave(spi)) { |
| /* if cs is not defined as gpio, use hw cs */ |
| if (spi_cs_is_gpio(config)) { |
| spi_context_cs_control(&spi->ctx, true); |
| } else { |
| write_ser(dev, BIT(config->slave)); |
| } |
| } |
| |
| LOG_DBG("Enabling controller"); |
| set_bit_ssienr(dev); |
| |
| ret = spi_context_wait_for_completion(&spi->ctx); |
| |
| #ifdef CONFIG_SPI_SLAVE |
| if (spi_context_is_slave(&spi->ctx) && !ret) { |
| ret = spi->ctx.recv_frames; |
| } |
| #endif /* CONFIG_SPI_SLAVE */ |
| |
| out: |
| spi_context_release(&spi->ctx, ret); |
| |
| pm_device_busy_clear(dev); |
| |
| return ret; |
| } |
| |
| static int spi_dw_transceive(const struct device *dev, |
| const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs) |
| { |
| LOG_DBG("%p, %p, %p", dev, tx_bufs, rx_bufs); |
| |
| return transceive(dev, config, tx_bufs, rx_bufs, false, NULL, NULL); |
| } |
| |
| #ifdef CONFIG_SPI_ASYNC |
| static int spi_dw_transceive_async(const struct device *dev, |
| const struct spi_config *config, |
| const struct spi_buf_set *tx_bufs, |
| const struct spi_buf_set *rx_bufs, |
| spi_callback_t cb, |
| void *userdata) |
| { |
| LOG_DBG("%p, %p, %p, %p, %p", dev, tx_bufs, rx_bufs, cb, userdata); |
| |
| return transceive(dev, config, tx_bufs, rx_bufs, true, cb, userdata); |
| } |
| #endif /* CONFIG_SPI_ASYNC */ |
| |
| static int spi_dw_release(const struct device *dev, |
| const struct spi_config *config) |
| { |
| struct spi_dw_data *spi = dev->data; |
| |
| if (!spi_context_configured(&spi->ctx, config)) { |
| return -EINVAL; |
| } |
| |
| spi_context_unlock_unconditionally(&spi->ctx); |
| |
| return 0; |
| } |
| |
| void spi_dw_isr(const struct device *dev) |
| { |
| uint32_t int_status; |
| int error; |
| |
| int_status = read_isr(dev); |
| |
| LOG_DBG("SPI %p int_status 0x%x - (tx: %d, rx: %d)", dev, int_status, |
| read_txflr(dev), read_rxflr(dev)); |
| |
| if (int_status & DW_SPI_ISR_ERRORS_MASK) { |
| error = -EIO; |
| goto out; |
| } |
| |
| error = 0; |
| |
| if (int_status & DW_SPI_ISR_RXFIS) { |
| pull_data(dev); |
| } |
| |
| if (int_status & DW_SPI_ISR_TXEIS) { |
| push_data(dev); |
| } |
| |
| out: |
| clear_interrupts(dev); |
| completed(dev, error); |
| } |
| |
| static const struct spi_driver_api dw_spi_api = { |
| .transceive = spi_dw_transceive, |
| #ifdef CONFIG_SPI_ASYNC |
| .transceive_async = spi_dw_transceive_async, |
| #endif /* CONFIG_SPI_ASYNC */ |
| #ifdef CONFIG_SPI_RTIO |
| .iodev_submit = spi_rtio_iodev_default_submit, |
| #endif |
| .release = spi_dw_release, |
| }; |
| |
| int spi_dw_init(const struct device *dev) |
| { |
| int err; |
| const struct spi_dw_config *info = dev->config; |
| struct spi_dw_data *spi = dev->data; |
| |
| #ifdef CONFIG_PINCTRL |
| pinctrl_apply_state(info->pcfg, PINCTRL_STATE_DEFAULT); |
| #endif |
| |
| DEVICE_MMIO_MAP(dev, K_MEM_CACHE_NONE); |
| |
| info->config_func(); |
| |
| /* Masking interrupt and making sure controller is disabled */ |
| write_imr(dev, DW_SPI_IMR_MASK); |
| clear_bit_ssienr(dev); |
| |
| LOG_DBG("Designware SPI driver initialized on device: %p", dev); |
| |
| err = spi_context_cs_configure_all(&spi->ctx); |
| if (err < 0) { |
| return err; |
| } |
| |
| spi_context_unlock_unconditionally(&spi->ctx); |
| |
| return 0; |
| } |
| |
| #define SPI_CFG_IRQS_SINGLE_ERR_LINE(inst) \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, rx_avail, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, rx_avail, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, tx_req, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, tx_req, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, err_int, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, err_int, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, rx_avail, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, tx_req, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, err_int, irq)); |
