blob: 67ecb323360aff6ecac2cc15e476024c44a3b4ba [file] [log] [blame]
/*
* Copyright (c) 2016 BayLibre, SAS
*
* SPDX-License-Identifier: Apache-2.0
*/
#define LOG_LEVEL CONFIG_SPI_LOG_LEVEL
#include <logging/log.h>
LOG_MODULE_REGISTER(spi_ll_stm32);
#include <misc/util.h>
#include <kernel.h>
#include <soc.h>
#include <errno.h>
#include <spi.h>
#include <toolchain.h>
#include <clock_control/stm32_clock_control.h>
#include <clock_control.h>
#include "spi_ll_stm32.h"
#define DEV_CFG(dev) \
(const struct spi_stm32_config * const)(dev->config->config_info)
#define DEV_DATA(dev) \
(struct spi_stm32_data * const)(dev->driver_data)
/*
* Check for SPI_SR_FRE to determine support for TI mode frame format
* error flag, because STM32F1 SoCs do not support it and STM32CUBE
* for F1 family defines an unused LL_SPI_SR_FRE.
*/
#if defined(LL_SPI_SR_UDR)
#define SPI_STM32_ERR_MSK (LL_SPI_SR_UDR | LL_SPI_SR_CRCERR | LL_SPI_SR_MODF | \
LL_SPI_SR_OVR | LL_SPI_SR_FRE)
#elif defined(SPI_SR_FRE)
#define SPI_STM32_ERR_MSK (LL_SPI_SR_CRCERR | LL_SPI_SR_MODF | \
LL_SPI_SR_OVR | LL_SPI_SR_FRE)
#else
#define SPI_STM32_ERR_MSK (LL_SPI_SR_CRCERR | LL_SPI_SR_MODF | LL_SPI_SR_OVR)
#endif
/* Value to shift out when no application data needs transmitting. */
#define SPI_STM32_TX_NOP 0x00
static bool spi_stm32_transfer_ongoing(struct spi_stm32_data *data)
{
return spi_context_tx_on(&data->ctx) || spi_context_rx_on(&data->ctx);
}
static int spi_stm32_get_err(SPI_TypeDef *spi)
{
u32_t sr = LL_SPI_ReadReg(spi, SR);
if (sr & SPI_STM32_ERR_MSK) {
LOG_ERR("%s: err=%d", __func__,
sr & (u32_t)SPI_STM32_ERR_MSK);
/* OVR error must be explicitly cleared */
if (LL_SPI_IsActiveFlag_OVR(spi)) {
LL_SPI_ClearFlag_OVR(spi);
}
return -EIO;
}
return 0;
}
static inline u16_t spi_stm32_next_tx(struct spi_stm32_data *data)
{
u16_t tx_frame = SPI_STM32_TX_NOP;
if (spi_context_tx_buf_on(&data->ctx)) {
if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) {
tx_frame = UNALIGNED_GET((u8_t *)(data->ctx.tx_buf));
} else {
tx_frame = UNALIGNED_GET((u16_t *)(data->ctx.tx_buf));
}
}
return tx_frame;
}
/* Shift a SPI frame as master. */
static void spi_stm32_shift_m(SPI_TypeDef *spi, struct spi_stm32_data *data)
{
u16_t tx_frame;
u16_t rx_frame;
tx_frame = spi_stm32_next_tx(data);
while (!LL_SPI_IsActiveFlag_TXE(spi)) {
/* NOP */
}
if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) {
LL_SPI_TransmitData8(spi, tx_frame);
/* The update is ignored if TX is off. */
spi_context_update_tx(&data->ctx, 1, 1);
} else {
LL_SPI_TransmitData16(spi, tx_frame);
/* The update is ignored if TX is off. */
spi_context_update_tx(&data->ctx, 2, 1);
}
while (!LL_SPI_IsActiveFlag_RXNE(spi)) {
/* NOP */
}
if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) {
rx_frame = LL_SPI_ReceiveData8(spi);
if (spi_context_rx_buf_on(&data->ctx)) {
UNALIGNED_PUT(rx_frame, (u8_t *)data->ctx.rx_buf);
