blob: 7cfaa6840021740b6538676cf0aaf51599fb4bb4 [file] [log] [blame]
/**
* @file
*
* @brief Public APIs for the I2C drivers.
*/
/*
* Copyright (c) 2015 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_INCLUDE_I2C_H_
#define ZEPHYR_INCLUDE_I2C_H_
/**
* @brief I2C Interface
* @defgroup i2c_interface I2C Interface
* @ingroup io_interfaces
* @{
*/
#include <zephyr/types.h>
#include <device.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* The following #defines are used to configure the I2C controller.
*/
/** I2C Standard Speed */
#define I2C_SPEED_STANDARD (0x1U)
/** I2C Fast Speed */
#define I2C_SPEED_FAST (0x2U)
/** I2C Fast Plus Speed */
#define I2C_SPEED_FAST_PLUS (0x3U)
/** I2C High Speed */
#define I2C_SPEED_HIGH (0x4U)
/** I2C Ultra Fast Speed */
#define I2C_SPEED_ULTRA (0x5U)
#define I2C_SPEED_SHIFT (1U)
#define I2C_SPEED_SET(speed) (((speed) << I2C_SPEED_SHIFT) \
& I2C_SPEED_MASK)
#define I2C_SPEED_MASK (0x7U << I2C_SPEED_SHIFT) /* 3 bits */
#define I2C_SPEED_GET(cfg) (((cfg) & I2C_SPEED_MASK) \
>> I2C_SPEED_SHIFT)
/** Use 10-bit addressing. DEPRECATED - Use I2C_MSG_ADDR_10_BITS instead. */
#define I2C_ADDR_10_BITS BIT(0)
/** Controller to act as Master. */
#define I2C_MODE_MASTER BIT(4)
/*
* The following #defines are used to configure the I2C slave device
*/
/** Slave device responds to 10-bit addressing. */
#define I2C_SLAVE_FLAGS_ADDR_10_BITS BIT(0)
/*
* I2C_MSG_* are I2C Message flags.
*/
/** Write message to I2C bus. */
#define I2C_MSG_WRITE (0U << 0U)
/** Read message from I2C bus. */
#define I2C_MSG_READ BIT(0)
/** @cond INTERNAL_HIDDEN */
#define I2C_MSG_RW_MASK BIT(0)
/** @endcond */
/** Send STOP after this message. */
#define I2C_MSG_STOP BIT(1)
/** RESTART I2C transaction for this message.
*
* @note Not all I2C drivers have or require explicit support for this
* feature. Some drivers require this be present on a read message
* that follows a write, or vice-versa. Some drivers will merge
* adjacent fragments into a single transaction using this flag; some
* will not. */
#define I2C_MSG_RESTART BIT(2)
/** Use 10-bit addressing for this message.
*
* @note Not all SoC I2C implementations support this feature. */
#define I2C_MSG_ADDR_10_BITS BIT(3)
/**
* @brief One I2C Message.
*
* This defines one I2C message to transact on the I2C bus.
*
* @note Some of the configurations supported by this API may not be
* supported by specific SoC I2C hardware implementations, in
* particular features related to bus transactions intended to read or
* write data from different buffers within a single transaction.
* Invocations of i2c_transfer() may not indicate an error when an
* unsupported configuration is encountered. In some cases drivers
* will generate separate transactions for each message fragment, with
* or without presence of @ref I2C_MSG_RESTART in #flags.
*/
struct i2c_msg {
/** Data buffer in bytes */
u8_t *buf;
/** Length of buffer in bytes */
u32_t len;
/** Flags for this message */
u8_t flags;
};
/**
* @cond INTERNAL_HIDDEN
*
* These are for internal use only, so skip these in
* public documentation.