| |
| #define SPI_CFG_IRQS_MULTIPLE_ERR_LINES(inst) \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, rx_avail, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, rx_avail, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, tx_req, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, tx_req, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, txo_err, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, txo_err, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, rxo_err, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, rxo_err, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, rxu_err, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, rxu_err, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| IRQ_CONNECT(DT_INST_IRQ_BY_NAME(inst, mst_err, irq), \ |
| DT_INST_IRQ_BY_NAME(inst, mst_err, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, rx_avail, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, tx_req, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, txo_err, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, rxo_err, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, rxu_err, irq)); \ |
| irq_enable(DT_INST_IRQ_BY_NAME(inst, mst_err, irq)); |
| |
| #define SPI_DW_IRQ_HANDLER(inst) \ |
| void spi_dw_irq_config_##inst(void) \ |
| { \ |
| COND_CODE_1(IS_EQ(DT_NUM_IRQS(DT_DRV_INST(inst)), 1), \ |
| (IRQ_CONNECT(DT_INST_IRQN(inst), \ |
| DT_INST_IRQ(inst, priority), \ |
| spi_dw_isr, DEVICE_DT_INST_GET(inst), \ |
| 0); \ |
| irq_enable(DT_INST_IRQN(inst));), \ |
| (COND_CODE_1(IS_EQ(DT_NUM_IRQS(DT_DRV_INST(inst)), 3), \ |
| (SPI_CFG_IRQS_SINGLE_ERR_LINE(inst)), \ |
| (SPI_CFG_IRQS_MULTIPLE_ERR_LINES(inst))))) \ |
| } |
| |
| #define SPI_DW_INIT(inst) \ |
| IF_ENABLED(CONFIG_PINCTRL, (PINCTRL_DT_INST_DEFINE(inst);)) \ |
| SPI_DW_IRQ_HANDLER(inst); \ |
| static struct spi_dw_data spi_dw_data_##inst = { \ |
| SPI_CONTEXT_INIT_LOCK(spi_dw_data_##inst, ctx), \ |
| SPI_CONTEXT_INIT_SYNC(spi_dw_data_##inst, ctx), \ |
| SPI_CONTEXT_CS_GPIOS_INITIALIZE(DT_DRV_INST(inst), ctx) \ |
| }; \ |
| static const struct spi_dw_config spi_dw_config_##inst = { \ |
| DEVICE_MMIO_ROM_INIT(DT_DRV_INST(inst)), \ |
| .clock_frequency = COND_CODE_1( \ |
| DT_NODE_HAS_PROP(DT_INST_PHANDLE(inst, clocks), clock_frequency), \ |
| (DT_INST_PROP_BY_PHANDLE(inst, clocks, clock_frequency)), \ |
| (DT_INST_PROP(inst, clock_frequency))), \ |
| .config_func = spi_dw_irq_config_##inst, \ |
| .serial_target = DT_INST_PROP(inst, serial_target), \ |
| .fifo_depth = DT_INST_PROP(inst, fifo_depth), \ |
| .max_xfer_size = DT_INST_PROP(inst, max_xfer_size), \ |
| IF_ENABLED(CONFIG_PINCTRL, (.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(inst),)) \ |
| COND_CODE_1(DT_INST_PROP(inst, aux_reg), \ |
| (.read_func = aux_reg_read, \ |
| .write_func = aux_reg_write, \ |
| .set_bit_func = aux_reg_set_bit, \ |
| .clear_bit_func = aux_reg_clear_bit, \ |
| .test_bit_func = aux_reg_test_bit,), \ |
| (.read_func = reg_read, \ |
| .write_func = reg_write, \ |
| .set_bit_func = reg_set_bit, \ |
| .clear_bit_func = reg_clear_bit, \ |
| .test_bit_func = reg_test_bit,)) \ |
| }; \ |
| DEVICE_DT_INST_DEFINE(inst, \ |
| spi_dw_init, \ |
| NULL, \ |
| &spi_dw_data_##inst, \ |
| &spi_dw_config_##inst, \ |
| POST_KERNEL, \ |
| CONFIG_SPI_INIT_PRIORITY, \ |
| &dw_spi_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(SPI_DW_INIT) |