}
spi_context_update_rx(&data->ctx, 1, 1);
} else {
rx_frame = LL_SPI_ReceiveData16(spi);
if (spi_context_rx_buf_on(&data->ctx)) {
UNALIGNED_PUT(rx_frame, (u16_t *)data->ctx.rx_buf);
}
spi_context_update_rx(&data->ctx, 2, 1);
}
}
/* Shift a SPI frame as slave. */
static void spi_stm32_shift_s(SPI_TypeDef *spi, struct spi_stm32_data *data)
{
if (LL_SPI_IsActiveFlag_TXE(spi) && spi_context_tx_on(&data->ctx)) {
u16_t tx_frame = spi_stm32_next_tx(data);
if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) {
LL_SPI_TransmitData8(spi, tx_frame);
spi_context_update_tx(&data->ctx, 1, 1);
} else {
LL_SPI_TransmitData16(spi, tx_frame);
spi_context_update_tx(&data->ctx, 2, 1);
}
} else {
LL_SPI_DisableIT_TXE(spi);
}
if (LL_SPI_IsActiveFlag_RXNE(spi) && spi_context_rx_buf_on(&data->ctx)) {
u16_t rx_frame;
if (SPI_WORD_SIZE_GET(data->ctx.config->operation) == 8) {
rx_frame = LL_SPI_ReceiveData8(spi);
UNALIGNED_PUT(rx_frame, (u8_t *)data->ctx.rx_buf);
spi_context_update_rx(&data->ctx, 1, 1);
} else {
rx_frame = LL_SPI_ReceiveData16(spi);
UNALIGNED_PUT(rx_frame, (u16_t *)data->ctx.rx_buf);
spi_context_update_rx(&data->ctx, 2, 1);
}
}
}
/*
* Without a FIFO, we can only shift out one frame's worth of SPI
* data, and read the response back.
*
* TODO: support 16-bit data frames.
*/
static int spi_stm32_shift_frames(SPI_TypeDef *spi, struct spi_stm32_data *data)
{
u16_t operation = data->ctx.config->operation;
if (SPI_OP_MODE_GET(operation) == SPI_OP_MODE_MASTER) {
spi_stm32_shift_m(spi, data);
} else {
spi_stm32_shift_s(spi, data);
}
return spi_stm32_get_err(spi);
}
static void spi_stm32_complete(struct spi_stm32_data *data, SPI_TypeDef *spi,
int status)
{
#ifdef CONFIG_SPI_STM32_INTERRUPT
LL_SPI_DisableIT_TXE(spi);
LL_SPI_DisableIT_RXNE(spi);
LL_SPI_DisableIT_ERR(spi);
#endif
spi_context_cs_control(&data->ctx, false);
#if defined(CONFIG_SPI_STM32_HAS_FIFO)
/* Flush RX buffer */
while (LL_SPI_IsActiveFlag_RXNE(spi)) {
(void) LL_SPI_ReceiveData8(spi);
}
#endif
if (LL_SPI_GetMode(spi) == LL_SPI_MODE_MASTER) {
while (LL_SPI_IsActiveFlag_BSY(spi)) {
/* NOP */
}
}
LL_SPI_Disable(spi);
#ifdef CONFIG_SPI_STM32_INTERRUPT
spi_context_complete(&data->ctx, status);
#endif
}
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_isr(void *arg)
{
struct device * const dev = (struct device *) arg;
const struct spi_stm32_config *cfg = dev->config->config_info;
struct spi_stm32_data *data = dev->driver_data;
SPI_TypeDef *spi = cfg->spi;
int err;
err = spi_stm32_get_err(spi);
if (err) {
spi_stm32_complete(data, spi, err);
return;
}
if (spi_stm32_transfer_ongoing(data)) {
err = spi_stm32_shift_frames(spi, data);
}
if (err || !spi_stm32_transfer_ongoing(data)) {
spi_stm32_complete(data, spi, err);
}
}
#endif
static int spi_stm32_configure(struct device *dev,
const struct spi_config *config)
{
const struct spi_stm32_config *cfg = DEV_CFG(dev);
