blob: bcbbd246483b0db73d8a0fe054a7c75f41554a31 [file] [log] [blame]
/* usb_dc_kinetis.c - Kinetis USBFSOTG usb device driver */
/*
* Copyright (c) 2017 PHYTEC Messtechnik GmbH
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT nxp_kinetis_usbd
#include <soc.h>
#include <string.h>
#include <stdio.h>
#include <zephyr/kernel.h>
#include <zephyr/sys/byteorder.h>
#include <zephyr/usb/usb_device.h>
#include <zephyr/device.h>
#define LOG_LEVEL CONFIG_USB_DRIVER_LOG_LEVEL
#include <zephyr/logging/log.h>
#include <zephyr/irq.h>
LOG_MODULE_REGISTER(usb_dc_kinetis);
#define NUM_OF_EP_MAX DT_INST_PROP(0, num_bidir_endpoints)
#define BD_OWN_MASK (1 << 5)
#define BD_DATA01_MASK (1 << 4)
#define BD_KEEP_MASK (1 << 3)
#define BD_NINC_MASK (1 << 2)
#define BD_DTS_MASK (1 << 1)
#define BD_STALL_MASK (1 << 0)
#define KINETIS_SETUP_TOKEN 0x0d
#define KINETIS_IN_TOKEN 0x09
#define KINETIS_OUT_TOKEN 0x01
#define USBFSOTG_PERID 0x04
#define USBFSOTG_REV 0x33
#define KINETIS_EP_NUMOF_MASK 0xf
#define KINETIS_ADDR2IDX(addr) ((addr) & (KINETIS_EP_NUMOF_MASK))
/*
* Buffer Descriptor (BD) entry provides endpoint buffer control
* information for USBFS controller. Every endpoint direction requires
* two BD entries.
*/
struct buf_descriptor {
union {
uint32_t bd_fields;
struct {
uint32_t reserved_1_0 : 2;
uint32_t tok_pid : 4;
uint32_t data01 : 1;
uint32_t own : 1;
uint32_t reserved_15_8 : 8;
uint32_t bc : 16;
} get __packed;
struct {
uint32_t reserved_1_0 : 2;
uint32_t bd_ctrl : 6;
uint32_t reserved_15_8 : 8;
uint32_t bc : 16;
} set __packed;
} __packed;
uint32_t buf_addr;
} __packed;
/*
* Buffer Descriptor Table for the endpoints buffer management.
* The driver configuration with 16 fully bidirectional endpoints would require
* four BD entries per endpoint and 512 bytes of memory.
*/
static struct buf_descriptor __aligned(512) bdt[(NUM_OF_EP_MAX) * 2 * 2];
#define BD_IDX_EP0TX_EVEN 2
#define BD_IDX_EP0TX_ODD 3
#define EP_BUF_NUMOF_BLOCKS (NUM_OF_EP_MAX / 2)
K_HEAP_DEFINE(ep_buf_pool, 512 * EP_BUF_NUMOF_BLOCKS + 128);
struct ep_mem_block {
void *data;
};
struct usb_ep_ctrl_data {
struct ep_status {
uint16_t in_enabled : 1;
uint16_t out_enabled : 1;
uint16_t in_data1 : 1;
uint16_t out_data1 : 1;
uint16_t in_odd : 1;
uint16_t out_odd : 1;
uint16_t in_stalled : 1;
uint16_t out_stalled : 1;
} status;
uint16_t mps_in;
uint16_t mps_out;
struct ep_mem_block mblock_in;
struct ep_mem_block mblock_out;
usb_dc_ep_callback cb_in;
usb_dc_ep_callback cb_out;
};
#define USBD_THREAD_STACK_SIZE 1024
struct usb_device_data {
usb_dc_status_callback status_cb;
uint8_t address;
uint32_t bd_active;
struct usb_ep_ctrl_data ep_ctrl[NUM_OF_EP_MAX];
bool attached;
K_KERNEL_STACK_MEMBER(thread_stack, USBD_THREAD_STACK_SIZE);
struct k_thread thread;
};
static struct usb_device_data dev_data;
#define USB_DC_CB_TYPE_MGMT 0
#define USB_DC_CB_TYPE_EP 1
struct cb_msg {
uint8_t ep;
uint8_t type;
uint32_t cb;
};
K_MSGQ_DEFINE(usb_dc_msgq, sizeof(struct cb_msg), 10, 4);
static void usb_kinetis_isr_handler(void);
/*
* This function returns the BD element index based on
* endpoint address and the odd bit.
