|  | /* | 
|  | * Copyright (c) 2018, Nordic Semiconductor ASA | 
|  | * | 
|  | * SPDX-License-Identifier: Apache-2.0 | 
|  | */ | 
|  |  | 
|  | #include <nrfx_wdt.h> | 
|  | #include <watchdog.h> | 
|  |  | 
|  | #define LOG_LEVEL CONFIG_WDT_LOG_LEVEL | 
|  | #include <logging/log.h> | 
|  | LOG_MODULE_REGISTER(wdt_nrfx); | 
|  |  | 
|  | DEVICE_DECLARE(wdt_nrfx); | 
|  |  | 
|  | /* Each activated and not reloaded channel can generate watchdog interrupt. | 
|  | * Array m_callbacks provides storing callbacks for each channel. | 
|  | */ | 
|  | static wdt_callback_t m_callbacks[NRF_WDT_CHANNEL_NUMBER]; | 
|  |  | 
|  | /* The m_allocated_channels variable stores number of currently allocated | 
|  | * and activated watchdog channels. | 
|  | */ | 
|  | static u8_t m_allocated_channels; | 
|  |  | 
|  | /* The m_timeout variable stores watchdog timeout value in millisecond units. | 
|  | * It is used to check whether installing watchdog provide the same timeout | 
|  | * value in the window configuration. | 
|  | */ | 
|  | static u32_t m_timeout; | 
|  |  | 
|  | static int wdt_nrf_setup(struct device *dev, u8_t options) | 
|  | { | 
|  | nrf_wdt_behaviour_t behaviour; | 
|  |  | 
|  | ARG_UNUSED(dev); | 
|  |  | 
|  | /* Activate all available options. Run in all cases. */ | 
|  | behaviour = NRF_WDT_BEHAVIOUR_RUN_SLEEP_HALT; | 
|  |  | 
|  | /* Deactivate running in sleep mode. */ | 
|  | if (options & WDT_OPT_PAUSE_IN_SLEEP) { | 
|  | behaviour &= ~NRF_WDT_BEHAVIOUR_RUN_SLEEP; | 
|  | } | 
|  |  | 
|  | /* Deactivate running when debugger is attached. */ | 
|  | if (options & WDT_OPT_PAUSE_HALTED_BY_DBG) { | 
|  | behaviour &= ~NRF_WDT_BEHAVIOUR_RUN_HALT; | 
|  | } | 
|  |  | 
|  | nrf_wdt_behaviour_set(behaviour); | 
|  | /* The watchdog timer is driven by the LFCLK clock running at 32768 Hz. | 
|  | * The timeout value given in milliseconds needs to be converted here | 
|  | * to watchdog ticks.*/ | 
|  | nrf_wdt_reload_value_set( | 
|  | (uint32_t)(((uint64_t)m_timeout * 32768) / 1000)); | 
|  |  | 
|  | nrfx_wdt_enable(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int wdt_nrf_disable(struct device *dev) | 
|  | { | 
|  | /* Started watchdog cannot be stopped on nRF devices. */ | 
|  | ARG_UNUSED(dev); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | static int wdt_nrf_install_timeout(struct device *dev, | 
|  | const struct wdt_timeout_cfg *cfg) | 
|  | { | 
|  | nrfx_err_t err_code; | 
|  | nrfx_wdt_channel_id channel_id; | 
|  |  | 
|  | ARG_UNUSED(dev); | 
|  |  | 
|  | if (cfg->flags != WDT_FLAG_RESET_SOC) { | 
|  | return -ENOTSUP; | 
|  | } | 
|  |  | 
|  | if (cfg->window.min != 0) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (m_allocated_channels == 0) { | 
|  | /* According to relevant Product Specifications, watchdogs | 
|  | * in all nRF chips can use reload values (determining | 
|  | * the timeout) from range 0xF-0xFFFFFFFF given in 32768 Hz | 
|  | * clock ticks. This makes the allowed range of 0x1-0x07CFFFFF | 
|  | * in milliseconds. Check if the provided value is within | 
|  | * this range. */ | 
|  | if ((cfg->window.max == 0) || (cfg->window.max > 0x07CFFFFF)) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /* Save timeout value from first registered watchdog channel. */ | 
