drivers/ethernet/eth_dw.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2017 Intel Corporation.
  *
  * SPDX-License-Identifier: Apache-2.0
  */
 #define LOG_MODULE_NAME eth_dw
 #define LOG_LEVEL CONFIG_ETHERNET_LOG_LEVEL

 #include <logging/log.h>
 LOG_MODULE_REGISTER(LOG_MODULE_NAME);

 #include <soc.h>
 #include <device.h>
 #include <errno.h>
 #include <init.h>
 #include <kernel.h>
 #include <misc/__assert.h>
 #include <net/net_core.h>
 #include <net/net_pkt.h>
 #include <stdbool.h>
 #include <stdio.h>
 #include <string.h>
 #include <sys_io.h>
 #include <net/ethernet.h>
 #include <ethernet/eth_stats.h>

 #include "eth_dw_priv.h"

 #ifdef CONFIG_SHARED_IRQ
 #include <shared_irq.h>
 #endif

 #define TX_BUSY_LOOP_SPINS 20

 static inline u32_t eth_read(u32_t base_addr, u32_t offset)
 {
 	return sys_read32(base_addr + offset);
 }

 static inline void eth_write(u32_t base_addr, u32_t offset,
 			     u32_t val)
 {
 	sys_write32(val, base_addr + offset);
 }

 static void eth_rx(struct device *dev)
 {
 	struct eth_runtime *context = dev->driver_data;
 	struct net_pkt *pkt;
 	u32_t frm_len;
 	int r;

 	/* Check whether the RX descriptor is still owned by the device.  If not,
 	 * process the received frame or an error that may have occurred.
 	 */
 	if (context->rx_desc.own) {
 		LOG_ERR("Spurious receive interrupt from Ethernet MAC");
 		return;
 	}

 	if (context->rx_desc.err_summary) {
 		LOG_ERR("Error receiving frame: RDES0 = %08x, RDES1 = %08x",
 			context->rx_desc.rdes0, context->rx_desc.rdes1);
 		goto release_desc;
 	}

 	frm_len = context->rx_desc.frm_len;
 	if (frm_len > sizeof(context->rx_buf)) {
 		LOG_ERR("Frame too large: %u", frm_len);
 		goto release_desc;
 	}

 	/* Throw away the last 4 bytes (CRC).  See Intel® Quark TM SoC X1000
 	 * datasheet, Table 95 (Receive Descriptor Fields (RDES0)), "frame
 	 * length":
 	 *    These bits indicate the byte length of the received frame that
 	 *    was transferred to host memory (including CRC).
 	 * If the CRC is not removed here, packet processing in upper layers
 	 * will fail since the packet length will be different from the
 	 * received frame length by exactly 4 bytes.
 	 */
 	if (frm_len < sizeof(u32_t)) {
 		LOG_ERR("Frame too small: %u", frm_len);
 		goto error;
 	} else {
 		frm_len -= sizeof(u32_t);
 	}

 	pkt = net_pkt_rx_alloc_with_buffer(context->iface, frm_len,
 					   AF_UNSPEC, 0, K_NO_WAIT);
 	if (!pkt) {
 		LOG_ERR("Failed to obtain RX buffer");
 		goto error;
 	}

 	if (net_pkt_write(pkt, (void *)context->rx_buf, frm_len)) {
 		LOG_ERR("Failed to append RX buffer to context buffer");
 		net_pkt_unref(pkt);
 		goto error;
 	}

 	r = net_recv_data(context->iface, pkt);
 	if (r < 0) {
 		LOG_ERR("Failed to enqueue frame into RX queue: %d", r);
 		net_pkt_unref(pkt);
 		goto error;
 	}

 	goto release_desc;
 error:
 	eth_stats_update_errors_rx(context->iface);
 release_desc:
 	/* Return ownership of the RX descriptor to the device. */
 	context->rx_desc.own = 1U;