struct spi_stm32_data *data = DEV_DATA(dev);
const u32_t scaler[] = {
LL_SPI_BAUDRATEPRESCALER_DIV2,
LL_SPI_BAUDRATEPRESCALER_DIV4,
LL_SPI_BAUDRATEPRESCALER_DIV8,
LL_SPI_BAUDRATEPRESCALER_DIV16,
LL_SPI_BAUDRATEPRESCALER_DIV32,
LL_SPI_BAUDRATEPRESCALER_DIV64,
LL_SPI_BAUDRATEPRESCALER_DIV128,
LL_SPI_BAUDRATEPRESCALER_DIV256
};
SPI_TypeDef *spi = cfg->spi;
u32_t clock;
int br;
if (spi_context_configured(&data->ctx, config)) {
/* Nothing to do */
return 0;
}
if ((SPI_WORD_SIZE_GET(config->operation) != 8)
&& (SPI_WORD_SIZE_GET(config->operation) != 16)) {
return -ENOTSUP;
}
clock_control_get_rate(device_get_binding(STM32_CLOCK_CONTROL_NAME),
(clock_control_subsys_t) &cfg->pclken, &clock);
for (br = 1 ; br <= ARRAY_SIZE(scaler) ; ++br) {
u32_t clk = clock >> br;
if (clk <= config->frequency) {
break;
}
}
if (br > ARRAY_SIZE(scaler)) {
LOG_ERR("Unsupported frequency %uHz, max %uHz, min %uHz",
config->frequency,
clock >> 1,
clock >> ARRAY_SIZE(scaler));
return -EINVAL;
}
LL_SPI_Disable(spi);
LL_SPI_SetBaudRatePrescaler(spi, scaler[br - 1]);
if (SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) {
LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_HIGH);
} else {
LL_SPI_SetClockPolarity(spi, LL_SPI_POLARITY_LOW);
}
if (SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) {
LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_2EDGE);
} else {
LL_SPI_SetClockPhase(spi, LL_SPI_PHASE_1EDGE);
}
LL_SPI_SetTransferDirection(spi, LL_SPI_FULL_DUPLEX);
if (config->operation & SPI_TRANSFER_LSB) {
LL_SPI_SetTransferBitOrder(spi, LL_SPI_LSB_FIRST);
} else {
LL_SPI_SetTransferBitOrder(spi, LL_SPI_MSB_FIRST);
}
LL_SPI_DisableCRC(spi);
if (config->operation & SPI_OP_MODE_SLAVE) {
LL_SPI_SetMode(spi, LL_SPI_MODE_SLAVE);
} else {
LL_SPI_SetMode(spi, LL_SPI_MODE_MASTER);
}
if (config->cs) {
LL_SPI_SetNSSMode(spi, LL_SPI_NSS_SOFT);
} else {
if (config->operation & SPI_OP_MODE_SLAVE) {
LL_SPI_SetNSSMode(spi, LL_SPI_NSS_HARD_INPUT);
} else {
LL_SPI_SetNSSMode(spi, LL_SPI_NSS_HARD_OUTPUT);
}
}
if (SPI_WORD_SIZE_GET(config->operation) == 8) {
LL_SPI_SetDataWidth(spi, LL_SPI_DATAWIDTH_8BIT);
} else {
LL_SPI_SetDataWidth(spi, LL_SPI_DATAWIDTH_16BIT);
}
#if defined(CONFIG_SPI_STM32_HAS_FIFO)
LL_SPI_SetRxFIFOThreshold(spi, LL_SPI_RX_FIFO_TH_QUARTER);
#endif
#ifndef CONFIG_SOC_SERIES_STM32F1X
LL_SPI_SetStandard(spi, LL_SPI_PROTOCOL_MOTOROLA);
#endif
/* At this point, it's mandatory to set this on the context! */
data->ctx.config = config;
spi_context_cs_configure(&data->ctx);
LOG_DBG("Installed config %p: freq %uHz (div = %u),"
" mode %u/%u/%u, slave %u",
config, clock >> br, 1 << br,
(SPI_MODE_GET(config->operation) & SPI_MODE_CPOL) ? 1 : 0,
(SPI_MODE_GET(config->operation) & SPI_MODE_CPHA) ? 1 : 0,
(SPI_MODE_GET(config->operation) & SPI_MODE_LOOP) ? 1 : 0,
config->slave);
return 0;
}