*/
struct i2c_slave_config;
typedef int (*i2c_slave_write_requested_cb_t)(
struct i2c_slave_config *config);
typedef int (*i2c_slave_read_requested_cb_t)(
struct i2c_slave_config *config, u8_t *val);
typedef int (*i2c_slave_write_received_cb_t)(
struct i2c_slave_config *config, u8_t val);
typedef int (*i2c_slave_read_processed_cb_t)(
struct i2c_slave_config *config, u8_t *val);
typedef int (*i2c_slave_stop_cb_t)(struct i2c_slave_config *config);
struct i2c_slave_callbacks {
/** callback function being called when write is requested */
i2c_slave_write_requested_cb_t write_requested;
/** callback function being called when read is requested */
i2c_slave_read_requested_cb_t read_requested;
/** callback function being called when byte has been received */
i2c_slave_write_received_cb_t write_received;
/** callback function being called when byte has been sent */
i2c_slave_read_processed_cb_t read_processed;
/** callback function being called when stop occurs on the bus */
i2c_slave_stop_cb_t stop;
};
struct i2c_slave_config {
/** Private, do not modify */
sys_snode_t node;
/** Flags for the slave device defined by I2C_SLAVE_FLAGS_* constants */
u8_t flags;
/** Address for this slave device */
u16_t address;
/** Callback functions */
const struct i2c_slave_callbacks *callbacks;
};
typedef int (*i2c_api_configure_t)(struct device *dev,
u32_t dev_config);
typedef int (*i2c_api_full_io_t)(struct device *dev,
struct i2c_msg *msgs,
u8_t num_msgs,
u16_t addr);
typedef int (*i2c_api_slave_register_t)(struct device *dev,
struct i2c_slave_config *cfg);
typedef int (*i2c_api_slave_unregister_t)(struct device *dev,
struct i2c_slave_config *cfg);
struct i2c_driver_api {
i2c_api_configure_t configure;
i2c_api_full_io_t transfer;
i2c_api_slave_register_t slave_register;
i2c_api_slave_unregister_t slave_unregister;
};
typedef int (*i2c_slave_api_register_t)(struct device *dev);
typedef int (*i2c_slave_api_unregister_t)(struct device *dev);
struct i2c_slave_driver_api {
i2c_slave_api_register_t driver_register;
i2c_slave_api_unregister_t driver_unregister;
};
/**
* @endcond
*/
/**
* @brief Configure operation of a host controller.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_config Bit-packed 32-bit value to the device runtime configuration
* for the I2C controller.
*
* @retval 0 If successful.
* @retval -EIO General input / output error, failed to configure device.
*/
__syscall int i2c_configure(struct device *dev, u32_t dev_config);
static inline int z_impl_i2c_configure(struct device *dev, u32_t dev_config)
{
const struct i2c_driver_api *api =
(const struct i2c_driver_api *)dev->driver_api;
return api->configure(dev, dev_config);
}
/**
* @brief Perform data transfer to another I2C device.
*
* This routine provides a generic interface to perform data transfer
* to another I2C device synchronously. Use i2c_read()/i2c_write()
* for simple read or write.
*
* The array of message @a msgs must not be NULL. The number of
* message @a num_msgs may be zero,in which case no transfer occurs.
*
* @note Not all scatter/gather transactions can be supported by all
* drivers. As an example, a gather write (multiple consecutive
* `i2c_msg` buffers all configured for `I2C_MSG_WRITE`) may be packed
* into a single transaction by some drivers, but others may emit each
* fragment as a distinct write transaction, which will not produce
* the same behavior. See the documentation of `struct i2c_msg` for
* limitations on support for multi-message bus transactions.
*
* @param dev Pointer to the device structure for the driver instance.
* @param msgs Array of messages to transfer.
* @param num_msgs Number of messages to transfer.
