blob: 34302fd95db8eec77ac1e5660d64694fb473324d [file] [log] [blame]
menuconfig UART_K20
bool "K20 serial driver"
default n
select SERIAL_HAS_DRIVER
help
This option enables the K20 serial driver.
This specific driver can be used for the serial hardware
available at the Freescale FRDM K64F board.
# ---------- Port 0 ----------
menuconfig UART_K20_PORT_0
bool "Enable K20 UART Port 0"
default n
depends on UART_K20
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_K20_PORT_0_NAME
string "Port 0 Device Name"
default "UART_0"
depends on UART_K20_PORT_0
help
This is the device name for UART, and is included in the device
struct.
config UART_K20_PORT_0_IRQ_PRI
int "Port 0 Interrupt Priority"
default 0
depends on UART_K20_PORT_0
help
The interrupt priority for UART port.
config UART_K20_PORT_0_BAUD_RATE
int "Port 0 Baud Rate"
default 0
depends on UART_K20_PORT_0
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 1 ----------
menuconfig UART_K20_PORT_1
bool "Enable K20 UART Port 1"
default n
depends on UART_K20
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_K20_PORT_1_NAME
string "Port 1 Device Name"
default "UART_1"
depends on UART_K20_PORT_1
help
This is the device name for UART, and is included in the device
struct.
config UART_K20_PORT_1_IRQ_PRI
int "Port 1 Interrupt Priority"
default 0
depends on UART_K20_PORT_1
help
The interrupt priority for UART port.
config UART_K20_PORT_1_BAUD_RATE
int "Port 1 Baud Rate"
default 0
depends on UART_K20_PORT_1
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 2 ----------
menuconfig UART_K20_PORT_2
bool "Enable K20 UART Port 2"
default n
depends on UART_K20
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_K20_PORT_2_NAME
string "Port 2 Device Name"
default "UART_2"
depends on UART_K20_PORT_2
help
This is the device name for UART, and is included in the device
struct.
config UART_K20_PORT_2_IRQ_PRI
int "Port 2 Interrupt Priority"
default 0
depends on UART_K20_PORT_2
help
The interrupt priority for UART port.
config UART_K20_PORT_2_BAUD_RATE
int "Port 2 Baud Rate"
default 0
depends on UART_K20_PORT_2
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 3 ----------
menuconfig UART_K20_PORT_3
bool "Enable K20 UART Port 3"
default n
depends on UART_K20
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_K20_PORT_3_NAME
string "Port 3 Device Name"
default "UART_3"
depends on UART_K20_PORT_3
help
This is the device name for UART, and is included in the device
struct.
config UART_K20_PORT_3_IRQ_PRI
int "Port 3 Interrupt Priority"
default 0
depends on UART_K20_PORT_3
help
The interrupt priority for UART port.
config UART_K20_PORT_3_BAUD_RATE
int "Port 3 Baud Rate"
default 0
depends on UART_K20_PORT_3
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.
# ---------- Port 4 ----------
menuconfig UART_K20_PORT_4
bool "Enable K20 UART Port 4"
default n
depends on UART_K20
help
This tells the driver to configure the UART port at boot, depending on
the additional configure options below.
config UART_K20_PORT_4_NAME
string "Port 4 Device Name"
default "UART_4"
depends on UART_K20_PORT_4
help
This is the device name for UART, and is included in the device
struct.
config UART_K20_PORT_4_IRQ_PRI
int "Port 4 Interrupt Priority"
default 0
depends on UART_K20_PORT_4
help
The interrupt priority for UART port.
config UART_K20_PORT_4_BAUD_RATE
int "Port 4 Baud Rate"
default 0
depends on UART_K20_PORT_4
help
The baud rate for UART port to be set to at boot.
Leave at 0 to skip initialization.