*/
static inline uint8_t get_bdt_idx(uint8_t ep, uint8_t odd)
{
if (ep & USB_EP_DIR_IN) {
return ((((KINETIS_ADDR2IDX(ep)) * 4) + 2 + (odd & 1)));
}
return ((((KINETIS_ADDR2IDX(ep)) * 4) + (odd & 1)));
}
static int kinetis_usb_init(void)
{
/* enable USB voltage regulator */
SIM->SOPT1 |= SIM_SOPT1_USBREGEN_MASK;
USB0->USBTRC0 |= USB_USBTRC0_USBRESET_MASK;
k_busy_wait(2000);
USB0->CTL = 0;
/* enable USB module, AKA USBEN bit in CTL1 register */
USB0->CTL |= USB_CTL_USBENSOFEN_MASK;
if ((USB0->PERID != USBFSOTG_PERID) ||
(USB0->REV != USBFSOTG_REV)) {
return -1;
}
USB0->BDTPAGE1 = (uint8_t)(((uint32_t)bdt) >> 8);
USB0->BDTPAGE2 = (uint8_t)(((uint32_t)bdt) >> 16);
USB0->BDTPAGE3 = (uint8_t)(((uint32_t)bdt) >> 24);
/* clear interrupt flags */
USB0->ISTAT = 0xFF;
/* enable reset interrupt */
USB0->INTEN = USB_INTEN_USBRSTEN_MASK;
USB0->USBCTRL = USB_USBCTRL_PDE_MASK;
LOG_DBG("");
return 0;
}
int usb_dc_reset(void)
{
for (uint8_t i = 0; i < 16; i++) {
USB0->ENDPOINT[i].ENDPT = 0;
}
(void)memset(bdt, 0, sizeof(bdt));
dev_data.bd_active = 0U;
dev_data.address = 0U;
USB0->CTL |= USB_CTL_ODDRST_MASK;
USB0->CTL &= ~USB_CTL_ODDRST_MASK;
/* Clear interrupt status flags */
USB0->ISTAT = 0xFF;
/* Clear error flags */
USB0->ERRSTAT = 0xFF;
/* Enable all error interrupt sources */
USB0->ERREN = 0xFF;
/* Reset default address */
USB0->ADDR = 0x00;
USB0->INTEN = (USB_INTEN_USBRSTEN_MASK |
USB_INTEN_TOKDNEEN_MASK |
USB_INTEN_SLEEPEN_MASK |
USB_INTEN_SOFTOKEN_MASK |
USB_INTEN_STALLEN_MASK |
USB_INTEN_ERROREN_MASK);
LOG_DBG("");
return 0;
}
int usb_dc_attach(void)
{
if (dev_data.attached) {
LOG_WRN("already attached");
}
kinetis_usb_init();
/*
* Call usb_dc_reset here because the device stack does not make it
* after USB_DC_RESET status event.
*/
usb_dc_reset();
dev_data.attached = 1;
LOG_DBG("attached");
/* non-OTG device mode, enable DP Pullup */
USB0->CONTROL = USB_CONTROL_DPPULLUPNONOTG_MASK;
return 0;
}
int usb_dc_detach(void)
{
LOG_DBG("");
/* disable USB and DP Pullup */
USB0->CTL &= ~USB_CTL_USBENSOFEN_MASK;
USB0->CONTROL &= ~USB_CONTROL_DPPULLUPNONOTG_MASK;
return 0;
}
int usb_dc_set_address(const uint8_t addr)
{
LOG_DBG("");
if (!dev_data.attached) {
return -EINVAL;
}
/*
* The device stack tries to set the address before
* sending the ACK with ZLP, which is totally stupid,
* as workaround the address will be buffered and
* placed later inside isr handler (see KINETIS_IN_TOKEN).
