blob: 8bbc0e2b8f247dc136df48fa02d212e3a4a5ed67 [file] [log] [blame]
/*
* Copyright (c) 2023 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f0/stm32f042X6.dtsi>
#include <st/f0/stm32f042k(4-6)tx-pinctrl.dtsi>
/ {
model = "STMicroelectronics STM32F042K6-NUCLEO board";
compatible = "st,stm32f042k6-nucleo";
chosen {
zephyr,console = &usart2;
zephyr,shell-uart = &usart2;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
green_led_3: led_3 {
gpios = <&gpiob 3 GPIO_ACTIVE_HIGH>;
label = "User LD3";
};
};
pwmleds {
compatible = "pwm-leds";
green_pwm_led: green_pwm_led {
pwms = <&pwm3 32 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
};
};
aliases {
led0 = &green_led_3;
pwm-led0 = &green_pwm_led;
volt-sensor0 = &vref;
volt-sensor1 = &vbat;
};
};
&clk_lsi {
status = "okay";
};
&clk_hsi {
status = "okay";
};
&pll {
prediv = <1>;
mul = <6>;
clocks = <&clk_hsi>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(48)>;
ahb-prescaler = <1>;
apb1-prescaler = <1>;
};
&timers3 {
status = "okay";
pwm3: pwm {
status = "okay";
pinctrl-0 = <&tim3_ch3_pb0>;
pinctrl-names = "default";
};
};
&usart2 {
pinctrl-0 = <&usart2_tx_pa2 &usart2_rx_pa15>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
pinctrl-0 = <&spi1_sck_pb3 &spi1_miso_pb4 &spi1_mosi_pb5>;
pinctrl-names = "default";
cs-gpios = <&gpioa 11 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
status = "okay";
};
&adc1 {
pinctrl-0 = <&adc_in0_pa0>;
pinctrl-names = "default";
status = "okay";
};
&rtc {
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>,
<&rcc STM32_SRC_LSI RTC_SEL(2)>;
status = "okay";
};
&vref {
status = "okay";
};
&vbat {
status = "okay";
};