| /* |
| * Copyright (c) 2018 Henrik Brix Andersen <henrik@brixandersen.dk> |
| * Copyright (c) 2017 Google LLC. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <soc.h> |
| #include <watchdog.h> |
| |
| #define LOG_LEVEL CONFIG_WDT_LOG_LEVEL |
| #include <logging/log.h> |
| LOG_MODULE_REGISTER(wdt_sam0); |
| |
| #define WDT_REGS ((Wdt *)DT_WDT_SAM0_BASE_ADDRESS) |
| |
| struct wdt_sam0_dev_data { |
| wdt_callback_t cb; |
| bool timeout_valid; |
| }; |
| |
| static struct device DEVICE_NAME_GET(wdt_sam0); |
| |
| static struct wdt_sam0_dev_data wdt_sam0_data = { 0 }; |
| |
| static void wdt_sam0_wait_synchronization(void) |
| { |
| while (WDT_REGS->STATUS.bit.SYNCBUSY) { |
| } |
| } |
| |
| static u32_t wdt_sam0_timeout_to_wdt_period(u32_t timeout_ms) |
| { |
| u32_t next_pow2; |
| u32_t cycles; |
| |
| /* Calculate number of clock cycles @ 1.024 kHz input clock */ |
| cycles = (timeout_ms * 1024) / 1000; |
| |
| /* Minimum wdt period is 8 clock cycles (register value 0) */ |
| if (cycles <= 8) |
| return 0; |
| |
| /* Round up to next pow2 and calculate the register value */ |
| next_pow2 = (1ULL << 32) >> __builtin_clz(cycles - 1); |
| return find_msb_set(next_pow2 >> 4); |
| } |
| |
| static void wdt_sam0_isr(struct device *dev) |
| { |
| struct wdt_sam0_dev_data *data = dev->driver_data; |
| |
| WDT_REGS->INTFLAG.reg = WDT_INTFLAG_EW; |
| if (data->cb != NULL) { |
| data->cb(dev, 0); |
| } |
| } |
| |
| static int wdt_sam0_setup(struct device *dev, u8_t options) |
| { |
| struct wdt_sam0_dev_data *data = dev->driver_data; |
| |
| if (WDT_REGS->CTRL.reg == WDT_CTRL_ENABLE) { |
| LOG_ERR("Watchdog already setup"); |
| return -EBUSY; |
| } |
| |
| if (!data->timeout_valid) { |
| LOG_ERR("No valid timeout installed"); |
| return -EINVAL; |
| } |
| |
| if (options & WDT_OPT_PAUSE_IN_SLEEP) { |
| LOG_ERR("Pause in sleep not supported"); |
| return -ENOTSUP; |
| } |
| |
| if (options & WDT_OPT_PAUSE_HALTED_BY_DBG) { |
| LOG_ERR("Pause when halted by debugger not supported"); |
| return -ENOTSUP; |
| } |
| |
| /* Enable watchdog */ |
| WDT_REGS->CTRL.bit.ENABLE = 1; |
| wdt_sam0_wait_synchronization(); |
| |
| return 0; |
| } |
| |
| static int wdt_sam0_disable(struct device *dev) |
| { |
| if (!WDT_REGS->CTRL.bit.ENABLE) { |
| LOG_ERR("Watchdog not enabled"); |
| return -EFAULT; |
| } |
| |
| WDT_REGS->CTRL.bit.ENABLE = 0; |
| wdt_sam0_wait_synchronization(); |
| |
| return 0; |
| } |
| |
| static int wdt_sam0_install_timeout(struct device *dev, |
| const struct wdt_timeout_cfg *cfg) |
| { |
| struct wdt_sam0_dev_data *data = dev->driver_data; |
| u32_t window, per; |
| |
| /* CONFIG is enable protected, error out if already enabled */ |
| if (WDT_REGS->CTRL.bit.ENABLE) { |
| LOG_ERR("Watchdog already setup"); |
| return -EBUSY; |
| } |
| |
| if (cfg->flags != WDT_FLAG_RESET_SOC) { |