*/
dev_data.address = 0x80 | (addr & 0x7f);
return 0;
}
int usb_dc_ep_check_cap(const struct usb_dc_ep_cfg_data * const cfg)
{
uint8_t ep_idx = USB_EP_GET_IDX(cfg->ep_addr);
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("endpoint index/address out of range");
return -EINVAL;
}
switch (cfg->ep_type) {
case USB_DC_EP_CONTROL:
if (cfg->ep_mps > USB_MAX_CTRL_MPS) {
return -EINVAL;
}
return 0;
case USB_DC_EP_BULK:
if (cfg->ep_mps > USB_MAX_FS_BULK_MPS) {
return -EINVAL;
}
break;
case USB_DC_EP_INTERRUPT:
if (cfg->ep_mps > USB_MAX_FS_INT_MPS) {
return -EINVAL;
}
break;
case USB_DC_EP_ISOCHRONOUS:
if (cfg->ep_mps > USB_MAX_FS_ISO_MPS) {
return -EINVAL;
}
break;
default:
LOG_ERR("Unknown endpoint type!");
return -EINVAL;
}
if (ep_idx & BIT(0)) {
if (USB_EP_GET_DIR(cfg->ep_addr) != USB_EP_DIR_IN) {
LOG_INF("pre-selected as IN endpoint");
return -1;
}
} else {
if (USB_EP_GET_DIR(cfg->ep_addr) != USB_EP_DIR_OUT) {
LOG_INF("pre-selected as OUT endpoint");
return -1;
}
}
return 0;
}
int usb_dc_ep_configure(const struct usb_dc_ep_cfg_data * const cfg)
{
uint8_t ep_idx = USB_EP_GET_IDX(cfg->ep_addr);
struct usb_ep_ctrl_data *ep_ctrl;
struct ep_mem_block *block;
uint8_t idx_even;
uint8_t idx_odd;
if (usb_dc_ep_check_cap(cfg)) {
return -EINVAL;
}
idx_even = get_bdt_idx(cfg->ep_addr, 0);
idx_odd = get_bdt_idx(cfg->ep_addr, 1);
ep_ctrl = &dev_data.ep_ctrl[ep_idx];
if (ep_idx && (dev_data.ep_ctrl[ep_idx].status.in_enabled ||
dev_data.ep_ctrl[ep_idx].status.out_enabled)) {
LOG_WRN("endpoint already configured");
return -EALREADY;
}
LOG_DBG("ep %x, mps %d, type %d", cfg->ep_addr, cfg->ep_mps,
cfg->ep_type);
if (USB_EP_DIR_IS_OUT(cfg->ep_addr)) {
block = &(ep_ctrl->mblock_out);
} else {
block = &(ep_ctrl->mblock_in);
}
if (bdt[idx_even].buf_addr) {
k_heap_free(&ep_buf_pool, block->data);
}
USB0->ENDPOINT[ep_idx].ENDPT = 0;
(void)memset(&bdt[idx_even], 0, sizeof(struct buf_descriptor));
(void)memset(&bdt[idx_odd], 0, sizeof(struct buf_descriptor));
block->data = k_heap_alloc(&ep_buf_pool, cfg->ep_mps * 2U, K_MSEC(10));
if (block->data != NULL) {
(void)memset(block->data, 0, cfg->ep_mps * 2U);
} else {
LOG_ERR("Memory allocation time-out");
return -ENOMEM;
}
bdt[idx_even].buf_addr = (uint32_t)block->data;
LOG_INF("idx_even %x", (uint32_t)block->data);
bdt[idx_odd].buf_addr = (uint32_t)((uint8_t *)block->data + cfg->ep_mps);
LOG_INF("idx_odd %x", (uint32_t)((uint8_t *)block->data + cfg->ep_mps));
if (cfg->ep_addr & USB_EP_DIR_IN) {
dev_data.ep_ctrl[ep_idx].mps_in = cfg->ep_mps;
} else {
dev_data.ep_ctrl[ep_idx].mps_out = cfg->ep_mps;
}
bdt[idx_even].set.bc = cfg->ep_mps;
bdt[idx_odd].set.bc = cfg->ep_mps;
dev_data.ep_ctrl[ep_idx].status.out_data1 = false;
dev_data.ep_ctrl[ep_idx].status.in_data1 = false;
switch (cfg->ep_type) {
case USB_DC_EP_CONTROL:
LOG_DBG("configure control endpoint");
USB0->ENDPOINT[ep_idx].ENDPT |= (USB_ENDPT_EPHSHK_MASK |
