| # Copyright (c) 2024 Cirrus Logic, Inc. |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: | |
| Cirrus CP9314 Buck Switched Cap DC/DC Converter |
| |
| converter@72 { |
| compatible = "cirrus,cp9314"; |
| reg = <0x72>; |
| |
| cirrus,initial-switched-capacitor-mode = "2:1"; |
| }; |
| |
| compatible: "cirrus,cp9314" |
| |
| include: |
| - name: i2c-device.yaml |
| - name: regulator.yaml |
| property-allowlist: |
| - regulator-boot-on |
| |
| properties: |
| reg: |
| required: true |
| |
| cirrus,en-gpios: |
| type: phandle-array |
| description: GPIO tied to EN pin |
| |
| cirrus,pgood-gpios: |
| type: phandle-array |
| description: GPIO tied to PGOOD pin |
| |
| cirrus,initial-switched-capacitor-mode: |
| type: string |
| enum: |
| - "2:1" |
| - "3:1" |
| description: | |
| Desired switched capacitor ratio set at initialization. This entry will overwrite |
| the selection set by the PROG resistor. |
| |
| cirrus,hw-i2c-lock: |
| type: boolean |
| description: | |
| Indicate if the hardware write lock was enabled via the resistor value applied to |
| PGPIO2. |