* @param addr Address of the I2C target device.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
__syscall int i2c_transfer(struct device *dev,
struct i2c_msg *msgs, u8_t num_msgs,
u16_t addr);
static inline int z_impl_i2c_transfer(struct device *dev,
struct i2c_msg *msgs, u8_t num_msgs,
u16_t addr)
{
const struct i2c_driver_api *api =
(const struct i2c_driver_api *)dev->driver_api;
return api->transfer(dev, msgs, num_msgs, addr);
}
/**
* @brief Registers the provided config as Slave device
*
* Enable I2C slave mode for the 'dev' I2C bus driver using the provided
* 'config' struct containing the functions and parameters to send bus
* events. The I2C slave will be registered at the address provided as 'address'
* struct member. Addressing mode - 7 or 10 bit - depends on the 'flags'
* struct member. Any I2C bus events related to the slave mode will be passed
* onto I2C slave device driver via a set of callback functions provided in
* the 'callbacks' struct member.
*
* Most of the existing hardware allows simultaneous support for master
* and slave mode. This is however not guaranteed.
*
* @param dev Pointer to the device structure for the driver instance.
* @param cfg Config struct with functions and parameters used by the I2C driver
* to send bus events
*
* @retval 0 Is successful
* @retval -EINVAL If parameters are invalid
* @retval -EIO General input / output error.
* @retval -ENOTSUP If slave mode is not supported
*/
__syscall int i2c_slave_register(struct device *dev,
struct i2c_slave_config *cfg);
static inline int z_impl_i2c_slave_register(struct device *dev,
struct i2c_slave_config *cfg)
{
const struct i2c_driver_api *api =
(const struct i2c_driver_api *)dev->driver_api;
if (api->slave_register == NULL) {
return -ENOTSUP;
}
return api->slave_register(dev, cfg);
}
/**
* @brief Unregisters the provided config as Slave device
*
* This routine disables I2C slave mode for the 'dev' I2C bus driver using
* the provided 'config' struct containing the functions and parameters
* to send bus events.
*
* @param dev Pointer to the device structure for the driver instance.
* @param cfg Config struct with functions and parameters used by the I2C driver
* to send bus events
*
* @retval 0 Is successful
* @retval -EINVAL If parameters are invalid
* @retval -ENOTSUP If slave mode is not supported
*/
__syscall int i2c_slave_unregister(struct device *dev,
struct i2c_slave_config *cfg);
static inline int z_impl_i2c_slave_unregister(struct device *dev,
struct i2c_slave_config *cfg)
{
const struct i2c_driver_api *api =
(const struct i2c_driver_api *)dev->driver_api;
if (api->slave_unregister == NULL) {
return -ENOTSUP;
}
return api->slave_unregister(dev, cfg);
}
/**
* @brief Instructs the I2C Slave device to register itself to the I2C Controller
*
* This routine instructs the I2C Slave device to register itself to the I2C
* Controller.
*
* @param dev Pointer to the device structure for the driver instance.
*
* @retval 0 Is successful
* @retval -EINVAL If parameters are invalid
* @retval -EIO General input / output error.
*/
__syscall int i2c_slave_driver_register(struct device *dev);
static inline int z_impl_i2c_slave_driver_register(struct device *dev)
{
const struct i2c_slave_driver_api *api =
(const struct i2c_slave_driver_api *)dev->driver_api;
return api->driver_register(dev);
}
/**
* @brief Instructs the I2C Slave device to unregister itself from the I2C
* Controller
*
* This routine instructs the I2C Slave device to unregister itself from the I2C
* Controller.
*
* @param dev Pointer to the device structure for the driver instance.
*
* @retval 0 Is successful
* @retval -EINVAL If parameters are invalid
*/
__syscall int i2c_slave_driver_unregister(struct device *dev);
static inline int z_impl_i2c_slave_driver_unregister(struct device *dev)
{
const struct i2c_slave_driver_api *api =
(const struct i2c_slave_driver_api *)dev->driver_api;
return api->driver_unregister(dev);
}
/*
* Derived i2c APIs -- all implemented in terms of i2c_transfer()
*/
/**
* @brief Write a set amount of data to an I2C device.
*
* This routine writes a set amount of data synchronously.
*
* @param dev Pointer to the device structure for the driver instance.
* @param buf Memory pool from which the data is transferred.
* @param num_bytes Number of bytes to write.