USB_ENDPT_EPRXEN_MASK |
USB_ENDPT_EPTXEN_MASK);
break;
case USB_DC_EP_BULK:
case USB_DC_EP_INTERRUPT:
USB0->ENDPOINT[ep_idx].ENDPT |= USB_ENDPT_EPHSHK_MASK;
if (USB_EP_DIR_IS_OUT(cfg->ep_addr)) {
USB0->ENDPOINT[ep_idx].ENDPT |= USB_ENDPT_EPRXEN_MASK;
} else {
USB0->ENDPOINT[ep_idx].ENDPT |= USB_ENDPT_EPTXEN_MASK;
}
break;
case USB_DC_EP_ISOCHRONOUS:
if (USB_EP_DIR_IS_OUT(cfg->ep_addr)) {
USB0->ENDPOINT[ep_idx].ENDPT |= USB_ENDPT_EPRXEN_MASK;
} else {
USB0->ENDPOINT[ep_idx].ENDPT |= USB_ENDPT_EPTXEN_MASK;
}
break;
default:
return -EINVAL;
}
return 0;
}
int usb_dc_ep_set_stall(const uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint8_t bd_idx;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
LOG_DBG("ep %x, idx %d", ep, ep_idx);
if (USB_EP_DIR_IS_OUT(ep)) {
dev_data.ep_ctrl[ep_idx].status.out_stalled = 1U;
bd_idx = get_bdt_idx(ep,
~dev_data.ep_ctrl[ep_idx].status.out_odd);
} else {
dev_data.ep_ctrl[ep_idx].status.in_stalled = 1U;
bd_idx = get_bdt_idx(ep,
dev_data.ep_ctrl[ep_idx].status.in_odd);
}
bdt[bd_idx].set.bd_ctrl = BD_STALL_MASK | BD_DTS_MASK | BD_OWN_MASK;
return 0;
}
int usb_dc_ep_clear_stall(const uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint8_t bd_idx;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
LOG_DBG("ep %x, idx %d", ep, ep_idx);
USB0->ENDPOINT[ep_idx].ENDPT &= ~USB_ENDPT_EPSTALL_MASK;
if (USB_EP_DIR_IS_OUT(ep)) {
dev_data.ep_ctrl[ep_idx].status.out_stalled = 0U;
dev_data.ep_ctrl[ep_idx].status.out_data1 = false;
bd_idx = get_bdt_idx(ep,
~dev_data.ep_ctrl[ep_idx].status.out_odd);
bdt[bd_idx].set.bd_ctrl = 0U;
bdt[bd_idx].set.bd_ctrl = BD_DTS_MASK | BD_OWN_MASK;
} else {
dev_data.ep_ctrl[ep_idx].status.in_stalled = 0U;
dev_data.ep_ctrl[ep_idx].status.in_data1 = false;
bd_idx = get_bdt_idx(ep,
dev_data.ep_ctrl[ep_idx].status.in_odd);
bdt[bd_idx].set.bd_ctrl = 0U;
}
/* Resume TX token processing, see USBx_CTL field descriptions */
if (ep == 0U) {
USB0->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK;
}
return 0;
}
int usb_dc_ep_is_stalled(const uint8_t ep, uint8_t *const stalled)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
LOG_DBG("ep %x, idx %d", ep_idx, ep);
if (!stalled) {
return -EINVAL;
}
*stalled = 0U;
if (USB_EP_DIR_IS_OUT(ep)) {
*stalled = dev_data.ep_ctrl[ep_idx].status.out_stalled;
} else {
*stalled = dev_data.ep_ctrl[ep_idx].status.in_stalled;
}
uint8_t bd_idx = get_bdt_idx(ep,
dev_data.ep_ctrl[ep_idx].status.in_odd);
LOG_WRN("active bd ctrl: %x", bdt[bd_idx].set.bd_ctrl);
bd_idx = get_bdt_idx(ep,
~dev_data.ep_ctrl[ep_idx].status.in_odd);
LOG_WRN("next bd ctrl: %x", bdt[bd_idx].set.bd_ctrl);
return 0;
}
int usb_dc_ep_halt(const uint8_t ep)
{
return usb_dc_ep_set_stall(ep);
}
int usb_dc_ep_enable(const uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint8_t idx_even;
uint8_t idx_odd;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
