blob: 05b09184df9260a5f7211607f4e4f3434b87546e [file] [log] [blame]
/*
* Copyright (c) 2021 Synopsys
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT snps_creg_gpio
#include <errno.h>
#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <zephyr/init.h>
#include <zephyr/drivers/gpio.h>
#include <zephyr/drivers/i2c.h>
#include <zephyr/sys/byteorder.h>
#include <zephyr/sys/util.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(creg_gpio, CONFIG_GPIO_LOG_LEVEL);
#include <zephyr/drivers/gpio/gpio_utils.h>
/** Runtime driver data */
struct creg_gpio_drv_data {
/* gpio_driver_data needs to be first */
struct gpio_driver_data common;
uint32_t pin_val;
uint32_t base_addr;
};
/** Configuration data */
struct creg_gpio_config {
/* gpio_driver_config needs to be first */
struct gpio_driver_config common;
uint32_t ngpios;
uint8_t bit_per_gpio;
uint8_t off_val;
uint8_t on_val;
};
static int port_get(const struct device *dev,
gpio_port_value_t *value)
{
const struct creg_gpio_config *cfg = dev->config;
struct creg_gpio_drv_data *drv_data = dev->data;
uint32_t in = sys_read32(drv_data->base_addr);
uint32_t tmp = 0;
uint32_t val = 0;
for (uint8_t i = 0; i < cfg->ngpios; i++) {
tmp = (in & cfg->on_val << i * cfg->bit_per_gpio) ? 1 : 0;
val |= tmp << i;
}
*value = drv_data->pin_val = val;
return 0;
}
static int port_write(const struct device *dev,
gpio_port_pins_t mask,
gpio_port_value_t value,
gpio_port_value_t toggle)
{
const struct creg_gpio_config *cfg = dev->config;
struct creg_gpio_drv_data *drv_data = dev->data;
uint32_t *pin_val = &drv_data->pin_val;
uint32_t out = 0;
uint32_t tmp = 0;
*pin_val = ((*pin_val & ~mask) | (value & mask)) ^ toggle;
for (uint8_t i = 0; i < cfg->ngpios; i++) {
tmp = (*pin_val & 1 << i) ? cfg->on_val : cfg->off_val;
out |= tmp << i * cfg->bit_per_gpio;
}
sys_write32(out, drv_data->base_addr);
return 0;
}
static int port_set_masked(const struct device *dev,
gpio_port_pins_t mask,
gpio_port_value_t value)
{
return port_write(dev, mask, value, 0);
}
static int port_set_bits(const struct device *dev,
gpio_port_pins_t pins)
{
return port_write(dev, pins, pins, 0);
}
static int port_clear_bits(const struct device *dev,
gpio_port_pins_t pins)
{
return port_write(dev, pins, 0, 0);
}
static int port_toggle_bits(const struct device *dev,
gpio_port_pins_t pins)
{
return port_write(dev, 0, 0, pins);
}
static int pin_interrupt_configure(const struct device *dev,
gpio_pin_t pin,
enum gpio_int_mode mode,
enum gpio_int_trig trig)
{
return -ENOTSUP;
}
static int pin_config(const struct device *dev,
gpio_pin_t pin,
gpio_flags_t flags)
{
const struct creg_gpio_config *cfg = dev->config;
uint32_t io_flags;
bool pin_is_output;
/* Check for invalid pin number */
if (pin >= cfg->ngpios) {
return -EINVAL;
}
/* Does not support disconnected pin, and
* not supporting both input/output at same time.
*/
io_flags = flags & (GPIO_INPUT | GPIO_OUTPUT);
if ((io_flags == GPIO_DISCONNECTED)
|| (io_flags == (GPIO_INPUT | GPIO_OUTPUT))) {
return -ENOTSUP;
}
/* No open-drain support */
if ((flags & GPIO_SINGLE_ENDED) != 0U) {
return -ENOTSUP;
}
/* Does not support pull-up/pull-down */
if ((flags & (GPIO_PULL_UP | GPIO_PULL_DOWN)) != 0U) {
return -ENOTSUP;
}
pin_is_output = (flags & GPIO_OUTPUT) != 0U;
if (pin_is_output) {
if ((flags & GPIO_OUTPUT_INIT_HIGH) != 0U) {
return port_set_bits(dev, BIT(pin));
} else if ((flags & GPIO_OUTPUT_INIT_LOW) != 0U) {
return port_clear_bits(dev, BIT(pin));
}
}
return -ENOTSUP;
}
static const struct gpio_driver_api api_table = {
.pin_configure = pin_config,
.port_get_raw = port_get,
.port_set_masked_raw = port_set_masked,
.port_set_bits_raw = port_set_bits,
.port_clear_bits_raw = port_clear_bits,
.port_toggle_bits = port_toggle_bits,
.pin_interrupt_configure = pin_interrupt_configure,
};
static const struct creg_gpio_config creg_gpio_cfg = {
.common = {
.port_pin_mask = GPIO_PORT_PIN_MASK_FROM_DT_INST(0),
},
.ngpios = DT_INST_PROP(0, ngpios),
.bit_per_gpio = DT_INST_PROP(0, bit_per_gpio),
.off_val = DT_INST_PROP(0, off_val),
.on_val = DT_INST_PROP(0, on_val),
};
static struct creg_gpio_drv_data creg_gpio_drvdata = {
.base_addr = DT_INST_REG_ADDR(0),
};
DEVICE_DT_INST_DEFINE(0, NULL, NULL, &creg_gpio_drvdata, &creg_gpio_cfg,
POST_KERNEL, CONFIG_GPIO_INIT_PRIORITY,
&api_table);