blob: 7405800b2447f498de85ded285741e10e21af92f [file] [log] [blame]
/*
* Copyright (c) 2019, Linaro
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nxp_imx_pwm
#include <errno.h>
#include <zephyr/drivers/pwm.h>
#include <zephyr/drivers/clock_control.h>
#include <soc.h>
#include <fsl_pwm.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(pwm_mcux, CONFIG_PWM_LOG_LEVEL);
#define CHANNEL_COUNT 2
struct pwm_mcux_config {
PWM_Type *base;
uint8_t index;
const struct device *clock_dev;
clock_control_subsys_t clock_subsys;
pwm_clock_prescale_t prescale;
pwm_register_reload_t reload;
pwm_mode_t mode;
bool run_wait;
bool run_debug;
const struct pinctrl_dev_config *pincfg;
};
struct pwm_mcux_data {
uint32_t period_cycles[CHANNEL_COUNT];
pwm_signal_param_t channel[CHANNEL_COUNT];
};
static int mcux_pwm_set_cycles(const struct device *dev, uint32_t channel,
uint32_t period_cycles, uint32_t pulse_cycles,
pwm_flags_t flags)
{
const struct pwm_mcux_config *config = dev->config;
struct pwm_mcux_data *data = dev->data;
uint8_t duty_cycle;
pwm_level_select_t level;
if (channel >= CHANNEL_COUNT) {
LOG_ERR("Invalid channel");
return -EINVAL;
}
if (period_cycles == 0) {
LOG_ERR("Channel can not be set to inactive level");
return -ENOTSUP;
}
if (period_cycles > UINT16_MAX) {
/* 16-bit resolution */
LOG_ERR("Too long period (%u), adjust pwm prescaler!",
period_cycles);
/* TODO: dynamically adjust prescaler */
return -EINVAL;
}
duty_cycle = 100 * pulse_cycles / period_cycles;
if (flags & PWM_POLARITY_INVERTED) {
level = kPWM_LowTrue;
} else {
level = kPWM_HighTrue;
}
/* FIXME: Force re-setup even for duty-cycle update */
if (period_cycles != data->period_cycles[channel]
|| level != data->channel[channel].level) {
uint32_t clock_freq;
uint32_t pwm_freq;
status_t status;
data->period_cycles[channel] = period_cycles;
LOG_DBG("SETUP dutycycle to %u", duty_cycle);
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
&clock_freq)) {
return -EINVAL;
}
pwm_freq = DIV_ROUND_UP(clock_freq >> config->prescale, period_cycles);
if (pwm_freq == 0) {
LOG_ERR("Could not set up pwm_freq=%d", pwm_freq);
return -EINVAL;
}
data->channel[channel].pwmchannelenable = true;
PWM_StopTimer(config->base, 1U << config->index);
data->channel[channel].dutyCyclePercent = duty_cycle;
data->channel[channel].level = level;
status = PWM_SetupPwm(config->base, config->index,
&data->channel[0], CHANNEL_COUNT,
config->mode, pwm_freq, clock_freq);
if (status != kStatus_Success) {
LOG_ERR("Could not set up pwm");
return -ENOTSUP;
}
PWM_SetPwmLdok(config->base, 1U << config->index, true);
PWM_StartTimer(config->base, 1U << config->index);
} else {
PWM_UpdatePwmDutycycle(config->base, config->index,
(channel == 0) ? kPWM_PwmA : kPWM_PwmB,
config->mode, duty_cycle);
PWM_SetPwmLdok(config->base, 1U << config->index, true);
}
return 0;
}
static int mcux_pwm_get_cycles_per_sec(const struct device *dev,
uint32_t channel, uint64_t *cycles)
{
const struct pwm_mcux_config *config = dev->config;
uint32_t clock_freq;
if (clock_control_get_rate(config->clock_dev, config->clock_subsys,
&clock_freq)) {
return -EINVAL;
}
*cycles = clock_freq >> config->prescale;
return 0;
}
static int pwm_mcux_init(const struct device *dev)
{
const struct pwm_mcux_config *config = dev->config;
struct pwm_mcux_data *data = dev->data;
pwm_config_t pwm_config;
status_t status;
int i, err;
if (!device_is_ready(config->clock_dev)) {
LOG_ERR("clock control device not ready");
return -ENODEV;
}
err = pinctrl_apply_state(config->pincfg, PINCTRL_STATE_DEFAULT);
if (err < 0) {
return err;
}
LOG_DBG("Set prescaler %d, reload mode %d",
1 << config->prescale, config->reload);
PWM_GetDefaultConfig(&pwm_config);
pwm_config.prescale = config->prescale;
pwm_config.reloadLogic = config->reload;
pwm_config.clockSource = kPWM_BusClock;
pwm_config.enableDebugMode = config->run_debug;
pwm_config.enableWait = config->run_wait;
status = PWM_Init(config->base, config->index, &pwm_config);
if (status != kStatus_Success) {
LOG_ERR("Unable to init PWM");
return -EIO;
}
/* Disable fault sources */
for (i = 0; i < FSL_FEATURE_PWM_FAULT_CH_COUNT; i++) {
config->base->SM[config->index].DISMAP[i] = 0x0000;
}
data->channel[0].pwmChannel = kPWM_PwmA;
data->channel[0].level = kPWM_HighTrue;
data->channel[1].pwmChannel = kPWM_PwmB;
data->channel[1].level = kPWM_HighTrue;
return 0;
}
static const struct pwm_driver_api pwm_mcux_driver_api = {
.set_cycles = mcux_pwm_set_cycles,
.get_cycles_per_sec = mcux_pwm_get_cycles_per_sec,
};
#define PWM_DEVICE_INIT_MCUX(n) \
static struct pwm_mcux_data pwm_mcux_data_ ## n; \
PINCTRL_DT_INST_DEFINE(n); \
\
static const struct pwm_mcux_config pwm_mcux_config_ ## n = { \
.base = (PWM_Type *)DT_REG_ADDR(DT_INST_PARENT(n)), \
.index = DT_INST_PROP(n, index), \
.mode = kPWM_EdgeAligned, \
.prescale = _CONCAT(kPWM_Prescale_Divide_, DT_INST_PROP(n, nxp_prescaler)),\
.reload = DT_ENUM_IDX_OR(DT_DRV_INST(n), nxp_reload,\
kPWM_ReloadPwmFullCycle),\
.clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \
.clock_subsys = (clock_control_subsys_t)DT_INST_CLOCKS_CELL(n, name),\
.run_wait = DT_INST_PROP(n, run_in_wait), \
.run_debug = DT_INST_PROP(n, run_in_debug), \
.pincfg = PINCTRL_DT_INST_DEV_CONFIG_GET(n), \
}; \
\
DEVICE_DT_INST_DEFINE(n, \
pwm_mcux_init, \
NULL, \
&pwm_mcux_data_ ## n, \
&pwm_mcux_config_ ## n, \
POST_KERNEL, CONFIG_PWM_INIT_PRIORITY, \
&pwm_mcux_driver_api);
DT_INST_FOREACH_STATUS_OKAY(PWM_DEVICE_INIT_MCUX)