idx_even = get_bdt_idx(ep, 0);
idx_odd = get_bdt_idx(ep, 1);
if (ep_idx && (dev_data.ep_ctrl[ep_idx].status.in_enabled ||
dev_data.ep_ctrl[ep_idx].status.out_enabled)) {
LOG_WRN("endpoint 0x%x already enabled", ep);
return -EALREADY;
}
if (USB_EP_DIR_IS_OUT(ep)) {
bdt[idx_even].set.bd_ctrl = BD_DTS_MASK | BD_OWN_MASK;
bdt[idx_odd].set.bd_ctrl = 0U;
dev_data.ep_ctrl[ep_idx].status.out_odd = 0U;
dev_data.ep_ctrl[ep_idx].status.out_stalled = 0U;
dev_data.ep_ctrl[ep_idx].status.out_data1 = false;
dev_data.ep_ctrl[ep_idx].status.out_enabled = true;
} else {
bdt[idx_even].bd_fields = 0U;
bdt[idx_odd].bd_fields = 0U;
dev_data.ep_ctrl[ep_idx].status.in_odd = 0U;
dev_data.ep_ctrl[ep_idx].status.in_stalled = 0U;
dev_data.ep_ctrl[ep_idx].status.in_data1 = false;
dev_data.ep_ctrl[ep_idx].status.in_enabled = true;
}
LOG_INF("ep 0x%x, ep_idx %d", ep, ep_idx);
return 0;
}
int usb_dc_ep_disable(const uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint8_t idx_even;
uint8_t idx_odd;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
idx_even = get_bdt_idx(ep, 0);
idx_odd = get_bdt_idx(ep, 1);
LOG_INF("ep %x, idx %d", ep_idx, ep);
bdt[idx_even].bd_fields = 0U;
bdt[idx_odd].bd_fields = 0U;
if (USB_EP_DIR_IS_OUT(ep)) {
dev_data.ep_ctrl[ep_idx].status.out_enabled = false;
} else {
dev_data.ep_ctrl[ep_idx].status.in_enabled = false;
}
return 0;
}
int usb_dc_ep_flush(const uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
LOG_DBG("ep %x, idx %d", ep_idx, ep);
return 0;
}
int usb_dc_ep_write(const uint8_t ep, const uint8_t *const data,
const uint32_t data_len, uint32_t * const ret_bytes)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint32_t len_to_send = data_len;
uint8_t odd;
uint8_t bd_idx;
uint8_t *bufp;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
odd = dev_data.ep_ctrl[ep_idx].status.in_odd;
bd_idx = get_bdt_idx(ep, odd);
bufp = (uint8_t *)bdt[bd_idx].buf_addr;
if (USB_EP_GET_DIR(ep) != USB_EP_DIR_IN) {
LOG_ERR("Wrong endpoint direction");
return -EINVAL;
}
if (dev_data.ep_ctrl[ep_idx].status.in_stalled) {
LOG_WRN("endpoint is stalled");
return -EBUSY;
}
while (bdt[bd_idx].get.own) {
LOG_DBG("ep 0x%x is busy", ep);
k_yield();
}
LOG_DBG("bd idx %x bufp %p odd %d", bd_idx, bufp, odd);
if (data_len > dev_data.ep_ctrl[ep_idx].mps_in) {
len_to_send = dev_data.ep_ctrl[ep_idx].mps_in;
}
bdt[bd_idx].set.bc = len_to_send;
for (uint32_t n = 0; n < len_to_send; n++) {
bufp[n] = data[n];
}
dev_data.ep_ctrl[ep_idx].status.in_odd = ~odd;
if (dev_data.ep_ctrl[ep_idx].status.in_data1) {
bdt[bd_idx].set.bd_ctrl = BD_DTS_MASK |
BD_DATA01_MASK |
BD_OWN_MASK;
} else {
bdt[bd_idx].set.bd_ctrl = BD_DTS_MASK | BD_OWN_MASK;
}
/* Toggle next Data1 */
dev_data.ep_ctrl[ep_idx].status.in_data1 ^= 1;
LOG_DBG("ep 0x%x write %d bytes from %d", ep, len_to_send, data_len);
if (ret_bytes) {
*ret_bytes = len_to_send;
}
return 0;