 	/* Request that the device check for an available RX descriptor, since
 	 * ownership of the descriptor was just transferred to the device.
 	 */
 	eth_write(context->base_addr, REG_ADDR_RX_POLL_DEMAND, 1);
 }

 static void eth_tx_spin_wait(struct eth_runtime *context)
 {
 	int spins;

 	for (spins = 0; spins < TX_BUSY_LOOP_SPINS; spins++) {
 		if (!context->tx_desc.own) {
 			return;
 		}
 	}

 	while (context->tx_desc.own) {
 		k_yield();
 	}
 }

 static void eth_tx_data(struct eth_runtime *context, u8_t *data, u16_t len)
 {
 #if CONFIG_ETHERNET_LOG_LEVEL >= LOG_LEVEL_DBG
 	/* Check whether an error occurred transmitting the previous frame. */
 	if (context->tx_desc.err_summary) {
 		LOG_ERR("Error transmitting frame: TDES0 = %08x,"
 			"TDES1 = %08x", context->tx_desc.tdes0,
 			context->tx_desc.tdes1);
 	}
 #endif

 	/* Update transmit descriptor. */
 	context->tx_desc.buf1_ptr = data;
 	context->tx_desc.tx_buf1_sz = len;
 	eth_write(context->base_addr, REG_ADDR_TX_DESC_LIST,
 		  (u32_t)&context->tx_desc);

 	context->tx_desc.own = 1U;

 	/* Request that the device check for an available TX descriptor, since
 	 * ownership of the descriptor was just transferred to the device.
 	 */
 	eth_write(context->base_addr, REG_ADDR_TX_POLL_DEMAND, 1);

 	/* Ensure DMA transfer has been completed. */
 	eth_tx_spin_wait(context);
 }

 /* @brief Transmit the current Ethernet frame.
  *
  *	This procedure will block indefinitely until all fragments from a
  *	net_buf have been transmitted.  Data is copied using DMA directly
  *	from each fragment's data pointer.  This procedure might yield to
  *	other threads  while waiting for the DMA transfer to finish.
  */
 static int eth_tx(struct device *dev, struct net_pkt *pkt)
 {
 	struct eth_runtime *context = dev->driver_data;
 	struct net_buf *frag;

 	/* Ensure we're clear to transmit. */
 	eth_tx_spin_wait(context);

 	for (frag = pkt->frags; frag; frag = frag->frags) {
 		eth_tx_data(context, frag->data, frag->len);
 	}

 	return 0;
 }

 static void eth_dw_isr(struct device *dev)
 {
 	struct eth_runtime *context = dev->driver_data;
 #ifdef CONFIG_SHARED_IRQ
 	u32_t int_status;

 	int_status = eth_read(context->base_addr, REG_ADDR_STATUS);

 	/* If using with shared IRQ, this function will be called
 	 * by the shared IRQ driver. So check here if the interrupt
 	 * is coming from the GPIO controller (or somewhere else).
 	 */
 	if ((int_status & STATUS_RX_INT) == 0) {
 		return;
 	}
 #endif
 	eth_rx(dev);

 	/* Acknowledge the interrupt. */
 	eth_write(context->base_addr, REG_ADDR_STATUS,
 		  STATUS_NORMAL_INT | STATUS_RX_INT);
 }

 #ifdef CONFIG_PCI
 static inline int eth_setup(struct device *dev)
 {
 	struct eth_runtime *context = dev->driver_data;

 	pci_bus_scan_init();

 	if (!pci_bus_scan(&context->pci_dev))
 		return 0;

 #ifdef CONFIG_PCI_ENUMERATION
 	context->base_addr = context->pci_dev.addr;
 #endif
 	pci_enable_regs(&context->pci_dev);
 	pci_enable_bus_master(&context->pci_dev);

 	pci_show(&context->pci_dev);

 	return 1;
 }
 #else
 #define eth_setup(_unused_) (1)
 #endif /* CONFIG_PCI */

 static int eth_initialize_internal(struct net_if *iface)
 {
 	struct device *dev = net_if_get_device(iface);
 	struct eth_runtime *context = dev->driver_data;
 	const struct eth_config *config = dev->config->config_info;
 	u32_t base_addr;

 	context->iface = iface;
 	base_addr = context->base_addr;

 	/* Read the MAC address from the device. */
 	context->mac_addr.words[1] = eth_read(base_addr, REG_ADDR_MACADDR_HI);
 	context->mac_addr.words[0] = eth_read(base_addr, REG_ADDR_MACADDR_LO);

 	net_if_set_link_addr(context->iface, context->mac_addr.bytes,
 			     sizeof(context->mac_addr.bytes),
 			     NET_LINK_ETHERNET);

