| # Kconfig.atmel_sam3 - Atmel SAM3 GPIO configuration options |
| # |
| # |
| # Copyright (c) 2016 Intel Corporation |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| menuconfig GPIO_ATMEL_SAM3 |
| bool "Atmel SAM3 PIO Controllers" |
| depends on GPIO && SOC_ATMEL_SAM3 |
| default n |
| help |
| Enable config options to support the PIO controllers |
| on Atmel SAM3 family processors. |
| |
| Says n if not sure. |
| |
| if GPIO_ATMEL_SAM3 |
| |
| config GPIO_ATMEL_SAM3_PORTA |
| bool "Enable driver for Atmel SAM3 PIO Port A" |
| depends on GPIO_ATMEL_SAM3 |
| default n |
| help |
| Build the driver to utilize PIO controller Port A. |
| |
| config GPIO_ATMEL_SAM3_PORTA_DEV_NAME |
| string "Device name for Port A" |
| depends on GPIO_ATMEL_SAM3_PORTA |
| default "PIOA" |
| help |
| Device name for Port A. |
| |
| config GPIO_ATMEL_SAM3_PORTA_IRQ_PRI |
| int "Interrupt Priority for Port A" |
| depends on GPIO_ATMEL_SAM3_PORTA |
| default 3 |
| help |
| Interrupt priority for Port A. |
| |
| config GPIO_ATMEL_SAM3_PORTB |
| bool "Enable driver for Atmel SAM3 PIO Port B" |
| depends on GPIO_ATMEL_SAM3 |
| default n |
| help |
| Build the driver to utilize PIO controller Port B. |
| |
| config GPIO_ATMEL_SAM3_PORTB_DEV_NAME |
| string "Device name for Port B" |
| depends on GPIO_ATMEL_SAM3_PORTB |
| default "PIOB" |
| help |
| Device name for Port B. |
| |
| config GPIO_ATMEL_SAM3_PORTB_IRQ_PRI |
| int "Interrupt Priority for Port B" |
| depends on GPIO_ATMEL_SAM3_PORTB |
| default 3 |
| help |
| Interrupt priority for Port B. |
| |
| config GPIO_ATMEL_SAM3_PORTC |
| bool "Enable driver for Atmel SAM3 PIO Port C" |
| depends on GPIO_ATMEL_SAM3 |
| default n |
| help |
| Build the driver to utilize PIO controller Port C. |
| |
| config GPIO_ATMEL_SAM3_PORTC_DEV_NAME |
| string "Device name for Port C" |
| depends on GPIO_ATMEL_SAM3_PORTC |
| default "PIOC" |
| help |
| Device name for Port C. |
| |
| config GPIO_ATMEL_SAM3_PORTC_IRQ_PRI |
| int "Interrupt Priority for Port C" |
| depends on GPIO_ATMEL_SAM3_PORTC |
| default 3 |
| help |
| Interrupt priority for Port C. |
| |
| config GPIO_ATMEL_SAM3_PORTD |
| bool "Enable driver for Atmel SAM3 PIO Port D" |
| depends on GPIO_ATMEL_SAM3 |
| default n |
| help |
| Build the driver to utilize PIO controller Port D. |
| |
| config GPIO_ATMEL_SAM3_PORTD_DEV_NAME |
| string "Device name for Port D" |
| depends on GPIO_ATMEL_SAM3_PORTD |
| default "PIOD" |
| help |
| Device name for Port D. |
| |
| config GPIO_ATMEL_SAM3_PORTD_IRQ_PRI |
| int "Interrupt Priority for Port D" |
| depends on GPIO_ATMEL_SAM3_PORTD |
| default 3 |
| help |
| Interrupt priority for Port D. |
| |
| endif # GPIO_ATMEL_SAM3 |