| /* |
| * Copyright (c) 2018 Diego Sueiro |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <silabs/efr32mg12p332f1024gl125.dtsi> |
| |
| / { |
| model = "Silabs EFR32MG SLTB004A board (aka Thunderboard Sense 2)"; |
| compatible = "silabs,efr32mg_sltb004a", "silabs,efr32mg"; |
| |
| aliases { |
| led0 = &led0; |
| led1 = &led1; |
| sw0 = &button0; |
| sw1 = &button1; |
| }; |
| |
| chosen { |
| zephyr,console = &usart0; |
| zephyr,shell-uart = &usart0; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0: led_0 { |
| gpios = <&gpiod 8 0>; |
| label = "LED 0"; |
| }; |
| led1: led_1 { |
| gpios = <&gpiod 9 0>; |
| label = "LED 1"; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| /* gpio flags need validation */ |
| gpios = <&gpiod 14 GPIO_INT_ACTIVE_LOW>; |
| label = "User Push Button 0"; |
| }; |
| button1: button_1 { |
| /* gpio flags need validation */ |
| gpios = <&gpiod 15 GPIO_INT_ACTIVE_LOW>; |
| label = "User Push Button 1"; |
| }; |
| }; |
| }; |
| |
| &usart0 { |
| current-speed = <115200>; |
| location-rx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(1)>; |
| location-tx = <GECKO_LOCATION(0) GECKO_PORT_A GECKO_PIN(0)>; |
| status = "ok"; |
| }; |
| |
| &leuart0 { |
| current-speed = <9600>; |
| location-rx = <GECKO_LOCATION(27) GECKO_PORT_F GECKO_PIN(4)>; |
| location-tx = <GECKO_LOCATION(27) GECKO_PORT_F GECKO_PIN(3)>; |
| status = "ok"; |
| }; |
| |
| &i2c0 { |
| location-sda = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(10)>; |
| location-scl = <GECKO_LOCATION(15) GECKO_PORT_C GECKO_PIN(11)>; |
| status = "ok"; |
| }; |
| |
| &i2c1 { |
| location-sda = <GECKO_LOCATION(17) GECKO_PORT_C GECKO_PIN(4)>; |
| location-scl = <GECKO_LOCATION(17) GECKO_PORT_C GECKO_PIN(5)>; |
| status = "ok"; |
| }; |
| |
| &gpio { |
| location-swo = <0>; |
| status = "ok"; |
| }; |
