boards/panasonic/panb511evb/panb511evb_nrf54l15_common.dtsi

/*
 * Copyright (c) 2025 Panasonic Industrial Devices Europe GmbH
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include "panb511evb_nrf54l15-pinctrl.dtsi"

/ {
	leds {
		compatible = "gpio-leds";

		evb_led1: evb_led_1 {
			gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
			label = "LED1 on EVB";
		};

		evb_led2: evb_led_2 {
			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
			label = "LED2 on EVB";
		};

		evb_led3: evb_led_3 {
			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
			label = "LED3 on EVB";
		};

		evb_led4: evb_led_4 {
			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
			label = "LED4 on EVB";
		};
	};

	pwmleds {
		compatible = "pwm-leds";

		/*
		 * PWM signal can be exposed on GPIO pin only within same domain.
		 * There is only one domain which contains both PWM and GPIO:
		 * PWM20/21/22 and GPIO Port P1.
		 * Only LEDs connected to P1 can work with PWM, for example LED1.
		 */
		pwm_evb_led1: pwm_evb_led_1 {
			pwms = <&pwm20 0 PWM_MSEC(20) PWM_POLARITY_NORMAL>;
		};
	};

	buttons {
		compatible = "gpio-keys";

		evb_sw1: evb_sw_1 {
			gpios = <&gpio1 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "SW1 on EVB";
			zephyr,code = <INPUT_KEY_0>;
		};

		evb_sw2: evb_sw_2 {
			gpios = <&gpio1 12 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "SW2 on EVB";
			zephyr,code = <INPUT_KEY_1>;
		};

		evb_sw3: evb_sw_3 {
			gpios = <&gpio1 13 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "SW3 on EVB";
			zephyr,code = <INPUT_KEY_2>;
		};

		evb_sw4: evb_sw_4 {
			gpios = <&gpio1 14 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "SW4 on EVB";
			zephyr,code = <INPUT_KEY_3>;
		};
	};

	mikrobus_header: mikrobus-connector {
		compatible = "mikro-bus";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <0 0 &gpio1 6 0>,	/* AN */
			/* Not a GPIO*/		/* RST */
			<2 0 &gpio2 10 0>,	/* CS */
			<3 0 &gpio2 6 0>,	/* SCK */
			<4 0 &gpio2 9 0>,	/* MISO */
			<5 0 &gpio2 8 0>,	/* MOSI */
			/* +3.3V */
			/* GND */
			<6 0 &gpio1 15 0>,	/* PWM */
			<7 0 &gpio2 7 0>,	/* INT */
			<8 0 &gpio1 5 0>,	/* RX */
			<9 0 &gpio1 4 0>,	/* TX */
			<10 0 &gpio1 8 0>,	/* SCL */
			<11 0 &gpio1 9 0>;	/* SDA */
			/* +5V */
			/* GND */
	};

	arduino_header: connector {
		compatible = "arduino-header-r3";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <0 0 &gpio1 6 0>, /* A0 */
			<1 0 &gpio1 7 0>, /* A1 */
			<2 0 &gpio1 11 0>, /* A2 */
			<3 0 &gpio1 12 0>, /* A3 */
			<4 0 &gpio1 13 0>, /* A4 */
			<5 0 &gpio1 14 0>, /* A5 */
			<6 0 &gpio1 4 0>, /* D0 */
			<7 0 &gpio1 5 0>, /* D1 */
			<8 0 &gpio0 0 0>, /* D2 */
			<9 0 &gpio1 2 0>, /* D3 */
			<10 0 &gpio1 3 0>, /* D4 */
			<11 0 &gpio1 10 0>, /* D5 */
			<12 0 &gpio1 13 0>, /* D6 */
			<13 0 &gpio1 14 0>, /* D7 */
			<14 0 &gpio1 15 0>, /* D8 */
			<15 0 &gpio2 7 0>, /* D9 */
			<16 0 &gpio2 10 0>, /* D10 */
			<17 0 &gpio2 8 0>, /* D11 */
			<18 0 &gpio2 9 0>, /* D12 */
			<19 0 &gpio2 6 0>, /* D13 */
			<20 0 &gpio1 9 0>, /* D14 */
			<21 0 &gpio1 8 0>; /* D15 */
	};

	arduino_adc: analog-connector {
		compatible = "arduino,uno-adc";
		#io-channel-cells = <1>;
		io-channel-map = <0 &adc 0>,	/* A0 = P1.06 = AIN0 */
			<1 &adc 1>,	/* A1 = P1.07 = AIN1 */
			<2 &adc 2>,	/* A2 = P1.11 = AIN2 */
			<3 &adc 3>,	/* A3 = P1.12 = AIN3 */
			<4 &adc 4>,	/* A4 = P1.13 = AIN4 */
			<5 &adc 5>;	/* A5 = P1.14 = AIN5 */
	};

	aliases {
		led0 = &evb_led1;
		led1 = &evb_led2;
		led2 = &evb_led3;
		led3 = &evb_led4;
		pwm-led0 = &pwm_evb_led1;
		sw0 = &evb_sw1;
		sw1 = &evb_sw2;
		sw2 = &evb_sw3;
		sw3 = &evb_sw4;
		watchdog0 = &wdt31;
	};
};

&uart20 {
	current-speed = <115200>;
	pinctrl-0 = <&uart20_default>;
	pinctrl-1 = <&uart20_sleep>;
	pinctrl-names = "default", "sleep";
};

&uart30 {
	current-speed = <115200>;
	pinctrl-0 = <&uart30_default>;
	pinctrl-1 = <&uart30_sleep>;
	pinctrl-names = "default", "sleep";
};

&pwm20 {
	status = "okay";
	pinctrl-0 = <&pwm20_default>;
	pinctrl-1 = <&pwm20_sleep>;
	pinctrl-names = "default", "sleep";
};