soc/nxp/imxrt/Kconfig.defconfig

# Copyright 2017-2024 NXP
# SPDX-License-Identifier: Apache-2.0

if SOC_FAMILY_NXP_IMXRT

# Source series Kconfig files first, so SOCs
# can override the defaults given here
rsource "*/Kconfig.defconfig"

if SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX || SOC_SERIES_IMXRT118X

config ROM_START_OFFSET
	default 0x400 if BOOTLOADER_MCUBOOT
	default 0x2000 if BOOT_FLEXSPI_NOR || BOOT_SEMC_NOR

config PINCTRL_IMX
	default y if HAS_MCUX_IOMUXC
	depends on PINCTRL

config ADC_MCUX_12B1MSPS_SAR
	default y if HAS_MCUX_12B1MSPS_SAR
	depends on ADC

config LOG_BACKEND_SWO_FREQ_HZ
	default 7500000
	depends on LOG_BACKEND_SWO

# set the tick per sec as a divider of the GPT clock source
config SYS_CLOCK_TICKS_PER_SEC
	default 4096 if MCUX_GPT_TIMER

DT_SYSCLK_PATH := $(dt_nodelabel_path,sysclk)

config SYS_CLOCK_HW_CYCLES_PER_SEC
	default $(dt_node_int_prop_int,$(DT_SYSCLK_PATH),clock-frequency) if SOC_SERIES_IMXRT10XX && CORTEX_M_SYSTICK
	default 32768 if MCUX_GPT_TIMER

# Disable systick if using MCUX_GPT_TIMER, as they will conflict
config CORTEX_M_SYSTICK
	default n if MCUX_GPT_TIMER

config PM_MCUX_GPC
	default y if HAS_MCUX_GPC
	depends on SOC_SERIES_IMXRT11XX && PM

# Don't allow SOC to sleep after tests complete when PM is enabled
config ZTEST_NO_YIELD
	default y if (ZTEST && PM)

if SOC_SERIES_IMXRT10XX && PM

config CODE_DATA_RELOCATION
	default y

config PM_MCUX_GPC
	default y if HAS_MCUX_GPC

config PM_MCUX_DCDC
	default y if HAS_MCUX_DCDC

config PM_MCUX_PMU
	default y if HAS_MCUX_PMU

endif # SOC_SERIES_IMXRT10XX && PM

if ETH_NXP_ENET || ETH_NXP_IMX_NETC

config SYSTEM_WORKQUEUE_STACK_SIZE
	default 1560

endif # ETH_NXP_ENET

config MEMC
	default y if !SOC_SERIES_IMXRT118X # RT118X lacks FLEXRAM

DT_CHOSEN_Z_DTCM := zephyr,dtcm

choice SEGGER_RTT_SECTION
	default SEGGER_RTT_SECTION_DTCM if $(dt_chosen_enabled,$(DT_CHOSEN_Z_DTCM))
	depends on USE_SEGGER_RTT
endchoice

choice SEGGER_SYSVIEW_SECTION
	default SEGGER_SYSVIEW_SECTION_DTCM if $(dt_chosen_enabled,$(DT_CHOSEN_Z_DTCM))
	depends on SEGGER_SYSTEMVIEW
endchoice

config MBEDTLS
	default y if CSPRNG_ENABLED
	depends on ENTROPY_GENERATOR

if MBEDTLS
#
# MBEDTLS CTR_DRBG code path needs extra stack space for initialization than
# what the ztest_thread_stack defaults to.
#
config TEST_EXTRA_STACK_SIZE
	default 1024
endif # MBEDTLS

if CPU_CORTEX_M7
# defaults specific for the M7 core

# Enable cache management features when using M7 core, since these parts
# have L1 instruction and data caches that should be enabled at boot
config CACHE_MANAGEMENT
	default y

config FLASH_MCUX_FLEXSPI_XIP_MEM
	default "ITCM"

endif # CPU_CORTEX_M7

endif # SOC_SERIES_IMXRT10XX || SOC_SERIES_IMXRT11XX || SOC_SERIES_IMXRT118X

endif # SOC_FAMILY_NXP_IMXRT