 	/* Initialize the frame filter enabling unicast messages */
 	eth_write(base_addr, REG_ADDR_MAC_FRAME_FILTER, MAC_FILTER_4_PM);


 	/* Initialize receive descriptor. */
 	context->rx_desc.rdes0 = 0U;
 	context->rx_desc.rdes1 = 0U;

 	context->rx_desc.buf1_ptr = (u8_t *)context->rx_buf;
 	context->rx_desc.first_desc = 1U;
 	context->rx_desc.last_desc = 1U;
 	context->rx_desc.own = 1U;
 	context->rx_desc.rx_buf1_sz = sizeof(context->rx_buf);
 	context->rx_desc.rx_end_of_ring = 1U;

 	/* Install receive descriptor. */
 	eth_write(base_addr, REG_ADDR_RX_DESC_LIST, (u32_t)&context->rx_desc);

 	/* Initialize transmit descriptor. */
 	context->tx_desc.tdes0 = 0U;
 	context->tx_desc.tdes1 = 0U;
 	context->tx_desc.buf1_ptr = NULL;
 	context->tx_desc.tx_buf1_sz = 0U;
 	context->tx_desc.first_seg_in_frm = 1U;
 	context->tx_desc.last_seg_in_frm = 1U;
 	context->tx_desc.tx_end_of_ring = 1U;

 	/* Install transmit descriptor. */
 	eth_write(context->base_addr, REG_ADDR_TX_DESC_LIST,
 		  (u32_t)&context->tx_desc);

 	eth_write(base_addr, REG_ADDR_MAC_CONF,
 		  /* Set the RMII speed to 100Mbps */
 		  MAC_CONF_14_RMII_100M |
 		  /* Enable full-duplex mode */
 		  MAC_CONF_11_DUPLEX |
 		  /* Enable transmitter */
 		  MAC_CONF_3_TX_EN |
 		  /* Enable receiver */
 		  MAC_CONF_2_RX_EN);

 	eth_write(base_addr, REG_ADDR_INT_ENABLE,
 		  INT_ENABLE_NORMAL |
 		  /* Enable receive interrupts */
 		  INT_ENABLE_RX);

 	/* Mask all the MMC interrupts */
 	eth_write(base_addr, REG_MMC_RX_INTR_MASK, MMC_DEFAULT_MASK);
 	eth_write(base_addr, REG_MMC_TX_INTR_MASK, MMC_DEFAULT_MASK);
 	eth_write(base_addr, REG_MMC_RX_IPC_INTR_MASK, MMC_DEFAULT_MASK);

 	eth_write(base_addr, REG_ADDR_DMA_OPERATION,
 		  /* Enable receive store-and-forward mode for simplicity. */
 		  OP_MODE_25_RX_STORE_N_FORWARD |
 		  /* Enable transmit store-and-forward mode for simplicity. */
 		  OP_MODE_21_TX_STORE_N_FORWARD |
 		  /* Place the transmitter state machine in the Running state. */
 		  OP_MODE_13_START_TX |
 		  /* Place the receiver state machine in the Running state. */
 		  OP_MODE_1_START_RX);

 	LOG_INF("Enabled 100M full-duplex mode");

 	config->config_func(dev);

 	return 0;
 }

 static void eth_initialize(struct net_if *iface)
 {
 	int r = eth_initialize_internal(iface);

 	if (r < 0) {
 		LOG_ERR("Could not initialize ethernet device: %d", r);
 	}
 }

 static enum ethernet_hw_caps eth_dw_get_capabilities(struct device *dev)
 {
 	ARG_UNUSED(dev);

 	return ETHERNET_LINK_10BASE_T | ETHERNET_LINK_100BASE_T;
 }

 static const struct ethernet_api api_funcs = {
 	.iface_api.init = eth_initialize,

 	.get_capabilities = eth_dw_get_capabilities,
 	.send = eth_tx,
 };

 /* Bindings to the plaform */
 #if CONFIG_ETH_DW_0
 static void eth_config_0_irq(struct device *dev)
 {
 	const struct eth_config *config = dev->config->config_info;
 	struct device *shared_irq_dev;