* @param addr Address to the target I2C device for writing.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_write(struct device *dev, const u8_t *buf,
u32_t num_bytes, u16_t addr)
{
struct i2c_msg msg;
msg.buf = (u8_t *)buf;
msg.len = num_bytes;
msg.flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, &msg, 1, addr);
}
/**
* @brief Read a set amount of data from an I2C device.
*
* This routine reads a set amount of data synchronously.
*
* @param dev Pointer to the device structure for the driver instance.
* @param buf Memory pool that stores the retrieved data.
* @param num_bytes Number of bytes to read.
* @param addr Address of the I2C device being read.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_read(struct device *dev, u8_t *buf,
u32_t num_bytes, u16_t addr)
{
struct i2c_msg msg;
msg.buf = buf;
msg.len = num_bytes;
msg.flags = I2C_MSG_READ | I2C_MSG_STOP;
return i2c_transfer(dev, &msg, 1, addr);
}
/**
* @brief Write then read data from an I2C device.
*
* This supports the common operation "this is what I want", "now give
* it to me" transaction pair through a combined write-then-read bus
* transaction.
*
* @param dev Pointer to the device structure for the driver instance
* @param addr Address of the I2C device
* @param write_buf Pointer to the data to be written
* @param num_write Number of bytes to write
* @param read_buf Pointer to storage for read data
* @param num_read Number of bytes to read
*
* @retval 0 if successful
* @retval negative on error.
*/
static inline int i2c_write_read(struct device *dev, u16_t addr,
const void *write_buf, size_t num_write,
void *read_buf, size_t num_read)
{
struct i2c_msg msg[2];
msg[0].buf = (u8_t *)write_buf;
msg[0].len = num_write;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = (u8_t *)read_buf;
msg[1].len = num_read;
msg[1].flags = I2C_MSG_RESTART | I2C_MSG_READ | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, addr);
}
/**
* @brief Read multiple bytes from an internal address of an I2C device.
*
* This routine reads multiple bytes from an internal address of an
* I2C device synchronously.
*
* Instances of this may be replaced by i2c_write_read().
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for reading.
* @param start_addr Internal address from which the data is being read.
* @param buf Memory pool that stores the retrieved data.
* @param num_bytes Number of bytes being read.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_burst_read(struct device *dev,
u16_t dev_addr,
u8_t start_addr,
u8_t *buf,
u32_t num_bytes)
{
return i2c_write_read(dev, dev_addr,
&start_addr, sizeof(start_addr),
buf, num_bytes);
}
/**
* @brief Write multiple bytes to an internal address of an I2C device.
*
* This routine writes multiple bytes to an internal address of an
* I2C device synchronously.
*
* @warning The combined write synthesized by this API may not be
* supported on all I2C devices. Uses of this API may be made more
* portable by replacing them with calls to i2c_write() passing a
* buffer containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for writing.
* @param start_addr Internal address to which the data is being written.
* @param buf Memory pool from which the data is transferred.
* @param num_bytes Number of bytes being written.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_burst_write(struct device *dev,
u16_t dev_addr,
u8_t start_addr,
const u8_t *buf,
u32_t num_bytes)
{
struct i2c_msg msg[2];
msg[0].buf = &start_addr;
msg[0].len = 1;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = (u8_t *)buf;
msg[1].len = num_bytes;
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
/**
* @brief Read internal register of an I2C device.
*
* This routine reads the value of an 8-bit internal register of an I2C
* device synchronously.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for reading.
* @param reg_addr Address of the internal register being read.
* @param value Memory pool that stores the retrieved register value.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_reg_read_byte(struct device *dev, u16_t dev_addr,
u8_t reg_addr, u8_t *value)
{
return i2c_write_read(dev, dev_addr,
&reg_addr, sizeof(reg_addr),
value, sizeof(*value));
}
/**
* @brief Write internal register of an I2C device.
*
* This routine writes a value to an 8-bit internal register of an I2C
* device synchronously.