static int spi_stm32_release(struct device *dev,
const struct spi_config *config)
{
struct spi_stm32_data *data = DEV_DATA(dev);
spi_context_unlock_unconditionally(&data->ctx);
return 0;
}
static int transceive(struct device *dev,
const struct spi_config *config,
const struct spi_buf_set *tx_bufs,
const struct spi_buf_set *rx_bufs,
bool asynchronous, struct k_poll_signal *signal)
{
const struct spi_stm32_config *cfg = DEV_CFG(dev);
struct spi_stm32_data *data = DEV_DATA(dev);
SPI_TypeDef *spi = cfg->spi;
int ret;
if (!tx_bufs && !rx_bufs) {
return 0;
}
#ifndef CONFIG_SPI_STM32_INTERRUPT
if (asynchronous) {
return -ENOTSUP;
}
#endif
spi_context_lock(&data->ctx, asynchronous, signal);
ret = spi_stm32_configure(dev, config);
if (ret) {
return ret;
}
/* Set buffers info */
spi_context_buffers_setup(&data->ctx, tx_bufs, rx_bufs, 1);
#if defined(CONFIG_SPI_STM32_HAS_FIFO)
/* Flush RX buffer */
while (LL_SPI_IsActiveFlag_RXNE(spi)) {
(void) LL_SPI_ReceiveData8(spi);
}
#endif
LL_SPI_Enable(spi);
/* This is turned off in spi_stm32_complete(). */
spi_context_cs_control(&data->ctx, true);
#ifdef CONFIG_SPI_STM32_INTERRUPT
LL_SPI_EnableIT_ERR(spi);
if (rx_bufs) {
LL_SPI_EnableIT_RXNE(spi);
}
LL_SPI_EnableIT_TXE(spi);
ret = spi_context_wait_for_completion(&data->ctx);
#else
do {
ret = spi_stm32_shift_frames(spi, data);
} while (!ret && spi_stm32_transfer_ongoing(data));
spi_stm32_complete(data, spi, ret);
#ifdef CONFIG_SPI_SLAVE
if (spi_context_is_slave(&data->ctx) && !ret) {
ret = data->ctx.recv_frames;
}
#endif /* CONFIG_SPI_SLAVE */
#endif
spi_context_release(&data->ctx, ret);
return ret;
}
static int spi_stm32_transceive(struct device *dev,
const struct spi_config *config,
const struct spi_buf_set *tx_bufs,
const struct spi_buf_set *rx_bufs)
{
return transceive(dev, config, tx_bufs, rx_bufs, false, NULL);
}
#ifdef CONFIG_SPI_ASYNC
static int spi_stm32_transceive_async(struct device *dev,
const struct spi_config *config,
const struct spi_buf_set *tx_bufs,
const struct spi_buf_set *rx_bufs,
struct k_poll_signal *async)
{
return transceive(dev, config, tx_bufs, rx_bufs, true, async);
}
#endif /* CONFIG_SPI_ASYNC */
static const struct spi_driver_api api_funcs = {
.transceive = spi_stm32_transceive,
#ifdef CONFIG_SPI_ASYNC
.transceive_async = spi_stm32_transceive_async,
#endif
.release = spi_stm32_release,
};
static int spi_stm32_init(struct device *dev)
{
struct spi_stm32_data *data __attribute__((unused)) = dev->driver_data;
const struct spi_stm32_config *cfg = dev->config->config_info;
__ASSERT_NO_MSG(device_get_binding(STM32_CLOCK_CONTROL_NAME));
if (clock_control_on(device_get_binding(STM32_CLOCK_CONTROL_NAME),
(clock_control_subsys_t) &cfg->pclken) != 0) {
LOG_ERR("Could not enable SPI clock");
return -EIO;
}
#ifdef CONFIG_SPI_STM32_INTERRUPT
cfg->irq_config(dev);
#endif
spi_context_unlock_unconditionally(&data->ctx);
