| # |
| # Copyright (c) 2023 Nordic Semiconductor ASA |
| # |
| # SPDX-License-Identifier: Apache-2.0 |
| # |
| |
| description: NPM1300 PMIC Charger |
| |
| compatible: "nordic,npm1300-charger" |
| |
| include: [sensor-device.yaml] |
| |
| properties: |
| term-microvolt: |
| type: int |
| required: true |
| description: | |
| Charge termination voltage in uV. |
| Available range is 3.5 V to 3.65 V and 4.0 V to 4.45 V in 50 mV steps. |
| |
| term-warm-microvolt: |
| type: int |
| description: | |
| Charge termination voltage when warm in uV. |
| Available range is 3.5 V to 3.65 V and 4.0 V to 4.45 V in 50 mV steps. |
| If omitted, the term-microvolt value will be used. |
| |
| current-microamp: |
| type: int |
| required: true |
| description: | |
| Charge current in uA. |
| Available range is 32 mA to 800 mA in 2mA steps. |
| The value specified will be rounded down to the closest implemented value. |
| |
| dischg-limit-microamp: |
| type: int |
| required: true |
| description: | |
| Discharge current limit in uA. |
| Available range is 270 mA to 1340 mA in 3.23 mA steps. |
| The value specified will be rounded down to the closest implemented value. |
| |
| vbus-limit-microamp: |
| type: int |
| description: | |
| Vbus current limit in uA. |
| Available values are 100 mA, or between 500 mA and 1500 mA in 100 mA steps. |
| If omitted, the default value of 100 mA will be used. |
| |
| thermistor-ohms: |
| type: int |
| required: true |
| enum: |
| - 0 |
| - 10000 |
| - 47000 |
| - 100000 |
| description: Thermistor nominal resistance type in ohms. |
| |
| thermistor-beta: |
| type: int |
| required: true |
| description: Beta value of selected thermistor. |
| |
| thermistor-cold-millidegrees: |
| type: int |
| description: Thermistor cold threshold in milli-degrees |
| |
| thermistor-cool-millidegrees: |
| type: int |
| description: Thermistor cool threshold in milli-degrees |
| |
| thermistor-warm-millidegrees: |
| type: int |
| description: Thermistor warm threshold in milli-degrees |
| |
| thermistor-hot-millidegrees: |
| type: int |
| description: Thermistor hot threshold in milli-degrees |
| |
| charging-enable: |
| type: boolean |
| description: | |
| Enable charging. |
| |
| trickle-microvolt: |
| type: int |
| enum: |
| - 2900000 |
| - 2500000 |
| default: 2900000 |
| description: | |
| Trickle voltage threshold in uV. |
| Trickle charging is enabled below this value. |
| If omitted the device default of 2.9V is used. |
| |
| term-current-percent: |
| type: int |
| enum: |
| - 10 |
| - 20 |
| default: 10 |
| description: | |
| Termination current, as a percentage of current-microamp. |
| Charge completes when the charge current falls below this value. |
| If omitted the device default of 10% is used. |
| |
| vbatlow-charge-enable: |
| type: boolean |
| description: | |
| Allow charging when below the vbatlow threshold. |
| |
| disable-recharge: |
| type: boolean |
| description: | |
| Disable automatic recharge. |
| |
| dietemp-stop-millidegrees: |
| type: int |
| description: | |
| Die temperature halt threshold in milli-degrees. |
| When die temperature exceeds this threshold, charging will be inhibited. |
| |
| dietemp-resume-millidegrees: |
| type: int |
| description: | |
| Die temperature resume threshold in milli-degrees. |
| When die temperature falls below this threshold, charging will be permitted. |