 #ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
 	ARG_UNUSED(shared_irq_dev);
 	IRQ_CONNECT(ETH_DW_0_IRQ, CONFIG_ETH_DW_0_IRQ_PRI, eth_dw_isr,
 		    DEVICE_GET(eth_dw_0), 0);
 	irq_enable(ETH_DW_0_IRQ);
 #elif defined(CONFIG_ETH_DW_0_IRQ_SHARED)
 	shared_irq_dev = device_get_binding(config->shared_irq_dev_name);
 	__ASSERT(shared_irq_dev != NULL, "Failed to get eth_dw device binding");
 	shared_irq_isr_register(shared_irq_dev, (isr_t)eth_dw_isr, dev);
 	shared_irq_enable(shared_irq_dev, dev);
 #endif
 }

 static const struct eth_config eth_config_0 = {
 #ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
 	.irq_num		= ETH_DW_0_IRQ,
 #endif
 	.config_func		= eth_config_0_irq,

 #ifdef CONFIG_ETH_DW_0_IRQ_SHARED
 	.shared_irq_dev_name	= DT_ETH_DW_0_IRQ_SHARED_NAME,
 #endif
 };

 static struct eth_runtime eth_0_runtime = {
 	.base_addr		= ETH_DW_0_BASE_ADDR,
 #if CONFIG_PCI
 	.pci_dev.class_type	= ETH_DW_PCI_CLASS,
 	.pci_dev.bus		= ETH_DW_0_PCI_BUS,
 	.pci_dev.dev		= ETH_DW_0_PCI_DEV,
 	.pci_dev.vendor_id	= ETH_DW_PCI_VENDOR_ID,
 	.pci_dev.device_id	= ETH_DW_PCI_DEVICE_ID,
 	.pci_dev.function	= ETH_DW_0_PCI_FUNCTION,
 	.pci_dev.bar		= ETH_DW_0_PCI_BAR,
 #endif
 };

 NET_DEVICE_INIT(eth_dw_0, CONFIG_ETH_DW_0_NAME,
 		eth_setup, &eth_0_runtime,
 		&eth_config_0, CONFIG_ETH_INIT_PRIORITY, &api_funcs,
 		ETHERNET_L2, NET_L2_GET_CTX_TYPE(ETHERNET_L2),
 		NET_ETH_MTU);
 #endif  /* CONFIG_ETH_DW_0 */
	/*
	* Copyright (c) 2017 Intel Corporation.
	*
	* SPDX-License-Identifier: Apache-2.0
	*/
	#define LOG_MODULE_NAME eth_dw
	#define LOG_LEVEL CONFIG_ETHERNET_LOG_LEVEL

	#include <logging/log.h>
	LOG_MODULE_REGISTER(LOG_MODULE_NAME);

	#include <soc.h>
	#include <device.h>
	#include <errno.h>
	#include <init.h>
	#include <kernel.h>
	#include <misc/__assert.h>
	#include <net/net_core.h>
	#include <net/net_pkt.h>
	#include <stdbool.h>
	#include <stdio.h>
	#include <string.h>
	#include <sys_io.h>
	#include <net/ethernet.h>
	#include <ethernet/eth_stats.h>

	#include "eth_dw_priv.h"

	#ifdef CONFIG_SHARED_IRQ
	#include <shared_irq.h>
	#endif

	#define TX_BUSY_LOOP_SPINS 20

	static inline u32_t eth_read(u32_t base_addr, u32_t offset)
	{
	return sys_read32(base_addr + offset);
	}

	static inline void eth_write(u32_t base_addr, u32_t offset,
	u32_t val)
	{
	sys_write32(val, base_addr + offset);
	}

	static void eth_rx(struct device *dev)
	{
	struct eth_runtime *context = dev->driver_data;
	struct net_pkt *pkt;
	u32_t frm_len;
	int r;

