| /* |
| * Copyright (c) 2018 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <zephyr/spinlock.h> |
| #include <ksched.h> |
| #include <timeout_q.h> |
| #include <zephyr/internal/syscall_handler.h> |
| #include <zephyr/drivers/timer/system_timer.h> |
| #include <zephyr/sys_clock.h> |
| |
| static uint64_t curr_tick; |
| |
| static sys_dlist_t timeout_list = SYS_DLIST_STATIC_INIT(&timeout_list); |
| |
| static struct k_spinlock timeout_lock; |
| |
| #define MAX_WAIT (IS_ENABLED(CONFIG_SYSTEM_CLOCK_SLOPPY_IDLE) \ |
| ? K_TICKS_FOREVER : INT_MAX) |
| |
| /* Ticks left to process in the currently-executing sys_clock_announce() */ |
| static int announce_remaining; |
| |
| #if defined(CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME) |
| int z_clock_hw_cycles_per_sec = CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC; |
| |
| #ifdef CONFIG_USERSPACE |
| static inline int z_vrfy_sys_clock_hw_cycles_per_sec_runtime_get(void) |
| { |
| return z_impl_sys_clock_hw_cycles_per_sec_runtime_get(); |
| } |
| #include <zephyr/syscalls/sys_clock_hw_cycles_per_sec_runtime_get_mrsh.c> |
| #endif /* CONFIG_USERSPACE */ |
| #endif /* CONFIG_TIMER_READS_ITS_FREQUENCY_AT_RUNTIME */ |
| |
| static struct _timeout *first(void) |
| { |
| sys_dnode_t *t = sys_dlist_peek_head(&timeout_list); |
| |
| return (t == NULL) ? NULL : CONTAINER_OF(t, struct _timeout, node); |
| } |
| |
| static struct _timeout *next(struct _timeout *t) |
| { |
| sys_dnode_t *n = sys_dlist_peek_next(&timeout_list, &t->node); |
| |
| return (n == NULL) ? NULL : CONTAINER_OF(n, struct _timeout, node); |
| } |
| |
| static void remove_timeout(struct _timeout *t) |
| { |
| if (next(t) != NULL) { |
| next(t)->dticks += t->dticks; |
| } |
| |
| sys_dlist_remove(&t->node); |
| } |
| |
| static int32_t elapsed(void) |
| { |
| /* While sys_clock_announce() is executing, new relative timeouts will be |
| * scheduled relatively to the currently firing timeout's original tick |
| * value (=curr_tick) rather than relative to the current |
| * sys_clock_elapsed(). |
| * |
| * This means that timeouts being scheduled from within timeout callbacks |
| * will be scheduled at well-defined offsets from the currently firing |
| * timeout. |
| * |
| * As a side effect, the same will happen if an ISR with higher priority |
| * preempts a timeout callback and schedules a timeout. |
| * |
| * The distinction is implemented by looking at announce_remaining which |
| * will be non-zero while sys_clock_announce() is executing and zero |
| * otherwise. |
| */ |
| return announce_remaining == 0 ? sys_clock_elapsed() : 0U; |
| } |
| |
| static int32_t next_timeout(void) |
| { |
| struct _timeout *to = first(); |
| int32_t ticks_elapsed = elapsed(); |
| int32_t ret; |
| |
| if ((to == NULL) || |
| ((int64_t)(to->dticks - ticks_elapsed) > (int64_t)INT_MAX)) { |
| ret = MAX_WAIT; |
| } else { |
| ret = MAX(0, to->dticks - ticks_elapsed); |
| } |
| |
| return ret; |
| } |
| |
| void z_add_timeout(struct _timeout *to, _timeout_func_t fn, |
| k_timeout_t timeout) |
| { |
| if (K_TIMEOUT_EQ(timeout, K_FOREVER)) { |
| return; |
| } |
| |
| #ifdef CONFIG_KERNEL_COHERENCE |
| __ASSERT_NO_MSG(arch_mem_coherent(to)); |
| #endif /* CONFIG_KERNEL_COHERENCE */ |
| |
| __ASSERT(!sys_dnode_is_linked(&to->node), ""); |
| to->fn = fn; |
| |
| K_SPINLOCK(&timeout_lock) { |
| struct _timeout *t; |
| |
| if (IS_ENABLED(CONFIG_TIMEOUT_64BIT) && |
| (Z_TICK_ABS(timeout.ticks) >= 0)) { |
| k_ticks_t ticks = Z_TICK_ABS(timeout.ticks) - curr_tick; |
| |
| to->dticks = MAX(1, ticks); |
| } else { |
| to->dticks = timeout.ticks + 1 + elapsed(); |
| } |
| |
| for (t = first(); t != NULL; t = next(t)) { |
| if (t->dticks > to->dticks) { |
| t->dticks -= to->dticks; |
| sys_dlist_insert(&t->node, &to->node); |
| break; |
| } |
| to->dticks -= t->dticks; |
| } |
| |
| if (t == NULL) { |
| sys_dlist_append(&timeout_list, &to->node); |
| } |
| |
| if (to == first() && announce_remaining == 0) { |
| sys_clock_set_timeout(next_timeout(), false); |
| } |
| } |
| } |
| |
| int z_abort_timeout(struct _timeout *to) |
| { |
| int ret = -EINVAL; |
| |
| K_SPINLOCK(&timeout_lock) { |
| if (sys_dnode_is_linked(&to->node)) { |