| LOG_ERR("Only SoC reset supported"); |
| return -ENOTSUP; |
| } |
| |
| per = wdt_sam0_timeout_to_wdt_period(cfg->window.max); |
| if (per > WDT_CONFIG_PER_16K_Val) { |
| LOG_ERR("Upper limit timeout out of range"); |
| goto timeout_invalid; |
| } |
| |
| if (cfg->window.min) { |
| /* Window mode */ |
| window = wdt_sam0_timeout_to_wdt_period(cfg->window.min); |
| if (window > WDT_CONFIG_PER_8K_Val) { |
| LOG_ERR("Lower limit timeout out of range"); |
| goto timeout_invalid; |
| } |
| if (per <= window) { |
| /* Ensure we have a window */ |
| per = window + 1; |
| } |
| WDT_REGS->CTRL.bit.WEN = 1; |
| wdt_sam0_wait_synchronization(); |
| } else { |
| /* Normal mode */ |
| if (cfg->callback) { |
| if (per == WDT_CONFIG_PER_8_Val) { |
| /* Ensure we have time for the early warning */ |
| per += 1; |
| } |
| WDT_REGS->EWCTRL.bit.EWOFFSET = per - 1; |
| } |
| window = WDT_CONFIG_PER_8_Val; |
| WDT_REGS->CTRL.bit.WEN = 0; |
| wdt_sam0_wait_synchronization(); |
| } |
| |
| WDT_REGS->CONFIG.reg = WDT_CONFIG_WINDOW(window) | WDT_CONFIG_PER(per); |
| wdt_sam0_wait_synchronization(); |
| |
| /* Only enable IRQ if a callback was provided */ |
| data->cb = cfg->callback; |
| if (data->cb) { |
| WDT_REGS->INTENSET.reg = WDT_INTENSET_EW; |
| } else { |
| WDT_REGS->INTENCLR.reg = WDT_INTENCLR_EW; |
| WDT_REGS->INTFLAG.reg = WDT_INTFLAG_EW; |
| } |
| |
| data->timeout_valid = true; |
| |
| return 0; |
| |
| timeout_invalid: |
| data->timeout_valid = false; |
| data->cb = NULL; |
| |
| return -EINVAL; |
| } |
| |
| static int wdt_sam0_feed(struct device *dev, int channel_id) |
| { |
| struct wdt_sam0_dev_data *data = dev->driver_data; |
| |
| if (!data->timeout_valid) { |
| LOG_ERR("No valid timeout installed"); |
| return -EINVAL; |
| } |
| |
| WDT_REGS->CLEAR.reg = WDT_CLEAR_CLEAR_KEY_Val; |
| |
| return 0; |
| } |
| |
| static const struct wdt_driver_api wdt_sam0_api = { |
| .setup = wdt_sam0_setup, |
| .disable = wdt_sam0_disable, |
| .install_timeout = wdt_sam0_install_timeout, |
| .feed = wdt_sam0_feed, |
| }; |
| |
| static int wdt_sam0_init(struct device *dev) |
| { |
| #ifdef CONFIG_WDT_DISABLE_AT_BOOT |
| /* Ignore any errors */ |
| wdt_sam0_disable(dev); |
| #endif |
| /* Enable APB clock */ |
| PM->APBAMASK.bit.WDT_ = 1; |
| |
| /* Connect to GCLK2 (~1.024 kHz) */ |
| GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_WDT |
| | GCLK_CLKCTRL_GEN_GCLK2 |
| | GCLK_CLKCTRL_CLKEN; |
| |
| IRQ_CONNECT(DT_WDT_SAM0_IRQ, |
| DT_WDT_SAM0_IRQ_PRIORITY, wdt_sam0_isr, |
| DEVICE_GET(wdt_sam0), 0); |
| irq_enable(DT_WDT_SAM0_IRQ); |
| |
| return 0; |
| } |
| |
| static struct wdt_sam0_dev_data wdt_sam0_data; |
| |
| DEVICE_AND_API_INIT(wdt_sam0, DT_WDT_SAM0_LABEL, wdt_sam0_init, |
| &wdt_sam0_data, NULL, PRE_KERNEL_1, |
| CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &wdt_sam0_api); |