*
* @note This function internally combines the register and value into
* a single bus transaction.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for writing.
* @param reg_addr Address of the internal register being written.
* @param value Value to be written to internal register.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_reg_write_byte(struct device *dev, u16_t dev_addr,
u8_t reg_addr, u8_t value)
{
u8_t tx_buf[2] = {reg_addr, value};
return i2c_write(dev, tx_buf, 2, dev_addr);
}
/**
* @brief Update internal register of an I2C device.
*
* This routine updates the value of a set of bits from an 8-bit internal
* register of an I2C device synchronously.
*
* @note If the calculated new register value matches the value that
* was read this function will not generate a write operation.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for updating.
* @param reg_addr Address of the internal register being updated.
* @param mask Bitmask for updating internal register.
* @param value Value for updating internal register.
*
* @retval 0 If successful.
* @retval -EIO General input / output error.
*/
static inline int i2c_reg_update_byte(struct device *dev, u8_t dev_addr,
u8_t reg_addr, u8_t mask,
u8_t value)
{
u8_t old_value, new_value;
int rc;
rc = i2c_reg_read_byte(dev, dev_addr, reg_addr, &old_value);
if (rc != 0) {
return rc;
}
new_value = (old_value & ~mask) | (value & mask);
if (new_value == old_value) {
return 0;
}
return i2c_reg_write_byte(dev, dev_addr, reg_addr, new_value);
}
/**
* @brief Read multiple bytes from an internal 16 bit address of an I2C device.
*
* This routine reads multiple bytes from a 16 bit internal address of an
* I2C device synchronously.
*
* @deprecated Replace with i2c_write_read().
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for reading
* @param start_addr Internal 16 bit address from which the data is
* being read. Target device will receive this in big-endian byte
* order.
* @param buf Memory pool that stores the retrieved data.
* @param num_bytes Number of bytes being read.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_burst_read16(struct device *dev,
u16_t dev_addr,
u16_t start_addr,
u8_t *buf,
u32_t num_bytes)
{
u8_t addr_buffer[2];
addr_buffer[1] = start_addr & 0xFF;
addr_buffer[0] = start_addr >> 8;
return i2c_write_read(dev, dev_addr,
addr_buffer, sizeof(addr_buffer),
buf, num_bytes);
}
/**
* @brief Write multiple bytes to a 16 bit internal address of an I2C device.
*
* This routine writes multiple bytes to a 16 bit internal address of an
* I2C device synchronously.
*
* @deprecated The combined write synthesized by this API may not be
* supported on all I2C devices. Replace this with a single call to
* i2c_write() with a buffer containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for writing.
* @param start_addr Internal 16 bit address from which the data is
* being written. Target device will receive this in big-endian byte
* order.
* @param buf Memory pool from which the data is transferred.
* @param num_bytes Number of bytes being written.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_burst_write16(struct device *dev,
u16_t dev_addr,
u16_t start_addr,
const u8_t *buf,
u32_t num_bytes)
{
u8_t addr_buffer[2];
struct i2c_msg msg[2];
addr_buffer[1] = start_addr & 0xFF;
addr_buffer[0] = start_addr >> 8;
msg[0].buf = addr_buffer;
msg[0].len = 2;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = (u8_t *)buf;
msg[1].len = num_bytes;
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
/**
* @brief Read internal 16 bit address register of an I2C device.
*
* This routine reads the 8-bit value of internal register identified
* by a 16-bit register address synchronously.
*
* @deprecated Replace with i2c_write_read().
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for reading.
* @param reg_addr 16 bit address of the internal register being read.
* @param value Memory pool that stores the retrieved register value.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_reg_read16(struct device *dev,
u16_t dev_addr,
u16_t reg_addr,
u8_t *value)
{
u8_t addr_buffer[2];
addr_buffer[1] = reg_addr & 0xFFU;
addr_buffer[0] = reg_addr >> 8U;
return i2c_write_read(dev, dev_addr,
addr_buffer, sizeof(addr_buffer),
value, sizeof(*value));
}
/**
* @brief Write internal 16 bit address register of an I2C device.
