| /* |
| * Copyright (c) 2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT ti_tmp007 |
| |
| #include <zephyr/device.h> |
| #include <zephyr/drivers/gpio.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/drivers/sensor.h> |
| |
| #include "tmp007.h" |
| |
| extern struct tmp007_data tmp007_driver; |
| |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_DECLARE(TMP007, CONFIG_SENSOR_LOG_LEVEL); |
| |
| static inline void setup_int(const struct device *dev, |
| bool enable) |
| { |
| struct tmp007_data *data = dev->data; |
| |
| gpio_pin_interrupt_configure(data->gpio, |
| DT_INST_GPIO_PIN(0, int_gpios), |
| enable |
| ? GPIO_INT_LEVEL_ACTIVE |
| : GPIO_INT_DISABLE); |
| } |
| |
| int tmp007_attr_set(const struct device *dev, |
| enum sensor_channel chan, |
| enum sensor_attribute attr, |
| const struct sensor_value *val) |
| { |
| struct tmp007_data *drv_data = dev->data; |
| int64_t value; |
| uint8_t reg; |
| |
| if (chan != SENSOR_CHAN_AMBIENT_TEMP) { |
| return -ENOTSUP; |
| } |
| |
| if (attr == SENSOR_ATTR_UPPER_THRESH) { |
| reg = TMP007_REG_TOBJ_TH_HIGH; |
| } else if (attr == SENSOR_ATTR_LOWER_THRESH) { |
| reg = TMP007_REG_TOBJ_TH_LOW; |
| } else { |
| return -ENOTSUP; |
| } |
| |
| value = (int64_t)val->val1 * 1000000 + val->val2; |
| value = (value / TMP007_TEMP_TH_SCALE) << 6; |
| |
| if (tmp007_reg_write(drv_data, reg, value) < 0) { |
| LOG_DBG("Failed to set attribute!"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static void tmp007_gpio_callback(const struct device *dev, |
| struct gpio_callback *cb, uint32_t pins) |
| { |
| struct tmp007_data *drv_data = |
| CONTAINER_OF(cb, struct tmp007_data, gpio_cb); |
| |
| setup_int(drv_data->dev, false); |
| |
| #if defined(CONFIG_TMP007_TRIGGER_OWN_THREAD) |
| k_sem_give(&drv_data->gpio_sem); |
| #elif defined(CONFIG_TMP007_TRIGGER_GLOBAL_THREAD) |
| k_work_submit(&drv_data->work); |
| #endif |
| } |
| |
| static void tmp007_thread_cb(const struct device *dev) |
| { |
| struct tmp007_data *drv_data = dev->data; |
| uint16_t status; |
| |
| if (tmp007_reg_read(drv_data, TMP007_REG_STATUS, &status) < 0) { |
| return; |
| } |
| |
| if (status & TMP007_DATA_READY_INT_BIT && |
| drv_data->drdy_handler != NULL) { |
| drv_data->drdy_handler(dev, &drv_data->drdy_trigger); |
| } |
| |
| if (status & TMP007_TOBJ_TH_INT_BITS && |
| drv_data->th_handler != NULL) { |
| drv_data->th_handler(dev, &drv_data->th_trigger); |
| } |
| |
| setup_int(dev, true); |
| } |
| |
| #ifdef CONFIG_TMP007_TRIGGER_OWN_THREAD |
| static void tmp007_thread(struct tmp007_data *drv_data) |
| { |
| while (1) { |
| k_sem_take(&drv_data->gpio_sem, K_FOREVER); |
| tmp007_thread_cb(drv_data->dev); |
| } |
| } |
| #endif |
| |
| #ifdef CONFIG_TMP007_TRIGGER_GLOBAL_THREAD |
| static void tmp007_work_cb(struct k_work *work) |
| { |
| struct tmp007_data *drv_data = |
| CONTAINER_OF(work, struct tmp007_data, work); |
| |
| tmp007_thread_cb(drv_data->dev); |
| } |
| #endif |
| |
| int tmp007_trigger_set(const struct device *dev, |
| const struct sensor_trigger *trig, |
| sensor_trigger_handler_t handler) |
| { |
| struct tmp007_data *drv_data = dev->data; |
| |
| setup_int(dev, false); |
| |
| if (trig->type == SENSOR_TRIG_DATA_READY) { |
| drv_data->drdy_handler = handler; |
| drv_data->drdy_trigger = *trig; |
| } else if (trig->type == SENSOR_TRIG_THRESHOLD) { |
| drv_data->th_handler = handler; |
| drv_data->th_trigger = *trig; |
| } |
| |
| setup_int(dev, true); |
| |
| return 0; |
| } |
| |
| int tmp007_init_interrupt(const struct device *dev) |
| { |
| struct tmp007_data *drv_data = dev->data; |
| |
| if (tmp007_reg_update(drv_data, TMP007_REG_CONFIG, |
| TMP007_ALERT_EN_BIT, TMP007_ALERT_EN_BIT) < 0) { |
| LOG_DBG("Failed to enable interrupt pin!"); |
| return -EIO; |
| } |
| |
| drv_data->dev = dev; |
| |
| /* setup gpio interrupt */ |
| drv_data->gpio = device_get_binding(DT_INST_GPIO_LABEL(0, int_gpios)); |
| if (drv_data->gpio == NULL) { |
| LOG_DBG("Failed to get pointer to %s device!", |
| DT_INST_GPIO_LABEL(0, int_gpios)); |
| return -EINVAL; |
| } |
| |
| gpio_pin_configure(drv_data->gpio, DT_INST_GPIO_PIN(0, int_gpios), |
| DT_INST_GPIO_FLAGS(0, int_gpios) |
| | GPIO_INT_LEVEL_ACTIVE); |
| |
| gpio_init_callback(&drv_data->gpio_cb, |
| tmp007_gpio_callback, |
| BIT(DT_INST_GPIO_PIN(0, int_gpios))); |
| |
| if (gpio_add_callback(drv_data->gpio, &drv_data->gpio_cb) < 0) { |
| LOG_DBG("Failed to set gpio callback!"); |
| return -EIO; |
| } |
| |
| #if defined(CONFIG_TMP007_TRIGGER_OWN_THREAD) |
| k_sem_init(&drv_data->gpio_sem, 0, K_SEM_MAX_LIMIT); |
| |
| k_thread_create(&drv_data->thread, drv_data->thread_stack, |
| CONFIG_TMP007_THREAD_STACK_SIZE, |
| (k_thread_entry_t)tmp007_thread, drv_data, |
| NULL, NULL, K_PRIO_COOP(CONFIG_TMP007_THREAD_PRIORITY), |
| 0, K_NO_WAIT); |
| #elif defined(CONFIG_TMP007_TRIGGER_GLOBAL_THREAD) |
| drv_data->work.handler = tmp007_work_cb; |
| #endif |
| |
| return 0; |
| } |