soc/renesas/rzt2m/soc.c

/*
 * Copyright (c) 2023 Antmicro <www.antmicro.com>
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <zephyr/init.h>
#include <stdint.h>
#include <zephyr/drivers/syscon.h>
#include "soc.h"
#include <zephyr/sys/util_macro.h>

static const struct device *const prcrn_dev = DEVICE_DT_GET(DT_NODELABEL(prcrn));
static const struct device *const prcrs_dev = DEVICE_DT_GET(DT_NODELABEL(prcrs));
static const struct device *const sckcr_dev = DEVICE_DT_GET(DT_NODELABEL(sckcr));
static const struct device *const sckcr2_dev = DEVICE_DT_GET(DT_NODELABEL(sckcr2));

void rzt2m_unlock_prcrn(uint32_t mask)
{
	uint32_t prcrn;

	syscon_read_reg(prcrn_dev, 0, &prcrn);
	prcrn |= PRC_KEY_CODE | mask;

	syscon_write_reg(prcrn_dev, 0, prcrn);
}

void rzt2m_lock_prcrn(uint32_t mask)
{
	uint32_t prcrn;

	syscon_read_reg(prcrn_dev, 0, &prcrn);
	prcrn &= ~mask;
	prcrn |= PRC_KEY_CODE;

	syscon_write_reg(prcrn_dev, 0, prcrn);
}

void rzt2m_unlock_prcrs(uint32_t mask)
{
	uint32_t prcrs;

	syscon_read_reg(prcrs_dev, 0, &prcrs);
	prcrs |= PRC_KEY_CODE | mask;

	syscon_write_reg(prcrs_dev, 0, prcrs);
}

void rzt2m_lock_prcrs(uint32_t mask)
{
	uint32_t prcrs;

	syscon_read_reg(prcrs_dev, 0, &prcrs);
	prcrs &= ~mask;
	prcrs |= PRC_KEY_CODE;

	syscon_write_reg(prcrs_dev, 0, prcrs);
}

void rzt2m_set_sckcr2(uint32_t mask)
{
	syscon_write_reg(sckcr2_dev, 0, mask);
}

uint32_t rzt2m_get_sckcr2(void)
{
	uint32_t reg;

	syscon_read_reg(sckcr2_dev, 0, &reg);
	return reg;
}

void rzt2m_set_sckcr(uint32_t mask)
{
	syscon_write_reg(sckcr_dev, 0, mask);
}

uint32_t rzt2m_get_sckcr(void)
{
	uint32_t reg;

	syscon_read_reg(sckcr_dev, 0, &reg);
	return reg;
}

void rzt2m_enable_counters(void)
{
	const struct device *const dev = DEVICE_DT_GET(DT_NODELABEL(gsc));

	syscon_write_reg(dev, 0, CNTCR_EN);
}

void soc_early_init_hook(void)
{
	/* Unlock the Protect Registers
	 * so that device drivers can access configuration registers of peripherals.
	 */
	/* After the device drivers are done, lock the Protect Registers. */
	rzt2m_unlock_prcrs(PRCRS_GPIO | PRCRS_CLK);
	rzt2m_unlock_prcrn(PRCRN_PRC1 | PRCRN_PRC2 | PRCRN_PRC0);

	/* Reset the System Clock Control Registers to default values */
	rzt2m_set_sckcr(
		CLMASEL |
		PHYSEL |
		FSELCANFD |
		FSELXSPI0_DEFAULT |
		FSELXSPI1_DEFAULT |
		CKIO_DEFAULT
	);

	rzt2m_set_sckcr2(FSELCPU0_DEFAULT | FSELCPU1_DEFAULT);

	rzt2m_lock_prcrs(PRCRS_GPIO | PRCRS_CLK);
	rzt2m_lock_prcrn(PRCRN_PRC1 | PRCRN_PRC2 | PRCRN_PRC0);

	rzt2m_enable_counters();
}