blob: f9316f56b9dad0d355bd6fb00badedb86f8ff819 [file] [log] [blame]
/*
* Copyright (c) 2018 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f4/stm32f412cg.dtsi>
/ {
model = "Tocoding Argonkey 96boards";
compatible = "tocoding,argonkey", "st,stm32f412";
chosen {
zephyr,console = &usart1;
zephyr,shell-uart = &usart1;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
green_led_0: led_0 {
gpios = <&gpioc 13 GPIO_INT_ACTIVE_HIGH>;
label = "USR0 LED";
};
green_led_1: led_1 {
gpios = <&gpiob 2 GPIO_INT_ACTIVE_HIGH>;
label = "USR1 LED";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button: button {
label = "User";
gpios = <&gpioa 2 GPIO_INT_ACTIVE_LOW>;
};
};
aliases {
led0 = &green_led_0;
led1 = &green_led_1;
sw0 = &user_button;
};
};
&usart1 {
current-speed = <115200>;
pinctrl-0 = <&usart1_pins_b>;
pinctrl-names = "default";
status = "ok";
};
&spi1 {
status = "ok";
};
&spi2 {
status = "ok";
/* ST Microelectronics LSM6DSL accel/gyro sensor */
lsm6dsl@1 {
compatible = "st,lsm6dsl";
reg = <1>;
spi-max-frequency = <1000000>;
irq-gpios = <&gpiob 1 0>;
label = "LSM6DSL_SPI";
};
};
&i2s5 {
status = "ok";
mp34dt05@0 {
compatible = "st,mpxxdtyy";
reg = <0>;
label = "MP34DT05";
};
};
&i2c1 {
status = "ok";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
status = "ok";
clock-frequency = <I2C_BITRATE_FAST>;
hts221@5f {
compatible = "st,hts221";
reg = <0x5f>;
label = "HTS221";
drdy-gpios = <&gpioa 2 GPIO_INT_ACTIVE_LOW>;
};
lps22hb-press@5d {
compatible = "st,lps22hb-press";
reg = <0x5d>;
label = "LPS22HB";
};
vl53l0x@29 {
compatible = "st,vl53l0x";
reg = <0x29>;
label = "VL53L0X";
};
};
&i2c3 {
status = "ok";
clock-frequency = <I2C_BITRATE_FAST>;
lp3943@60 {
compatible = "ti,lp3943";
reg = <0x60>;
label = "LP3943";
};
};
&rtc {
status = "ok";
};