| remove_timeout(to); |
| ret = 0; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* must be locked */ |
| static k_ticks_t timeout_rem(const struct _timeout *timeout) |
| { |
| k_ticks_t ticks = 0; |
| |
| for (struct _timeout *t = first(); t != NULL; t = next(t)) { |
| ticks += t->dticks; |
| if (timeout == t) { |
| break; |
| } |
| } |
| |
| return ticks; |
| } |
| |
| k_ticks_t z_timeout_remaining(const struct _timeout *timeout) |
| { |
| k_ticks_t ticks = 0; |
| |
| K_SPINLOCK(&timeout_lock) { |
| if (!z_is_inactive_timeout(timeout)) { |
| ticks = timeout_rem(timeout) - elapsed(); |
| } |
| } |
| |
| return ticks; |
| } |
| |
| k_ticks_t z_timeout_expires(const struct _timeout *timeout) |
| { |
| k_ticks_t ticks = 0; |
| |
| K_SPINLOCK(&timeout_lock) { |
| ticks = curr_tick; |
| if (!z_is_inactive_timeout(timeout)) { |
| ticks += timeout_rem(timeout); |
| } |
| } |
| |
| return ticks; |
| } |
| |
| int32_t z_get_next_timeout_expiry(void) |
| { |
| int32_t ret = (int32_t) K_TICKS_FOREVER; |
| |
| K_SPINLOCK(&timeout_lock) { |
| ret = next_timeout(); |
| } |
| return ret; |
| } |
| |
| void sys_clock_announce(int32_t ticks) |
| { |
| k_spinlock_key_t key = k_spin_lock(&timeout_lock); |
| |
| /* We release the lock around the callbacks below, so on SMP |
| * systems someone might be already running the loop. Don't |
| * race (which will cause parallel execution of "sequential" |
| * timeouts and confuse apps), just increment the tick count |
| * and return. |
| */ |
| if (IS_ENABLED(CONFIG_SMP) && (announce_remaining != 0)) { |
| announce_remaining += ticks; |
| k_spin_unlock(&timeout_lock, key); |
| return; |
| } |
| |
| announce_remaining = ticks; |
| |
| struct _timeout *t; |
| |
| for (t = first(); |
| (t != NULL) && (t->dticks <= announce_remaining); |
| t = first()) { |
| int dt = t->dticks; |
| |
| curr_tick += dt; |
| t->dticks = 0; |
| remove_timeout(t); |
| |
| k_spin_unlock(&timeout_lock, key); |
| t->fn(t); |
| key = k_spin_lock(&timeout_lock); |
| announce_remaining -= dt; |
| } |
| |
| if (t != NULL) { |
| t->dticks -= announce_remaining; |
| } |
| |
| curr_tick += announce_remaining; |
| announce_remaining = 0; |
| |
| sys_clock_set_timeout(next_timeout(), false); |
| |
| k_spin_unlock(&timeout_lock, key); |
| |
| #ifdef CONFIG_TIMESLICING |
| z_time_slice(); |
| #endif /* CONFIG_TIMESLICING */ |
| } |
| |
| int64_t sys_clock_tick_get(void) |
| { |
| uint64_t t = 0U; |
| |
| K_SPINLOCK(&timeout_lock) { |
| t = curr_tick + elapsed(); |
| } |
| return t; |
| } |
| |
| uint32_t sys_clock_tick_get_32(void) |
| { |
| #ifdef CONFIG_TICKLESS_KERNEL |
| return (uint32_t)sys_clock_tick_get(); |
| #else |
| return (uint32_t)curr_tick; |
| #endif /* CONFIG_TICKLESS_KERNEL */ |
| } |
| |
| int64_t z_impl_k_uptime_ticks(void) |
| { |
| return sys_clock_tick_get(); |
| } |
| |
| #ifdef CONFIG_USERSPACE |
| static inline int64_t z_vrfy_k_uptime_ticks(void) |
| { |
| return z_impl_k_uptime_ticks(); |
| } |
| #include <zephyr/syscalls/k_uptime_ticks_mrsh.c> |
| #endif /* CONFIG_USERSPACE */ |
| |
| k_timepoint_t sys_timepoint_calc(k_timeout_t timeout) |
| { |
| k_timepoint_t timepoint; |
| |
| if (K_TIMEOUT_EQ(timeout, K_FOREVER)) { |
| timepoint.tick = UINT64_MAX; |
| } else if (K_TIMEOUT_EQ(timeout, K_NO_WAIT)) { |
| timepoint.tick = 0; |
| } else { |
| k_ticks_t dt = timeout.ticks; |
| |
| if (IS_ENABLED(CONFIG_TIMEOUT_64BIT) && Z_TICK_ABS(dt) >= 0) { |
| timepoint.tick = Z_TICK_ABS(dt); |
| } else { |
| timepoint.tick = sys_clock_tick_get() + MAX(1, dt); |
| } |
| } |
| |
| return timepoint; |
| } |
| |
| k_timeout_t sys_timepoint_timeout(k_timepoint_t timepoint) |
| { |
| uint64_t now, remaining; |
| |
| if (timepoint.tick == UINT64_MAX) { |
| return K_FOREVER; |
| } |
| if (timepoint.tick == 0) { |
| return K_NO_WAIT; |
| } |
| |
| now = sys_clock_tick_get(); |
| remaining = (timepoint.tick > now) ? (timepoint.tick - now) : 0; |
| return K_TICKS(remaining); |
| } |
| |
| #ifdef CONFIG_ZTEST |
| void z_impl_sys_clock_tick_set(uint64_t tick) |
| { |
| curr_tick = tick; |
| } |
| |
| void z_vrfy_sys_clock_tick_set(uint64_t tick) |
| { |
| z_impl_sys_clock_tick_set(tick); |
| } |
| #endif /* CONFIG_ZTEST */ |