	/* Check whether the RX descriptor is still owned by the device. If not,
	* process the received frame or an error that may have occurred.
	*/
	if (context->rx_desc.own) {
	LOG_ERR("Spurious receive interrupt from Ethernet MAC");
	return;
	}

	if (context->rx_desc.err_summary) {
	LOG_ERR("Error receiving frame: RDES0 = %08x, RDES1 = %08x",
	context->rx_desc.rdes0, context->rx_desc.rdes1);
	goto release_desc;
	}

	frm_len = context->rx_desc.frm_len;
	if (frm_len > sizeof(context->rx_buf)) {
	LOG_ERR("Frame too large: %u", frm_len);
	goto release_desc;
	}

	/* Throw away the last 4 bytes (CRC). See Intel® Quark TM SoC X1000
	* datasheet, Table 95 (Receive Descriptor Fields (RDES0)), "frame
	* length":
	* These bits indicate the byte length of the received frame that
	* was transferred to host memory (including CRC).
	* If the CRC is not removed here, packet processing in upper layers
	* will fail since the packet length will be different from the
	* received frame length by exactly 4 bytes.
	*/
	if (frm_len < sizeof(u32_t)) {
	LOG_ERR("Frame too small: %u", frm_len);
	goto error;
	} else {
	frm_len -= sizeof(u32_t);
	}

	pkt = net_pkt_rx_alloc_with_buffer(context->iface, frm_len,
	AF_UNSPEC, 0, K_NO_WAIT);
	if (!pkt) {
	LOG_ERR("Failed to obtain RX buffer");
	goto error;
	}

	if (net_pkt_write(pkt, (void *)context->rx_buf, frm_len)) {
	LOG_ERR("Failed to append RX buffer to context buffer");
	net_pkt_unref(pkt);
	goto error;
	}

	r = net_recv_data(context->iface, pkt);
	if (r < 0) {
	LOG_ERR("Failed to enqueue frame into RX queue: %d", r);
	net_pkt_unref(pkt);
	goto error;
	}

	goto release_desc;
	error:
	eth_stats_update_errors_rx(context->iface);
	release_desc:
	/* Return ownership of the RX descriptor to the device. */
	context->rx_desc.own = 1U;

	/* Request that the device check for an available RX descriptor, since
	* ownership of the descriptor was just transferred to the device.
	*/
	eth_write(context->base_addr, REG_ADDR_RX_POLL_DEMAND, 1);
	}

	static void eth_tx_spin_wait(struct eth_runtime *context)
	{
	int spins;

	for (spins = 0; spins < TX_BUSY_LOOP_SPINS; spins++) {
	if (!context->tx_desc.own) {
	return;
	}
	}

	while (context->tx_desc.own) {
	k_yield();
	}
	}

	static void eth_tx_data(struct eth_runtime context, u8_t data, u16_t len)
	{
	#if CONFIG_ETHERNET_LOG_LEVEL >= LOG_LEVEL_DBG
	/* Check whether an error occurred transmitting the previous frame. */
	if (context->tx_desc.err_summary) {
	LOG_ERR("Error transmitting frame: TDES0 = %08x,"
	"TDES1 = %08x", context->tx_desc.tdes0,
	context->tx_desc.tdes1);
	}
	#endif

	/* Update transmit descriptor. */
	context->tx_desc.buf1_ptr = data;
	context->tx_desc.tx_buf1_sz = len;
	eth_write(context->base_addr, REG_ADDR_TX_DESC_LIST,
	(u32_t)&context->tx_desc);

	context->tx_desc.own = 1U;

	/* Request that the device check for an available TX descriptor, since
	* ownership of the descriptor was just transferred to the device.
	*/
	eth_write(context->base_addr, REG_ADDR_TX_POLL_DEMAND, 1);

	/* Ensure DMA transfer has been completed. */
	eth_tx_spin_wait(context);
	}

	/* @brief Transmit the current Ethernet frame.
	*
	* This procedure will block indefinitely until all fragments from a
	* net_buf have been transmitted. Data is copied using DMA directly
	* from each fragment's data pointer. This procedure might yield to
	* other threads while waiting for the DMA transfer to finish.
	*/
	static int eth_tx(struct device dev, struct net_pkt pkt)
	{
	struct eth_runtime *context = dev->driver_data;
	struct net_buf *frag;