return 0;
}
#ifdef CONFIG_SPI_1
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_1(struct device *port);
#endif
static const struct spi_stm32_config spi_stm32_cfg_1 = {
.spi = (SPI_TypeDef *) DT_SPI_1_BASE_ADDRESS,
.pclken = {
.enr = DT_SPI_1_CLOCK_BITS,
.bus = DT_SPI_1_CLOCK_BUS
},
#ifdef CONFIG_SPI_STM32_INTERRUPT
.irq_config = spi_stm32_irq_config_func_1,
#endif
};
static struct spi_stm32_data spi_stm32_dev_data_1 = {
SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_1, ctx),
SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_1, ctx),
};
DEVICE_AND_API_INIT(spi_stm32_1, DT_SPI_1_NAME, &spi_stm32_init,
&spi_stm32_dev_data_1, &spi_stm32_cfg_1,
POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,
&api_funcs);
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_1(struct device *dev)
{
IRQ_CONNECT(DT_SPI_1_IRQ, DT_SPI_1_IRQ_PRI,
spi_stm32_isr, DEVICE_GET(spi_stm32_1), 0);
irq_enable(DT_SPI_1_IRQ);
}
#endif
#endif /* CONFIG_SPI_1 */
#ifdef CONFIG_SPI_2
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_2(struct device *port);
#endif
static const struct spi_stm32_config spi_stm32_cfg_2 = {
.spi = (SPI_TypeDef *) DT_SPI_2_BASE_ADDRESS,
.pclken = {
.enr = DT_SPI_2_CLOCK_BITS,
.bus = DT_SPI_2_CLOCK_BUS
},
#ifdef CONFIG_SPI_STM32_INTERRUPT
.irq_config = spi_stm32_irq_config_func_2,
#endif
};
static struct spi_stm32_data spi_stm32_dev_data_2 = {
SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_2, ctx),
SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_2, ctx),
};
DEVICE_AND_API_INIT(spi_stm32_2, DT_SPI_2_NAME, &spi_stm32_init,
&spi_stm32_dev_data_2, &spi_stm32_cfg_2,
POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,
&api_funcs);
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_2(struct device *dev)
{
IRQ_CONNECT(DT_SPI_2_IRQ, DT_SPI_2_IRQ_PRI,
spi_stm32_isr, DEVICE_GET(spi_stm32_2), 0);
irq_enable(DT_SPI_2_IRQ);
}
#endif
#endif /* CONFIG_SPI_2 */
#ifdef CONFIG_SPI_3
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_3(struct device *port);
#endif
static const struct spi_stm32_config spi_stm32_cfg_3 = {
.spi = (SPI_TypeDef *) DT_SPI_3_BASE_ADDRESS,
.pclken = {
.enr = DT_SPI_3_CLOCK_BITS,
.bus = DT_SPI_3_CLOCK_BUS
},
#ifdef CONFIG_SPI_STM32_INTERRUPT
.irq_config = spi_stm32_irq_config_func_3,
#endif
};
static struct spi_stm32_data spi_stm32_dev_data_3 = {
SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_3, ctx),
SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_3, ctx),
};
DEVICE_AND_API_INIT(spi_stm32_3, DT_SPI_3_NAME, &spi_stm32_init,
&spi_stm32_dev_data_3, &spi_stm32_cfg_3,
POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,
&api_funcs);
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_3(struct device *dev)
{
IRQ_CONNECT(DT_SPI_3_IRQ, DT_SPI_3_IRQ_PRI,
spi_stm32_isr, DEVICE_GET(spi_stm32_3), 0);
irq_enable(DT_SPI_3_IRQ);
}
#endif
