blob: bc859873ac05d39fca3964efbad828555e4497c2 [file] [log] [blame]
# Copyright (c) 2017 I-SENSE group of ICCS
# SPDX-License-Identifier: Apache-2.0
description: STM32 I2C V2 controller
compatible: "st,stm32-i2c-v2"
include: [i2c-controller.yaml, pinctrl-device.yaml]
properties:
reg:
required: true
interrupts:
required: true
pinctrl-0:
required: true
pinctrl-names:
required: true
timings:
type: array
description: |
An optional table of pre-computed i2c timing values with the
matching clock configuration.
Precise timings values for a given Hardware can be pre-computed
with a tool like STM32CubeMX or directly from I2C_TIMINGR register
description.
Because timing value is valid for a given I2C peripheral clock
frequency and target I2C bus clock, each timing value must be
provided with the matching configuration.
The resulting table entries should look like <periph_clock
clock-frequency timing>
For example timings could be defined as
timings = <64000000 I2C_BITRATE_STANDARD 0x10707DBC>,
<64000000 I2C_BITRATE_FAST 0x00603D56>,
<56000000 I2C_BITRATE_STANDARD 0x10606DA4>,
<56000000 I2C_BITRATE_FAST 0x00501D63>;
scl-gpios:
type: phandle-array
description: |
GPIO to which the I2C SCL signal is routed. This is only needed for
I2C bus recovery support.
sda-gpios:
type: phandle-array
description: |
GPIO to which the I2C SDA signal is routed. This is only needed for
I2C bus recovery support.