	/* Ensure we're clear to transmit. */
	eth_tx_spin_wait(context);

	for (frag = pkt->frags; frag; frag = frag->frags) {
	eth_tx_data(context, frag->data, frag->len);
	}

	return 0;
	}

	static void eth_dw_isr(struct device *dev)
	{
	struct eth_runtime *context = dev->driver_data;
	#ifdef CONFIG_SHARED_IRQ
	u32_t int_status;

	int_status = eth_read(context->base_addr, REG_ADDR_STATUS);

	/* If using with shared IRQ, this function will be called
	* by the shared IRQ driver. So check here if the interrupt
	* is coming from the GPIO controller (or somewhere else).
	*/
	if ((int_status & STATUS_RX_INT) == 0) {
	return;
	}
	#endif
	eth_rx(dev);

	/* Acknowledge the interrupt. */
	eth_write(context->base_addr, REG_ADDR_STATUS,
	STATUS_NORMAL_INT \| STATUS_RX_INT);
	}

	#ifdef CONFIG_PCI
	static inline int eth_setup(struct device *dev)
	{
	struct eth_runtime *context = dev->driver_data;

	pci_bus_scan_init();

	if (!pci_bus_scan(&context->pci_dev))
	return 0;

	#ifdef CONFIG_PCI_ENUMERATION
	context->base_addr = context->pci_dev.addr;
	#endif
	pci_enable_regs(&context->pci_dev);
	pci_enable_bus_master(&context->pci_dev);

	pci_show(&context->pci_dev);

	return 1;
	}
	#else
	#define eth_setup(_unused_) (1)
	#endif /* CONFIG_PCI */

	static int eth_initialize_internal(struct net_if *iface)
	{
	struct device *dev = net_if_get_device(iface);
	struct eth_runtime *context = dev->driver_data;
	const struct eth_config *config = dev->config->config_info;
	u32_t base_addr;

	context->iface = iface;
	base_addr = context->base_addr;

	/* Read the MAC address from the device. */
	context->mac_addr.words[1] = eth_read(base_addr, REG_ADDR_MACADDR_HI);
	context->mac_addr.words[0] = eth_read(base_addr, REG_ADDR_MACADDR_LO);

	net_if_set_link_addr(context->iface, context->mac_addr.bytes,
	sizeof(context->mac_addr.bytes),
	NET_LINK_ETHERNET);

	/* Initialize the frame filter enabling unicast messages */
	eth_write(base_addr, REG_ADDR_MAC_FRAME_FILTER, MAC_FILTER_4_PM);


	/* Initialize receive descriptor. */
	context->rx_desc.rdes0 = 0U;
	context->rx_desc.rdes1 = 0U;

	context->rx_desc.buf1_ptr = (u8_t *)context->rx_buf;
	context->rx_desc.first_desc = 1U;
	context->rx_desc.last_desc = 1U;
	context->rx_desc.own = 1U;
	context->rx_desc.rx_buf1_sz = sizeof(context->rx_buf);
	context->rx_desc.rx_end_of_ring = 1U;

	/* Install receive descriptor. */
	eth_write(base_addr, REG_ADDR_RX_DESC_LIST, (u32_t)&context->rx_desc);

	/* Initialize transmit descriptor. */
	context->tx_desc.tdes0 = 0U;
	context->tx_desc.tdes1 = 0U;
	context->tx_desc.buf1_ptr = NULL;
	context->tx_desc.tx_buf1_sz = 0U;
	context->tx_desc.first_seg_in_frm = 1U;
	context->tx_desc.last_seg_in_frm = 1U;
	context->tx_desc.tx_end_of_ring = 1U;

	/* Install transmit descriptor. */
	eth_write(context->base_addr, REG_ADDR_TX_DESC_LIST,
	(u32_t)&context->tx_desc);

	eth_write(base_addr, REG_ADDR_MAC_CONF,
	/* Set the RMII speed to 100Mbps */
	MAC_CONF_14_RMII_100M \|
	/* Enable full-duplex mode */
	MAC_CONF_11_DUPLEX \|
	/* Enable transmitter */
	MAC_CONF_3_TX_EN \|
	/* Enable receiver */
	MAC_CONF_2_RX_EN);

	eth_write(base_addr, REG_ADDR_INT_ENABLE,
	INT_ENABLE_NORMAL \|
	/* Enable receive interrupts */
	INT_ENABLE_RX);