#endif /* CONFIG_SPI_3 */
#ifdef CONFIG_SPI_4
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_4(struct device *port);
#endif
static const struct spi_stm32_config spi_stm32_cfg_4 = {
.spi = (SPI_TypeDef *) DT_SPI_4_BASE_ADDRESS,
.pclken = {
.enr = DT_SPI_4_CLOCK_BITS,
.bus = DT_SPI_4_CLOCK_BUS
},
#ifdef CONFIG_SPI_STM32_INTERRUPT
.irq_config = spi_stm32_irq_config_func_4,
#endif
};
static struct spi_stm32_data spi_stm32_dev_data_4 = {
SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_4, ctx),
SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_4, ctx),
};
DEVICE_AND_API_INIT(spi_stm32_4, DT_SPI_4_NAME, &spi_stm32_init,
&spi_stm32_dev_data_4, &spi_stm32_cfg_4,
POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,
&api_funcs);
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_4(struct device *dev)
{
IRQ_CONNECT(DT_SPI_4_IRQ, DT_SPI_4_IRQ_PRI,
spi_stm32_isr, DEVICE_GET(spi_stm32_4), 0);
irq_enable(DT_SPI_4_IRQ);
}
#endif
#endif /* CONFIG_SPI_4 */
#ifdef CONFIG_SPI_5
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_5(struct device *port);
#endif
static const struct spi_stm32_config spi_stm32_cfg_5 = {
.spi = (SPI_TypeDef *) DT_SPI_5_BASE_ADDRESS,
.pclken = {
.enr = DT_SPI_5_CLOCK_BITS,
.bus = DT_SPI_5_CLOCK_BUS
},
#ifdef CONFIG_SPI_STM32_INTERRUPT
.irq_config = spi_stm32_irq_config_func_5,
#endif
};
static struct spi_stm32_data spi_stm32_dev_data_5 = {
SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_5, ctx),
SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_5, ctx),
};
DEVICE_AND_API_INIT(spi_stm32_5, DT_SPI_5_NAME, &spi_stm32_init,
&spi_stm32_dev_data_5, &spi_stm32_cfg_5,
POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,
&api_funcs);
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_5(struct device *dev)
{
IRQ_CONNECT(DT_SPI_5_IRQ, DT_SPI_5_IRQ_PRI,
spi_stm32_isr, DEVICE_GET(spi_stm32_5), 0);
irq_enable(DT_SPI_5_IRQ);
}
#endif
#endif /* CONFIG_SPI_5 */
#ifdef CONFIG_SPI_6
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_6(struct device *port);
#endif
static const struct spi_stm32_config spi_stm32_cfg_6 = {
.spi = (SPI_TypeDef *) DT_SPI_6_BASE_ADDRESS,
.pclken = {
.enr = DT_SPI_6_CLOCK_BITS,
.bus = DT_SPI_6_CLOCK_BUS
},
#ifdef CONFIG_SPI_STM32_INTERRUPT
.irq_config = spi_stm32_irq_config_func_6,
#endif
};
static struct spi_stm32_data spi_stm32_dev_data_6 = {
SPI_CONTEXT_INIT_LOCK(spi_stm32_dev_data_6, ctx),
SPI_CONTEXT_INIT_SYNC(spi_stm32_dev_data_6, ctx),
};
DEVICE_AND_API_INIT(spi_stm32_6, DT_SPI_6_NAME, &spi_stm32_init,
&spi_stm32_dev_data_6, &spi_stm32_cfg_6,
POST_KERNEL, CONFIG_SPI_INIT_PRIORITY,
&api_funcs);
#ifdef CONFIG_SPI_STM32_INTERRUPT
static void spi_stm32_irq_config_func_6(struct device *dev)
{
IRQ_CONNECT(DT_SPI_6_IRQ, DT_SPI_6_IRQ_PRI,
spi_stm32_isr, DEVICE_GET(spi_stm32_6), 0);
irq_enable(DT_SPI_6_IRQ);
}
#endif
#endif /* CONFIG_SPI_6 */