|  | m_timeout = cfg->window.max; | 
|  | } else if (cfg->window.max != m_timeout) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | err_code = nrfx_wdt_channel_alloc(&channel_id); | 
|  |  | 
|  | if (err_code == NRFX_ERROR_NO_MEM) { | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (cfg->callback != NULL) { | 
|  | m_callbacks[channel_id] = cfg->callback; | 
|  | } | 
|  |  | 
|  | m_allocated_channels++; | 
|  | return channel_id; | 
|  | } | 
|  |  | 
|  | static int wdt_nrf_feed(struct device *dev, int channel_id) | 
|  | { | 
|  | ARG_UNUSED(dev); | 
|  | if (channel_id > m_allocated_channels) { | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | nrfx_wdt_channel_feed((nrfx_wdt_channel_id)channel_id); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wdt_nrf_enable(struct device *dev) | 
|  | { | 
|  | ARG_UNUSED(dev); | 
|  | /* Deprecated function. No implementation needed. */ | 
|  | LOG_ERR("Function not implemented!"); | 
|  | } | 
|  |  | 
|  | static int wdt_nrf_set_config(struct device *dev, struct wdt_config *config) | 
|  | { | 
|  | ARG_UNUSED(dev); | 
|  | ARG_UNUSED(config); | 
|  | /* Deprecated function. No implementation needed. */ | 
|  | LOG_ERR("Function not implemented!"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wdt_nrf_get_config(struct device *dev, struct wdt_config *config) | 
|  | { | 
|  | ARG_UNUSED(dev); | 
|  | ARG_UNUSED(config); | 
|  | /* Deprecated function. No implementation needed. */ | 
|  | LOG_ERR("Function not implemented!"); | 
|  | } | 
|  |  | 
|  | static void wdt_nrf_reload(struct device *dev) | 
|  | { | 
|  | ARG_UNUSED(dev); | 
|  | /* Deprecated function. No implementation needed. */ | 
|  | LOG_ERR("Function not implemented!"); | 
|  | } | 
|  |  | 
|  | static const struct wdt_driver_api wdt_nrf_api = { | 
|  | .setup = wdt_nrf_setup, | 
|  | .disable = wdt_nrf_disable, | 
|  | .install_timeout = wdt_nrf_install_timeout, | 
|  | .feed = wdt_nrf_feed, | 
|  | .enable = wdt_nrf_enable, | 
|  | .get_config = wdt_nrf_get_config, | 
|  | .set_config = wdt_nrf_set_config, | 
|  | .reload = wdt_nrf_reload, | 
|  | }; | 
|  |  | 
|  | static void wdt_event_handler(void) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < m_allocated_channels ; ++i) { | 
|  | if (nrf_wdt_request_status((nrf_wdt_rr_register_t)i)) { | 
|  | if (m_callbacks[i]) { | 
|  | m_callbacks[i](DEVICE_GET(wdt_nrfx), i); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static int init_wdt(struct device *dev) | 
|  | { | 
|  | nrfx_err_t err_code; | 
|  | /* Set default values. They will be overwritten by setup function. */ | 
|  | const nrfx_wdt_config_t config = { | 
|  | .behaviour          = NRF_WDT_BEHAVIOUR_RUN_SLEEP_HALT, | 
|  | .reload_value       = 2000 | 
|  | }; | 
|  |  | 
|  | ARG_UNUSED(dev); | 
|  |  | 
|  | err_code = nrfx_wdt_init(&config, wdt_event_handler); | 
|  | if (err_code != NRFX_SUCCESS) { | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | IRQ_CONNECT(DT_WDT_NRF_IRQ, DT_WDT_NRF_IRQ_PRI, | 
|  | nrfx_isr, nrfx_wdt_irq_handler, 0); | 
|  | irq_enable(DT_WDT_NRF_IRQ); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | DEVICE_AND_API_INIT(wdt_nrf, CONFIG_WDT_0_NAME, init_wdt, | 
|  | NULL, NULL, PRE_KERNEL_1, | 
|  | CONFIG_KERNEL_INIT_PRIORITY_DEVICE, &wdt_nrf_api); |