}
int usb_dc_ep_read_wait(uint8_t ep, uint8_t *data, uint32_t max_data_len,
uint32_t *read_bytes)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint32_t data_len;
uint8_t bd_idx;
uint8_t *bufp;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
/* select the index of active endpoint buffer */
bd_idx = get_bdt_idx(ep, dev_data.ep_ctrl[ep_idx].status.out_odd);
bufp = (uint8_t *)bdt[bd_idx].buf_addr;
if (USB_EP_GET_DIR(ep) != USB_EP_DIR_OUT) {
LOG_ERR("Wrong endpoint direction");
return -EINVAL;
}
if (dev_data.ep_ctrl[ep_idx].status.out_stalled) {
LOG_WRN("endpoint is stalled");
return -EBUSY;
}
/* Allow to read 0 bytes */
if (!data && max_data_len) {
LOG_ERR("Wrong arguments");
return -EINVAL;
}
while (bdt[bd_idx].get.own) {
LOG_ERR("Endpoint is occupied by the controller");
return -EBUSY;
}
data_len = bdt[bd_idx].get.bc;
if (!data && !max_data_len) {
/*
* When both buffer and max data to read are zero return
* the available data in buffer.
*/
if (read_bytes) {
*read_bytes = data_len;
}
return 0;
}
if (data_len > max_data_len) {
LOG_WRN("Not enough room to copy all the data!");
data_len = max_data_len;
}
if (data != NULL) {
for (uint32_t i = 0; i < data_len; i++) {
data[i] = bufp[i];
}
}
LOG_DBG("Read idx %d, req %d, read %d bytes", bd_idx, max_data_len,
data_len);
if (read_bytes) {
*read_bytes = data_len;
}
return 0;
}
int usb_dc_ep_read_continue(uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
uint8_t bd_idx;
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
bd_idx = get_bdt_idx(ep, dev_data.ep_ctrl[ep_idx].status.out_odd);
if (USB_EP_GET_DIR(ep) != USB_EP_DIR_OUT) {
LOG_ERR("Wrong endpoint direction");
return -EINVAL;
}
if (bdt[bd_idx].get.own) {
/* May occur when usb_transfer initializes the OUT transfer */
LOG_WRN("Current buffer is claimed by the controller");
return 0;
}
/* select the index of the next endpoint buffer */
bd_idx = get_bdt_idx(ep, ~dev_data.ep_ctrl[ep_idx].status.out_odd);
/* Update next toggle bit */
dev_data.ep_ctrl[ep_idx].status.out_data1 ^= 1;
bdt[bd_idx].set.bc = dev_data.ep_ctrl[ep_idx].mps_out;
/* Reset next buffer descriptor and set next toggle bit */
if (dev_data.ep_ctrl[ep_idx].status.out_data1) {
bdt[bd_idx].set.bd_ctrl = BD_DTS_MASK |
BD_DATA01_MASK |
BD_OWN_MASK;
} else {
bdt[bd_idx].set.bd_ctrl = BD_DTS_MASK | BD_OWN_MASK;
}
/* Resume TX token processing, see USBx_CTL field descriptions */
if (ep_idx == 0U) {
USB0->CTL &= ~USB_CTL_TXSUSPENDTOKENBUSY_MASK;
}
LOG_DBG("idx next %x", bd_idx);
return 0;
}
int usb_dc_ep_read(const uint8_t ep, uint8_t *const data,
const uint32_t max_data_len, uint32_t *const read_bytes)
{
int retval = usb_dc_ep_read_wait(ep, data, max_data_len, read_bytes);
if (retval) {
return retval;
}
if (!data && !max_data_len) {
/* When both buffer and max data to read are zero the above
* call would fetch the data len and we simply return.
