| /* |
| * Copyright (c) 2022 Thomas Stranger |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT maxim_ds2485 |
| |
| /** |
| * @brief Driver for the Analog Devices DS2485 1-Wire Master |
| */ |
| |
| #include "w1_ds2477_85_common.h" |
| |
| #include <zephyr/drivers/i2c.h> |
| #include <zephyr/drivers/w1.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/logging/log.h> |
| |
| LOG_MODULE_REGISTER(w1_ds2485, CONFIG_W1_LOG_LEVEL); |
| |
| /* upper limits; guaranteed over operating temperature range */ |
| #define DS2485_T_OSCWUP_us 1000U |
| #define DS2485_T_OP_us 400U |
| #define DS2485_T_SEQ_us 10U |
| |
| int ds2485_w1_script_cmd(const struct device *dev, int w1_delay_us, uint8_t w1_cmd, |
| const uint8_t *tx_buf, const uint8_t tx_len, |
| uint8_t *rx_buf, uint8_t rx_len) |
| { |
| const struct w1_ds2477_85_config *cfg = dev->config; |
| uint8_t i2c_len = 3 + tx_len; |
| uint8_t tx_bytes[3 + SCRIPT_WR_LEN] = { |
| CMD_W1_SCRIPT, tx_len + CMD_W1_SCRIPT_LEN, w1_cmd |
| }; |
| uint8_t rx_bytes[3]; |
| struct i2c_msg rx_msg[2] = { |
| { |
| .buf = rx_bytes, |
| .len = (CMD_W1_SCRIPT_LEN + CMD_OVERHEAD_LEN), |
| .flags = I2C_MSG_READ, |
| }, |
| { |
| .buf = rx_buf, |
| .len = rx_len, |
| .flags = (I2C_MSG_READ | I2C_MSG_STOP), |
| }, |
| }; |
| int ret; |
| |
| __ASSERT_NO_MSG(tx_len <= SCRIPT_WR_LEN); |
| memcpy(&tx_bytes[3], tx_buf, tx_len); |
| ret = i2c_write_dt(&cfg->i2c_spec, tx_bytes, i2c_len); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| k_usleep(DS2485_T_OP_us + DS2485_T_SEQ_us + w1_delay_us); |
| |
| ret = i2c_transfer_dt(&cfg->i2c_spec, rx_msg, 2); |
| if (ret < 0) { |
| LOG_ERR("scripts_cmd fail: ret: %x", ret); |
| return ret; |
| } |
| |
| if ((rx_bytes[0] != (rx_len + 2)) || (rx_bytes[2] != w1_cmd)) { |
| LOG_ERR("scripts_cmd fail: response: %x,%x:", |
| rx_bytes[0], rx_bytes[2]); |
| return -EIO; |
| } |
| |
| return rx_bytes[1]; |
| } |
| |
| static int w1_ds2485_init(const struct device *dev) |
| { |
| const struct w1_ds2477_85_config *cfg = dev->config; |
| |
| if (!device_is_ready(cfg->i2c_spec.bus)) { |
| LOG_ERR("%s is not ready", cfg->i2c_spec.bus->name); |
| return -ENODEV; |
| } |
| |
| if (ds2477_85_reset_master(dev)) { |
| return -EIO; |
| } |
| k_usleep(DS2485_T_OSCWUP_us); |
| |
| return w1_ds2477_85_init(dev); |
| } |
| |
| static const struct w1_driver_api w1_ds2485_driver_api = { |
| .reset_bus = ds2477_85_reset_bus, |
| .read_bit = ds2477_85_read_bit, |
| .write_bit = ds2477_85_write_bit, |
| .read_byte = ds2477_85_read_byte, |
| .write_byte = ds2477_85_write_byte, |
| .read_block = ds2477_85_read_block, |
| .write_block = ds2477_85_write_block, |
| .configure = ds2477_85_configure, |
| }; |
| |
| #define W1_DS2485_INIT(inst) \ |
| static const struct w1_ds2477_85_config w1_ds2477_85_cfg_##inst = \ |
| W1_DS2477_85_DT_CONFIG_INST_GET(inst, DS2485_T_OP_us, \ |
| DS2485_T_SEQ_us, \ |
| ds2485_w1_script_cmd); \ |
| \ |
| static struct w1_ds2477_85_data w1_ds2477_85_data_##inst = {}; \ |
| DEVICE_DT_INST_DEFINE(inst, &w1_ds2485_init, NULL, \ |
| &w1_ds2477_85_data_##inst, \ |
| &w1_ds2477_85_cfg_##inst, POST_KERNEL, \ |
| CONFIG_W1_INIT_PRIORITY, &w1_ds2485_driver_api); |
| |
| DT_INST_FOREACH_STATUS_OKAY(W1_DS2485_INIT) |