blob: 026c2e0d488b16345cf964d017c57855ffa0d280 [file] [log] [blame]
/*
* SPDX-License-Identifier: Apache-2.0
*
* Driver for the I/O controller (pinmux) for
* Texas Instrument's CC2650 SoC.
*
* For these SoCs, available pin functions are as follows:
*
* 0x00 - GPIO
* 0x07 - AON 32 Khz clock
* 0x08 - AUX IO
* 0x09 - SSI0 RX
* 0x0A - SSI0 TX
* 0x0B - SSI0 FSS
* 0x0C - SSI0 CLK
* 0x0D - I2C SDA
* 0x0E - I2C SCL
* 0x0F - UART0 RX
* 0x10 - UART0 TX
* 0x11 - UART0 CTS
* 0x12 - UART0 RTS
* 0x17 - Port event 0
* 0x18 - Port event 1
* 0x19 - Port event 2
* 0x1A - Port event 3
* 0x1B - Port event 4
* 0x1C - Port event 5
* 0x1D - Port event 6
* 0x1E - Port event 7
* 0x20 - CPU SWV
* 0x21 - SSI1 RX
* 0x22 - SSI1 TX
* 0x23 - SSI1 FSS
* 0x24 - SSI1 CLK
* 0x25 - I2S data 0
* 0x26 - I2S data 1
* 0x27 - I2S WCLK
* 0x28 - I2S BCLK
* 0x29 - I2S MCLK
* 0x2E - RF Core Trace
* 0x2F - RF Core data out 0
* 0x30 - RF Core data out 1
* 0x31 - RF Core data out 2
* 0x32 - RF Core data out 3
* 0x33 - RF Core data in 0
* 0x34 - RF Core data in 1
* 0x35 - RF Core SMI data link out
* 0x36 - RF Core SMI data link in
* 0x37 - RF Core SMI command link out
* 0x38 - RF Core SMI command link in
*/
#include <misc/__assert.h>
#include <misc/util.h>
#include <toolchain.h>
#include <device.h>
#include <pinmux.h>
#include <soc.h>
#include <sys_io.h>
#define IOCFG_REG(Func) \
REG_ADDR(DT_TI_CC2650_PINMUX_40081000_BASE_ADDRESS, \
CC2650_IOC_IOCFG0 + 0x4 * Func)
static int pinmux_cc2650_init(struct device *dev)
{
/* Do nothing */
ARG_UNUSED(dev);
return 0;
}
static int pinmux_cc2650_set(struct device *dev, u32_t pin,
u32_t func)
{
const u32_t iocfg = IOCFG_REG(pin);
u32_t conf = sys_read32(iocfg);
conf &= ~CC2650_IOC_IOCFGX_PORT_ID_MASK;
conf |= func & CC2650_IOC_IOCFGX_PORT_ID_MASK;
sys_write32(conf, iocfg);
return 0;
};
static int pinmux_cc2650_get(struct device *dev, u32_t pin,
u32_t *func)
{
const u32_t iocfg = IOCFG_REG(pin);
u32_t conf = sys_read32(iocfg);
*func = conf & CC2650_IOC_IOCFGX_PORT_ID_MASK;
return 0;
}
static int pinmux_cc2650_pullup(struct device *dev, u32_t pin,
u8_t func)
{
__ASSERT((func == PINMUX_PULLUP_ENABLE) |
(func == PINMUX_PULLUP_DISABLE),
"Pullup mode is invalid");
const u32_t iocfg = IOCFG_REG(pin);
u32_t conf = sys_read32(iocfg);
conf &= ~CC2650_IOC_IOCFGX_PULL_CTL_MASK;
if (func == PINMUX_PULLUP_ENABLE) {
conf |= CC2650_IOC_PULL_UP;
} else {
conf |= CC2650_IOC_NO_PULL;
}
sys_write32(conf, iocfg);
return 0;
}
static int pinmux_cc2650_input(struct device *dev, u32_t pin,
u8_t func)
{
__ASSERT((func == PINMUX_INPUT_ENABLED) |
(func == PINMUX_OUTPUT_ENABLED),
"I/O mode is invalid");
const u32_t iocfg = IOCFG_REG(pin);
const u32_t gpio_doe = DT_TI_CC2650_GPIO_40022000_BASE_ADDRESS +
CC2650_GPIO_DOE31_0;
u32_t iocfg_conf = sys_read32(iocfg);
u32_t gpio_doe_conf = sys_read32(gpio_doe);
iocfg_conf &= ~CC2650_IOC_IOCFGX_IE_MASK;
if (func == PINMUX_INPUT_ENABLED) {
iocfg_conf |= CC2650_IOC_INPUT_ENABLED;
gpio_doe_conf &= ~BIT(pin);
} else {
iocfg_conf |= CC2650_IOC_INPUT_DISABLED;
gpio_doe_conf |= BIT(pin);
}
sys_write32(iocfg_conf, iocfg);
sys_write32(gpio_doe_conf, gpio_doe);
return 0;
}
const struct pinmux_driver_api pinmux_cc2650_funcs = {
.set = pinmux_cc2650_set,
.get = pinmux_cc2650_get,
.pullup = pinmux_cc2650_pullup,
.input = pinmux_cc2650_input
};
DEVICE_AND_API_INIT(pinmux_cc2650_0, CONFIG_PINMUX_NAME,
pinmux_cc2650_init, NULL, NULL,
PRE_KERNEL_1, CONFIG_PINMUX_INIT_PRIORITY,
&pinmux_cc2650_funcs);