*
* This routine writes a value to an 16-bit internal register of an I2C
* device synchronously.
*
* @deprecated The combined write synthesized by this API may not be
* supported on all I2C devices. Replace this with a single call to
* i2c_write() with a buffer containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for writing.
* @param reg_addr 16 bit address of the internal register being written.
* @param value Value to be written to internal register.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_reg_write16(struct device *dev,
u16_t dev_addr,
u16_t reg_addr,
u8_t value)
{
u8_t addr_buffer[2];
struct i2c_msg msg[2];
addr_buffer[1] = reg_addr & 0xFFU;
addr_buffer[0] = reg_addr >> 8U;
msg[0].buf = addr_buffer;
msg[0].len = 2UL;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = (u8_t *)&value;
msg[1].len = sizeof(value);
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
/**
* @brief Update internal 16 bit address register of an I2C device.
*
* This routine updates the value of a set of bits from a 16-bit internal
* register of an I2C device synchronously.
*
* @note If the calculated new register value matches the value that
* was read this function will not generate a write operation.
*
* @deprecated The combined write synthesized by this API may not be
* supported on all I2C devices. Replace this with a call to
* i2c_write_read() followed by value manipulation, then a call to
* i2c_write() with a buffer containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for updating.
* @param reg_addr 16 bit address of the internal register being updated.
* @param mask Bitmask for updating internal register.
* @param value Value for updating internal register.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_reg_update16(struct device *dev,
u16_t dev_addr,
u16_t reg_addr,
u8_t mask,
u8_t value)
{
u8_t addr_buffer[2];
struct i2c_msg msg[2];
u8_t old_value, new_value;
int rc;
addr_buffer[1] = reg_addr & 0xFFU;
addr_buffer[0] = reg_addr >> 8U;
rc = i2c_write_read(dev, dev_addr,
addr_buffer, sizeof(addr_buffer),
&old_value, sizeof(old_value));
if (rc != 0) {
return rc;
}
new_value = (old_value & ~mask) | (value & mask);
if (new_value == old_value) {
return 0;
}
msg[0].buf = addr_buffer;
msg[0].len = 2UL;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = &new_value;
msg[1].len = sizeof(new_value);
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
/**
* @brief Read multiple bytes from an internal variable byte size
* address of an I2C device.
*
* This routine reads multiple bytes from an addr_size byte internal
* address of an I2C device synchronously.
*
* @deprecated Replace with i2c_write_read().
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for reading.
* @param start_addr Array to an internal register address from which
* the data is being read.
* @param addr_size Size in bytes of the register address.
* @param buf Memory pool that stores the retrieved data.
* @param num_bytes Number of bytes being read.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_burst_read_addr(struct device *dev,
u16_t dev_addr,
const u8_t *start_addr,
const u8_t addr_size,
u8_t *buf,
u32_t num_bytes)
{
return i2c_write_read(dev, dev_addr, start_addr, addr_size,
buf, num_bytes);
}
/**
* @brief Write multiple bytes to an internal variable bytes size
* address of an I2C device.
* This routine writes multiple bytes to an addr_size byte internal
* address of an I2C device synchronously.
*
* @deprecated The combined write synthesized by this API may not be
* supported on all I2C devices. Replace this with a single call to
* i2c_write() with a buffer containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for writing.
* @param start_addr Array to an internal register address from which
* the data is being read.
* @param addr_size Size in bytes of the register address.
* @param buf Memory pool from which the data is transferred.
* @param num_bytes Number of bytes being written.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_burst_write_addr(struct device *dev,
u16_t dev_addr,
const u8_t *start_addr,
const u8_t addr_size,
const u8_t *buf,
u32_t num_bytes)
{
struct i2c_msg msg[2];
msg[0].buf = (u8_t *)start_addr;
msg[0].len = addr_size;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = (u8_t *)buf;
msg[1].len = num_bytes;
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
/**
* @brief Read internal variable byte size address register
* of an I2C device.
