| # |
| # Copyright 2023, NXP |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| description: NXP MCUX MIPI DSI 2L |
| |
| compatible: "nxp,mipi-dsi-2l" |
| |
| include: mipi-dsi-host.yaml |
| |
| properties: |
| interrupts: |
| required: true |
| |
| nxp,lcdif: |
| type: phandle |
| description: |
| Instance of the LCDIF peripheral. Only required when using the MIPI |
| in video mode |
| dpi-color-coding: |
| type: string |
| enum: |
| - "16-bit-config-1" |
| - "16-bit-config-2" |
| - "16-bit-config-3" |
| - "18-bit-config-1" |
| - "18-bit-config-2" |
| - "24-bit" |
| description: |
| MIPI DPI interface color coding. Sets the distribution of RGB bits within |
| the 24-bit d bus, as specified by the DPI specification. |
| |
| dpi-pixel-packet: |
| type: string |
| enum: |
| - "16-bit" |
| - "18-bit" |
| - "18-bit-loose" |
| - "24-bit" |
| description: |
| MIPI DSI pixel packet type send through DPI interface. |
| |
| dpi-video-mode: |
| type: string |
| enum: |
| - "non-burst-sync-pulse" |
| - "non-burst-sync-event" |
| - "burst" |
| description: |
| DPI video mode. |
| |
| dpi-bllp-mode: |
| type: string |
| enum: |
| - "low-power" |
| - "blank" |
| - "null" |
| description: |
| Behavior in BLLP (Blanking or Low-Power Interval). |
| |
| autoinsert-eotp: |
| type: boolean |
| description: |
| Automatically insert an EoTp short packet when switching from HS to LP mode. |
| |
| dphy-ref-frequency: |
| type: int |
| default: 0 |
| description: |
| Maximum clock speed supported by the device, in Hz. Leave at default |
| if no DPHY PLL is present |
| |
| noncontinuous-hs-clk: |
| type: boolean |
| description: |
| Enable non-contiuous high speed clock. Saves power but introduces latency |
| when transitioning to high speed mode. |
