dts/riscv32/riscv32-fe310.dtsi

#include <dt-bindings/gpio/gpio.h>

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "SiFive,FE310G-0002-Z0-dev", "fe310-dev", "sifive-dev";
	model = "SiFive,FE310G-0002-Z0";
	cpus {
		#address-cells = <1>;
		#size-cells = <0>;
		cpu@0 {
			clock-frequency = <0>;
			compatible = "sifive,rocket0", "riscv";
			device_type = "cpu";
			i-cache-block-size = <64>;
			i-cache-sets = <128>;
			i-cache-size = <16384>;
			next-level-cache = <&modeselect &maskrom &otp &spi0>;
			reg = <0>;
			riscv,isa = "rv32imac";
			sifive,dtim = <&dtim>;
			sifive,itim = <&itim>;
			status = "okay";
			timebase-frequency = <32768>;
			hlic: interrupt-controller {
				#interrupt-cells = <1>;
				compatible = "riscv,cpu-intc";
				interrupt-controller;
			};
		};
	};
	soc {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "SiFive,FE310G-0002-Z0-soc", "fe310-soc",
			"sifive-soc", "simple-bus";
		ranges;
		aon: aon@10000000 {
			compatible = "sifive,aon0";
			interrupt-parent = <&plic>;
			interrupts = <1 2>;
			reg = <0x10000000 0x1000>;
			reg-names = "control";
		};
		clint: clint@2000000 {
			compatible = "riscv,clint0";
			interrupts-extended = <&hlic 3 &hlic 7>;
			reg = <0x2000000 0x10000>;
			reg-names = "control";
		};
		debug: debug-controller@0 {
			compatible = "sifive,debug-013", "riscv,debug-013";
			interrupts-extended = <&hlic 65535>;
			reg = <0x0 0x1000>;
			reg-names = "control";
		};
		dtim: dtim@80000000 {
			compatible = "sifive,dtim0";
			reg = <0x80000000 0x4000>;
			reg-names = "mem";
		};
		error-device@3000 {
			compatible = "sifive,error0";
			reg = <0x3000 0x1000>;
			reg-names = "mem";
		};
		gpio0: gpio@10012000 {
			compatible = "sifive,gpio0";
			gpio-controller;
			interrupt-parent = <&plic>;
			interrupts = <8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
				26 27 28 29 30 31 32 33 34 35 36 37 38 39>;
			reg = <0x10012000 0x1000>;
			reg-names = "control";
			status = "disabled";
			#gpio-cells = <2>;
		};
		i2c0: i2c@10016000 {
			compatible = "sifive,i2c0";
			interrupt-parent = <&plic>;
			interrupts = <52>;
			reg = <0x10016000 0x1000>;
			reg-names = "control";
			label = "i2c_0";
			status = "disabled";
		};
		plic: interrupt-controller@c000000 {
			#interrupt-cells = <1>;
			compatible = "riscv,plic0";
			interrupt-controller;
			interrupts-extended = <&hlic 11>;
			reg = <0xc000000 0x2000
			       0xc002000 0x1fe000
			       0xc200000 0x2000000>;
			reg-names = "prio", "irq_en", "reg";
			riscv,max-priority = <7>;
			riscv,ndev = <52>;
		};
		itim: itim@8000000 {
			compatible = "sifive,itim0";
			reg = <0x8000000 0x4000>;
			reg-names = "mem";
		};
		otp: otp@10010000 {
			compatible = "sifive,otp0";
			reg = <0x10010000 0x1000 0x20000 0x2000>;
			reg-names = "control", "mem";
		};
		prci: prci@10008000 {
			compatible = "sifive,freedome300prci0";
			reg = <0x10008000 0x1000>;
			reg-names = "control";
		};
		pwm0: pwm@10015000 {
			compatible = "sifive,pwm0";
			interrupt-parent = <&plic>;
			interrupts = <40 41 42 43>;
			reg = <0x10015000 0x1000>;
			reg-names = "control";
			label = "pwm_0";
			status = "disabled";
			sifive,compare-width = <8>;
			#pwm-cells = <2>;
		};
		pwm1: pwm@10025000 {
			compatible = "sifive,pwm0";
			interrupt-parent = <&plic>;
			interrupts = <44 45 46 47>;
			reg = <0x10025000 0x1000>;
			reg-names = "control";
			label = "pwm_1";
			status = "disabled";
			sifive,compare-width = <16>;
			#pwm-cells = <2>;
		};
		pwm2: pwm@10035000 {
			compatible = "sifive,pwm0";
			interrupt-parent = <&plic>;
			interrupts = <48 49 50 51>;
			reg = <0x10035000 0x1000>;
			reg-names = "control";
			label = "pwm_2";
			status = "disabled";
			sifive,compare-width = <16>;
			#pwm-cells = <2>;
		};
		modeselect: rom@1000 {
			compatible = "sifive,modeselect0";
			reg = <0x1000 0x1000>;
			reg-names = "mem";
		};
		maskrom: rom@10000 {
			compatible = "sifive,maskrom0";
			reg = <0x10000 0x2000>;
			reg-names = "mem";
		};
		uart0: serial@10013000 {
			compatible = "sifive,uart0";
			interrupt-parent = <&plic>;
			interrupts = <3>;
			reg = <0x10013000 0x1000>;
			reg-names = "control";
			label = "uart_0";
			status = "disabled";
		};
		uart1: serial@10023000 {
			compatible = "sifive,uart0";
			interrupt-parent = <&plic>;
			interrupts = <4>;
			reg = <0x10023000 0x1000>;
			reg-names = "control";
			status = "disabled";
		};
		spi0: spi@10014000 {
			compatible = "sifive,spi0";
			interrupt-parent = <&plic>;
			interrupts = <5>;
			reg = <0x10014000 0x1000 0x20000000 0x20000000>;
			reg-names = "control", "mem";
			label = "spi_0";
			status = "disabled";
		};
		spi1: spi@10024000 {
			compatible = "sifive,spi0";
			interrupt-parent = <&plic>;
			interrupts = <6>;
			reg = <0x10024000 0x1000>;
			reg-names = "control";
			label = "spi_1";
			status = "disabled";
		};
		spi2: spi@10034000 {
			compatible = "sifive,spi0";
			interrupt-parent = <&plic>;
			interrupts = <7>;
			reg = <0x10034000 0x1000>;
			reg-names = "control";
			label = "spi_2";
			status = "disabled";
		};
		teststatus: teststatus@4000 {
			compatible = "sifive,test0";
			reg = <0x4000 0x1000>;
			reg-names = "control";
		};
	};
};