*
* This routine reads the value of an addr_size byte internal register
* of an I2C device synchronously.
*
* @deprecated Replace with i2c_write_read().
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for reading.
* @param reg_addr Array to an internal register address from which
* the data is being read.
* @param addr_size Size in bytes of the register address.
* @param value Memory pool that stores the retrieved register value.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_reg_read_addr(struct device *dev,
u16_t dev_addr,
const u8_t *reg_addr,
u8_t addr_size,
u8_t *value)
{
return i2c_write_read(dev, dev_addr, reg_addr, addr_size,
value, sizeof(*value));
}
/**
* @brief Write internal variable byte size address register
* of an I2C device.
*
* This routine writes a value to an addr_size byte internal register
* of an I2C device synchronously.
*
* @deprecated The combined write synthesized by this API may not be
* supported on all I2C devices. Replace this with a single call to
* i2c_write() with a buffer containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for writing.
* @param reg_addr Array to an internal register address from which
* the data is being read.
* @param addr_size Size in bytes of the register address.
* @param value Value to be written to internal register.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_reg_write_addr(struct device *dev,
u16_t dev_addr,
const u8_t *reg_addr,
const u8_t addr_size,
u8_t value)
{
struct i2c_msg msg[2];
msg[0].buf = (u8_t *)reg_addr;
msg[0].len = addr_size;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = &value;
msg[1].len = sizeof(value);
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
/**
* @brief Update internal variable byte size address register
* of an I2C device.
*
* This routine updates the value of a set of bits from a addr_size byte
* internal register of an I2C device synchronously.
*
* @note If the calculated new register value matches the value that
* was read this function will not generate a write operation.
*
* @deprecated The combined write synthesized by this API may not be
* supported on all I2C devices. Replace this with a call to
* i2c_read() followed by a call to i2c_write() with a buffer
* containing the combined address and data.
*
* @param dev Pointer to the device structure for the driver instance.
* @param dev_addr Address of the I2C device for updating.
* @param reg_addr Array to an internal register address from which
* the data is being read.
* @param addr_size Size in bytes of the register address.
* @param mask Bitmask for updating internal register.
* @param value Value for updating internal register.
*
* @retval 0 If successful.
* @retval Negative errno code if failure.
*/
__deprecated static inline int i2c_reg_update_addr(struct device *dev,
u16_t dev_addr,
const u8_t *reg_addr,
u8_t addr_size,
u8_t mask,
u8_t value)
{
struct i2c_msg msg[2];
u8_t old_value, new_value;
int rc;
rc = i2c_write_read(dev, dev_addr, reg_addr, addr_size,
&old_value, sizeof(old_value));
if (rc != 0) {
return rc;
}
new_value = (old_value & ~mask) | (value & mask);
if (new_value == old_value) {
return 0;
}
msg[0].buf = (u8_t *)reg_addr;
msg[0].len = addr_size;
msg[0].flags = I2C_MSG_WRITE;
msg[1].buf = &new_value;
msg[1].len = sizeof(new_value);
msg[1].flags = I2C_MSG_WRITE | I2C_MSG_STOP;
return i2c_transfer(dev, msg, 2, dev_addr);
}
struct i2c_client_config {
char *i2c_master;
u16_t i2c_addr;
};
#define I2C_DECLARE_CLIENT_CONFIG struct i2c_client_config i2c_client
#define I2C_CLIENT(_master, _addr) \
.i2c_client = { \
.i2c_master = (_master), \
.i2c_addr = (_addr), \
}
#define I2C_GET_MASTER(_conf) ((_conf)->i2c_client.i2c_master)
#define I2C_GET_ADDR(_conf) ((_conf)->i2c_client.i2c_addr)
#ifdef __cplusplus
}
#endif
/**
* @}
*/
#include <syscalls/i2c.h>
#endif /* ZEPHYR_INCLUDE_I2C_H_ */