*/
return 0;
}
if (usb_dc_ep_read_continue(ep) != 0) {
return -EINVAL;
}
LOG_DBG("");
return 0;
}
int usb_dc_ep_set_callback(const uint8_t ep, const usb_dc_ep_callback cb)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
if (!dev_data.attached) {
return -EINVAL;
}
if (ep & USB_EP_DIR_IN) {
dev_data.ep_ctrl[ep_idx].cb_in = cb;
} else {
dev_data.ep_ctrl[ep_idx].cb_out = cb;
}
LOG_DBG("ep_idx %x", ep_idx);
return 0;
}
void usb_dc_set_status_callback(const usb_dc_status_callback cb)
{
LOG_DBG("");
dev_data.status_cb = cb;
}
int usb_dc_ep_mps(const uint8_t ep)
{
uint8_t ep_idx = USB_EP_GET_IDX(ep);
if (ep_idx > (NUM_OF_EP_MAX - 1)) {
LOG_ERR("Wrong endpoint index/address");
return -EINVAL;
}
if (ep & USB_EP_DIR_IN) {
return dev_data.ep_ctrl[ep_idx].mps_in;
} else {
return dev_data.ep_ctrl[ep_idx].mps_out;
}
}
static inline void reenable_all_endpoints(void)
{
for (uint8_t ep_idx = 0; ep_idx < NUM_OF_EP_MAX; ep_idx++) {
if (dev_data.ep_ctrl[ep_idx].status.out_enabled) {
usb_dc_ep_enable(ep_idx);
}
if (dev_data.ep_ctrl[ep_idx].status.in_enabled) {
usb_dc_ep_enable(ep_idx | USB_EP_DIR_IN);
}
}
}
static void usb_kinetis_isr_handler(void)
{
uint8_t istatus = USB0->ISTAT;
uint8_t status = USB0->STAT;
struct cb_msg msg;
if (istatus & USB_ISTAT_USBRST_MASK) {
dev_data.address = 0U;
USB0->ADDR = (uint8_t)0;
/*
* Device reset is not possible because the stack does not
* configure the endpoints after the USB_DC_RESET event,
* therefore, reenable all endpoints and set they BDT into a
* defined state.
*/
USB0->CTL |= USB_CTL_ODDRST_MASK;
USB0->CTL &= ~USB_CTL_ODDRST_MASK;
reenable_all_endpoints();
msg.ep = 0U;
msg.type = USB_DC_CB_TYPE_MGMT;
msg.cb = USB_DC_RESET;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
}
if (istatus == USB_ISTAT_ERROR_MASK) {
USB0->ERRSTAT = 0xFF;
msg.ep = 0U;
msg.type = USB_DC_CB_TYPE_MGMT;
msg.cb = USB_DC_ERROR;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
}
if (istatus & USB_ISTAT_STALL_MASK) {
if (dev_data.ep_ctrl[0].status.out_stalled) {
usb_dc_ep_clear_stall(0);
}
if (dev_data.ep_ctrl[0].status.in_stalled) {
usb_dc_ep_clear_stall(0x80);
}
}
if (istatus & USB_ISTAT_TOKDNE_MASK) {
uint8_t ep_idx = status >> USB_STAT_ENDP_SHIFT;
uint8_t ep = ((status << 4) & USB_EP_DIR_IN) | ep_idx;
uint8_t odd = (status & USB_STAT_ODD_MASK) >> USB_STAT_ODD_SHIFT;
uint8_t idx = get_bdt_idx(ep, odd);
uint8_t token_pid = bdt[idx].get.tok_pid;
msg.ep = ep;
msg.type = USB_DC_CB_TYPE_EP;
switch (token_pid) {
case KINETIS_SETUP_TOKEN:
dev_data.ep_ctrl[ep_idx].status.out_odd = odd;
/* clear tx entries */
bdt[BD_IDX_EP0TX_EVEN].bd_fields = 0U;
bdt[BD_IDX_EP0TX_ODD].bd_fields = 0U;
/*
* Set/Reset here the toggle bits for control endpoint
* because the device stack does not care about it.