	/* Mask all the MMC interrupts */
	eth_write(base_addr, REG_MMC_RX_INTR_MASK, MMC_DEFAULT_MASK);
	eth_write(base_addr, REG_MMC_TX_INTR_MASK, MMC_DEFAULT_MASK);
	eth_write(base_addr, REG_MMC_RX_IPC_INTR_MASK, MMC_DEFAULT_MASK);

	eth_write(base_addr, REG_ADDR_DMA_OPERATION,
	/* Enable receive store-and-forward mode for simplicity. */
	OP_MODE_25_RX_STORE_N_FORWARD \|
	/* Enable transmit store-and-forward mode for simplicity. */
	OP_MODE_21_TX_STORE_N_FORWARD \|
	/* Place the transmitter state machine in the Running state. */
	OP_MODE_13_START_TX \|
	/* Place the receiver state machine in the Running state. */
	OP_MODE_1_START_RX);

	LOG_INF("Enabled 100M full-duplex mode");

	config->config_func(dev);

	return 0;
	}

	static void eth_initialize(struct net_if *iface)
	{
	int r = eth_initialize_internal(iface);

	if (r < 0) {
	LOG_ERR("Could not initialize ethernet device: %d", r);
	}
	}

	static enum ethernet_hw_caps eth_dw_get_capabilities(struct device *dev)
	{
	ARG_UNUSED(dev);

	return ETHERNET_LINK_10BASE_T \| ETHERNET_LINK_100BASE_T;
	}

	static const struct ethernet_api api_funcs = {
	.iface_api.init = eth_initialize,

	.get_capabilities = eth_dw_get_capabilities,
	.send = eth_tx,
	};

	/* Bindings to the plaform */
	#if CONFIG_ETH_DW_0
	static void eth_config_0_irq(struct device *dev)
	{
	const struct eth_config *config = dev->config->config_info;
	struct device *shared_irq_dev;

	#ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
	ARG_UNUSED(shared_irq_dev);
	IRQ_CONNECT(ETH_DW_0_IRQ, CONFIG_ETH_DW_0_IRQ_PRI, eth_dw_isr,
	DEVICE_GET(eth_dw_0), 0);
	irq_enable(ETH_DW_0_IRQ);
	#elif defined(CONFIG_ETH_DW_0_IRQ_SHARED)
	shared_irq_dev = device_get_binding(config->shared_irq_dev_name);
	__ASSERT(shared_irq_dev != NULL, "Failed to get eth_dw device binding");
	shared_irq_isr_register(shared_irq_dev, (isr_t)eth_dw_isr, dev);
	shared_irq_enable(shared_irq_dev, dev);
	#endif
	}

	static const struct eth_config eth_config_0 = {
	#ifdef CONFIG_ETH_DW_0_IRQ_DIRECT
	.irq_num = ETH_DW_0_IRQ,
	#endif
	.config_func = eth_config_0_irq,

	#ifdef CONFIG_ETH_DW_0_IRQ_SHARED
	.shared_irq_dev_name = DT_ETH_DW_0_IRQ_SHARED_NAME,
	#endif
	};

	static struct eth_runtime eth_0_runtime = {
	.base_addr = ETH_DW_0_BASE_ADDR,
	#if CONFIG_PCI
	.pci_dev.class_type = ETH_DW_PCI_CLASS,
	.pci_dev.bus = ETH_DW_0_PCI_BUS,
	.pci_dev.dev = ETH_DW_0_PCI_DEV,
	.pci_dev.vendor_id = ETH_DW_PCI_VENDOR_ID,
	.pci_dev.device_id = ETH_DW_PCI_DEVICE_ID,
	.pci_dev.function = ETH_DW_0_PCI_FUNCTION,
	.pci_dev.bar = ETH_DW_0_PCI_BAR,
	#endif
	};

	NET_DEVICE_INIT(eth_dw_0, CONFIG_ETH_DW_0_NAME,
	eth_setup, &eth_0_runtime,
	&eth_config_0, CONFIG_ETH_INIT_PRIORITY, &api_funcs,
	ETHERNET_L2, NET_L2_GET_CTX_TYPE(ETHERNET_L2),
	NET_ETH_MTU);
	#endif /* CONFIG_ETH_DW_0 */