blob: 89d411f064bc0f0308e8868be54f8e9018c48c27 [file] [log] [blame]
# SPDX-License-Identifier: Apache-2.0
config SOC_FLASH_MCUX
bool "MCUX flash shim driver"
default y
depends on DT_HAS_NXP_KINETIS_FTFA_ENABLED || \
DT_HAS_NXP_KINETIS_FTFE_ENABLED || \
DT_HAS_NXP_KINETIS_FTFL_ENABLED || \
DT_HAS_NXP_IAP_FMC55_ENABLED || \
DT_HAS_NXP_IAP_FMC553_ENABLED
select FLASH_HAS_PAGE_LAYOUT
select FLASH_HAS_DRIVER_ENABLED
select MPU_ALLOW_FLASH_WRITE if ARM_MPU
help
Enables the MCUX flash shim driver.
WARNING: This driver will disable the system interrupts for
the duration of the flash erase/write operations. This will
have an impact on the overall system performance - whether
this is acceptable or not will depend on the use case.
if SOC_FLASH_MCUX
config CHECK_BEFORE_READING
bool "Verify area before reading it"
default y if SOC_SERIES_LPC55XXX
help
Do a margin check flash command before reading an area.
This feature prevents erroneous/forbidden reading. Some ECC enabled
devices will crash when reading an erased or wrongly programmed area.
endif # SOC_FLASH_MCUX
if DT_HAS_NXP_IMX_FLEXSPI_ENABLED
menu "Flexspi flash driver"
config FLASH_MCUX_FLEXSPI_NOR
bool "MCUX FlexSPI NOR driver"
default y
depends on DT_HAS_NXP_IMX_FLEXSPI_NOR_ENABLED
select FLASH_HAS_PAGE_LAYOUT
select FLASH_HAS_DRIVER_ENABLED
select MEMC
select MEMC_MCUX_FLEXSPI
config FLASH_MCUX_FLEXSPI_MX25UM51345G
bool "MCUX FlexSPI MX25UM51345G driver"
default y
depends on DT_HAS_NXP_IMX_FLEXSPI_MX25UM51345G_ENABLED
select FLASH_HAS_PAGE_LAYOUT
select FLASH_HAS_DRIVER_ENABLED
select MEMC
select MEMC_MCUX_FLEXSPI
config FLASH_MCUX_FLEXSPI_HYPERFLASH
bool "MCUX FlexSPI HYPERFLASH driver"
default y
depends on DT_HAS_NXP_IMX_FLEXSPI_HYPERFLASH_ENABLED
select FLASH_HAS_PAGE_LAYOUT
select FLASH_HAS_DRIVER_ENABLED
select MEMC
select MEMC_MCUX_FLEXSPI
endmenu
if FLASH_MCUX_FLEXSPI_MX25UM51345G
choice FLASH_MCUX_FLEXSPI_MX25UM51345G_OPI_MODE
prompt "FlexSPI MX25UM51345G OPI mode"
default FLASH_MCUX_FLEXSPI_MX25UM51345G_OPI_DTR
help
Select the MX25UM51345G octal flash operation mode(Octal I/O STR
or Octal I/O DTR).
config FLASH_MCUX_FLEXSPI_MX25UM51345G_OPI_STR
bool "STR"
config FLASH_MCUX_FLEXSPI_MX25UM51345G_OPI_DTR
bool "DTR"
endchoice
endif # FLASH_MCUX_FLEXSPI_MX25UM51345G
config FLASH_MCUX_FLEXSPI_NOR_WRITE_BUFFER
bool "MCUX FlexSPI NOR write RAM buffer"
default y
depends on (FLASH_MCUX_FLEXSPI_NOR || FLASH_MCUX_FLEXSPI_MX25UM51345G)
help
Copy the data to a RAM buffer before writing it to the flash.
This prevents faults when the data to write would be located on the
flash itself.
config FLASH_MCUX_FLEXSPI_HYPERFLASH_WRITE_BUFFER
bool "MCUX FlexSPI HYPERFLASH write RAM buffer"
default y
depends on FLASH_MCUX_FLEXSPI_HYPERFLASH
help
Copy the data to a RAM buffer before writing it to the flash.
This prevents faults when the data to write would be located on the
flash itself.
if FLASH_MCUX_FLEXSPI_XIP
choice FLASH_MCUX_FLEXSPI_XIP_MEM_TARGET
prompt "FlexSPI drivers relocation target"
default FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
help
Select the location to run the FlexSPI drivers when using
the flash API.
config FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
bool "ITCM"
select CODE_DATA_RELOCATION
config FLASH_MCUX_FLEXSPI_XIP_MEM_SRAM
bool "RAM"
select CODE_DATA_RELOCATION_SRAM
endchoice
config FLASH_MCUX_FLEXSPI_XIP_MEM
string
default "ITCM" if FLASH_MCUX_FLEXSPI_XIP_MEM_ITCM
default "RAM" if FLASH_MCUX_FLEXSPI_XIP_MEM_SRAM
endif # FLASH_MCUX_FLEXSPI_XIP
endif # HAS_MCUX_FLEXSPI