*/
dev_data.ep_ctrl[ep_idx].status.in_data1 = true;
dev_data.ep_ctrl[ep_idx].status.out_data1 = false;
dev_data.ep_ctrl[ep_idx].status.out_odd = odd;
msg.cb = USB_DC_EP_SETUP;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
break;
case KINETIS_OUT_TOKEN:
dev_data.ep_ctrl[ep_idx].status.out_odd = odd;
msg.cb = USB_DC_EP_DATA_OUT;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
break;
case KINETIS_IN_TOKEN:
/* SET ADDRESS workaround */
if (dev_data.address & 0x80) {
USB0->ADDR = dev_data.address & 0x7f;
dev_data.address = 0U;
}
msg.cb = USB_DC_EP_DATA_IN;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
break;
default:
break;
}
}
if (istatus & USB_ISTAT_SLEEP_MASK) {
/* Enable resume interrupt */
USB0->INTEN |= USB_INTEN_RESUMEEN_MASK;
msg.ep = 0U;
msg.type = USB_DC_CB_TYPE_MGMT;
msg.cb = USB_DC_SUSPEND;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
}
if (istatus & USB_ISTAT_RESUME_MASK) {
/* Disable resume interrupt */
USB0->INTEN &= ~USB_INTEN_RESUMEEN_MASK;
msg.ep = 0U;
msg.type = USB_DC_CB_TYPE_MGMT;
msg.cb = USB_DC_RESUME;
k_msgq_put(&usb_dc_msgq, &msg, K_NO_WAIT);
}
/* Clear interrupt status bits */
USB0->ISTAT = istatus;
}
/*
* This thread is only used to not run the USB device stack and endpoint
* callbacks in the ISR context, which happens when an callback function
* is called. TODO: something similar should be implemented in the USB
* device stack so that it can be used by all drivers.
*/
static void usb_kinetis_thread_main(void *arg1, void *unused1, void *unused2)
{
ARG_UNUSED(arg1);
ARG_UNUSED(unused1);
ARG_UNUSED(unused2);
struct cb_msg msg;
uint8_t ep_idx;
while (true) {
k_msgq_get(&usb_dc_msgq, &msg, K_FOREVER);
ep_idx = USB_EP_GET_IDX(msg.ep);
if (msg.type == USB_DC_CB_TYPE_EP) {
switch (msg.cb) {
case USB_DC_EP_SETUP:
if (dev_data.ep_ctrl[ep_idx].cb_out) {
dev_data.ep_ctrl[ep_idx].cb_out(msg.ep,
USB_DC_EP_SETUP);
}
break;
case USB_DC_EP_DATA_OUT:
if (dev_data.ep_ctrl[ep_idx].cb_out) {
dev_data.ep_ctrl[ep_idx].cb_out(msg.ep,
USB_DC_EP_DATA_OUT);
}
break;
case USB_DC_EP_DATA_IN:
if (dev_data.ep_ctrl[ep_idx].cb_in) {
dev_data.ep_ctrl[ep_idx].cb_in(msg.ep,
USB_DC_EP_DATA_IN);
}
break;
default:
LOG_ERR("unknown msg");
break;
}
} else if (dev_data.status_cb) {
switch (msg.cb) {
case USB_DC_RESET:
dev_data.status_cb(USB_DC_RESET, NULL);
break;
case USB_DC_ERROR:
dev_data.status_cb(USB_DC_ERROR, NULL);
break;
case USB_DC_SUSPEND:
dev_data.status_cb(USB_DC_SUSPEND, NULL);
break;
case USB_DC_RESUME:
dev_data.status_cb(USB_DC_RESUME, NULL);
break;
default:
LOG_ERR("unknown msg");
break;
}
}
}
}
static int usb_kinetis_init(void)
{
k_thread_create(&dev_data.thread, dev_data.thread_stack,
USBD_THREAD_STACK_SIZE,
usb_kinetis_thread_main, NULL, NULL, NULL,
K_PRIO_COOP(2), 0, K_NO_WAIT);
k_thread_name_set(&dev_data.thread, "usb_kinetis");
IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority),
usb_kinetis_isr_handler, 0, 0);
irq_enable(DT_INST_IRQN(0));
return 0;
}
SYS_INIT(usb_kinetis_init, POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE);