blob: 40a0cffdc43fc7b6a9a2a44bb6ddfca3848635c0 [file] [log] [blame]
/*
* Copyright (c) 2018 Phytec Messtechnik GmbH
* Copyright (c) 2017 Linaro Limited
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nordic/nrf52840_qiaa.dtsi>
/ {
model = "reel board";
compatible = "phytec,reel_board", "nordic,nrf52840-qiaa",
"nordic,nrf52840";
chosen {
zephyr,console = &uart0;
zephyr,shell-uart = &uart0;
zephyr,uart-mcumgr = &uart0;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
zephyr,code-partition = &slot0_partition;
};
leds {
compatible = "gpio-leds";
yellow_led: led_0 {
gpios = <&gpio0 13 0>;
label = "User D13";
};
red_led: led_1 {
gpios = <&gpio0 11 0>;
label = "User D3 red";
};
green_led: led_2 {
gpios = <&gpio0 12 0>;
label = "User D3 green";
};
blue_led: led_3 {
gpios = <&gpio1 9 0>;
label = "User D3 blue";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button: button_0 {
gpios = <&gpio0 7 GPIO_PUD_PULL_UP>;
label = "User Button";
};
};
aliases {
led0 = &yellow_led;
led1 = &red_led;
led2 = &green_led;
led3 = &blue_led;
sw0 = &user_button;
};
};
&gpiote {
status ="ok";
};
&gpio0 {
status ="ok";
};
&gpio1 {
status ="ok";
};
&uart0 {
compatible = "nordic,nrf-uart";
current-speed = <115200>;
status = "ok";
tx-pin = <6>;
rx-pin = <8>;
rts-pin = <5>;
cts-pin = <7>;
};
&i2c0 {
status = "ok";
clock-frequency = <I2C_BITRATE_FAST>;
sda-pin = <26>;
scl-pin = <27>;
mma8652fc@1d {
compatible = "nxp,fxos8700","nxp,mma8652fc";
reg = <0x1d>;
label = "MMA8652FC";
int1-gpios = <&gpio0 24 0>;
int2-gpios = <&gpio0 25 0>;
};
hdc1008@43 {
compatible = "ti,hdc1008","ti,hdc1010";
reg = <0x43>;
label = "HDC1010";
drdy-gpios = <&gpio0 22 GPIO_PUD_PULL_UP>;
};
apds9960@29 {
compatible = "avago,apds9960";
reg = <0x29>;
label = "APDS9960";
int-gpios = <&gpio0 23 0>;
};
};
&spi3 {
status = "ok";
sck-pin = <19>;
mosi-pin = <20>;
miso-pin = <21>;
cs-gpios = <&gpio0 17 0>;
ssd1673fb@0 {
compatible = "solomon,ssd1673fb", "gd,gde0213b1";
label = "SSD1673";
spi-max-frequency = <4000000>;
reg = <0>;
width = <250>;
height = <120>;
pp-width-bits = <8>;
pp-height-bits = <8>;
reset-gpios = <&gpio0 15 0>;
dc-gpios = <&gpio0 16 0>;
busy-gpios = <&gpio0 14 0>;
gdv-a = <0x10>;
gdv-b = <0x0a>;
sdv = <0x19>;
vcom = <0xa8>;
border-waveform = <0x71>;
};
};
&flash0 {
/*
* For more information, see:
* http://docs.zephyrproject.org/latest/guides/dts/index.html#flash-partitions
*/
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
boot_partition: partition@0 {
label = "mcuboot";
reg = <0x000000000 0x0000C000>;
};
slot0_partition: partition@c000 {
label = "image-0";
reg = <0x0000C000 0x000069000>;
};
slot1_partition: partition@75000 {
label = "image-1";
reg = <0x00075000 0x000069000>;
};
scratch_partition: partition@de000 {
label = "image-scratch";
reg = <0x000de000 0x0001e000>;
};
storage_partition: partition@fc000 {
label = "storage";
reg = <0x000fc000 0x00004000>;
};
};
};
&usbd {
compatible = "nordic,nrf-usbd";
status = "ok";
};