| /* |
| * Copyright (c) 2023 Intel Corporation. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| #include <zephyr/sys/__assert.h> |
| #include <zephyr/devicetree.h> |
| #include <zephyr/drivers/sensor.h> |
| #include <zephyr/init.h> |
| #include <zephyr/kernel.h> |
| #include <zephyr/rtio/rtio.h> |
| #include <zephyr/sensing/sensing.h> |
| #include <zephyr/sensing/sensing_sensor.h> |
| #include <zephyr/logging/log.h> |
| #include <stdlib.h> |
| #include "sensor_mgmt.h" |
| |
| #define DT_DRV_COMPAT zephyr_sensing |
| |
| BUILD_ASSERT(DT_NUM_INST_STATUS_OKAY(DT_DRV_COMPAT) == 1, |
| "only one 'zephyr_sensing' compatible node may be present"); |
| |
| LOG_MODULE_REGISTER(sensing, CONFIG_SENSING_LOG_LEVEL); |
| |
| static struct sensing_context sensing_ctx = { |
| }; |
| RTIO_DEFINE_WITH_MEMPOOL(sensing_rtio_ctx, CONFIG_SENSING_RTIO_SQE_NUM, |
| CONFIG_SENSING_RTIO_CQE_NUM, |
| CONFIG_SENSING_RTIO_BLOCK_COUNT, |
| CONFIG_SENSING_RTIO_BLOCK_SIZE, 4); |
| |
| static enum sensor_channel sensing_sensor_type_to_chan(const int32_t type) |
| { |
| switch (type) { |
| case SENSING_SENSOR_TYPE_MOTION_ACCELEROMETER_3D: |
| return SENSOR_CHAN_ACCEL_XYZ; |
| case SENSING_SENSOR_TYPE_MOTION_GYROMETER_3D: |
| return SENSOR_CHAN_GYRO_XYZ; |
| default: |
| break; |
| } |
| |
| return SENSOR_CHAN_PRIV_START; |
| } |
| |
| /* sensor_later_config including arbitrate/set interval/sensitivity |
| */ |
| static uint32_t arbitrate_interval(struct sensing_sensor *sensor) |
| { |
| struct sensing_connection *conn; |
| uint32_t min_interval = UINT32_MAX; |
| uint32_t interval; |
| |
| /* search from all clients, arbitrate the interval */ |
| for_each_client_conn(sensor, conn) { |
| LOG_INF("arbitrate interval, sensor:%s for each conn:%p, interval:%d(us)", |
| sensor->dev->name, conn, conn->interval); |
| if (!is_client_request_data(conn)) { |
| continue; |
| } |
| if (conn->interval < min_interval) { |
| min_interval = conn->interval; |
| } |
| } |
| /* min_interval == UINT32_MAX means sensor is not opened by any clients, |
| * then interval should be 0 |
| */ |
| interval = (min_interval == UINT32_MAX ? 0 : min_interval); |
| |
| LOG_DBG("arbitrate interval, sensor:%s, interval:%d(us)", |
| sensor->dev->name, interval); |
| |
| return interval; |
| } |
| |
| static int set_arbitrate_interval(struct sensing_sensor *sensor, uint32_t interval) |
| { |
| struct sensing_submit_config *config = sensor->iodev->data; |
| struct sensor_value odr = {0}; |
| int ret; |
| |
| __ASSERT(sensor && sensor->dev, "set arbitrate interval, sensor or sensor device is NULL"); |
| |
| LOG_INF("set arbitrate interval:%d, sensor:%s, is_streaming:%d", |
| interval, sensor->dev->name, config->is_streaming); |
| |
| if (interval) { |
| odr.val1 = USEC_PER_SEC / interval; |
| odr.val2 = (uint64_t)USEC_PER_SEC * 1000000 / interval % 1000000; |
| } |
| |
| ret = sensor_attr_set(sensor->dev, config->chan, |
| SENSOR_ATTR_SAMPLING_FREQUENCY, &odr); |
| if (ret) { |
| LOG_ERR("%s set attr freq failed:%d", sensor->dev->name, ret); |
| return ret; |
| } |
| |
| if (sensor->interval) { |
| if (config->is_streaming) { |
| rtio_sqe_cancel(sensor->stream_sqe); |
| } else { |
| k_timer_stop(&sensor->timer); |
| } |
| } |
| |
| if (interval) { |
| if (config->is_streaming) { |
| ret = sensor_stream(sensor->iodev, &sensing_rtio_ctx, |
| sensor, &sensor->stream_sqe); |
| } else { |
| k_timer_start(&sensor->timer, K_USEC(interval), |
| K_USEC(interval)); |
| } |
| } |
| |
| sensor->interval = interval; |
| |
| return ret; |
| } |
| |
| static int config_interval(struct sensing_sensor *sensor) |
| { |
| uint32_t interval = arbitrate_interval(sensor); |
| |
| LOG_INF("config interval, sensor:%s, interval:%d", sensor->dev->name, interval); |
| |
| return set_arbitrate_interval(sensor, interval); |
| } |
| |
| static uint32_t arbitrate_sensitivity(struct sensing_sensor *sensor, int index) |
| { |
| struct sensing_connection *conn; |
| uint32_t min_sensitivity = UINT32_MAX; |
| |
| /* search from all clients, arbitrate the sensitivity */ |
| for_each_client_conn(sensor, conn) { |
| LOG_DBG("arbitrate sensitivity, sensor:%s for each conn:%p, idx:%d, sens:%d", |
| sensor->dev->name, conn, index, |
| conn->sensitivity[index]); |
| if (!is_client_request_data(conn)) { |
| continue; |
| } |
| if (conn->sensitivity[index] < min_sensitivity) { |
| min_sensitivity = conn->sensitivity[index]; |
| } |
| } |
| LOG_DBG("arbitrate sensitivity, sensor:%s, min_sensitivity:%d", |
| sensor->dev->name, min_sensitivity); |
| |
| /* min_sensitivity == UINT32_MAX means no client is requesting to open sensor, |
| * by any client, in this case, return sensitivity 0 |
| */ |
| return (min_sensitivity == UINT32_MAX ? 0 : min_sensitivity); |
| } |
| |
| static int set_arbitrate_sensitivity(struct sensing_sensor *sensor, int index, uint32_t sensitivity) |
| { |
| struct sensing_submit_config *config = (struct sensing_submit_config *)sensor->iodev->data; |
| struct sensor_value threshold = {.val1 = sensitivity}; |
| int i; |
| |
| /* update sensor sensitivity */ |
| sensor->sensitivity[index] = sensitivity; |
| |
| for (i = 0; i < sensor->sensitivity_count; i++) { |
| threshold.val1 = MIN(sensor->sensitivity[i], threshold.val1); |
| } |
| |
| return sensor_attr_set(sensor->dev, config->chan, |
| SENSOR_ATTR_HYSTERESIS, &threshold); |
| } |
| |
| static int config_sensitivity(struct sensing_sensor *sensor, int index) |
| { |
| uint32_t sensitivity = arbitrate_sensitivity(sensor, index); |
| |
| LOG_INF("config sensitivity, sensor:%s, index:%d, sensitivity:%d", |
| sensor->dev->name, index, sensitivity); |
| |
| return set_arbitrate_sensitivity(sensor, index, sensitivity); |
| } |
| |
| static int config_sensor(struct sensing_sensor *sensor) |
| { |
| int ret; |
| int i = 0; |
| |
| ret = config_interval(sensor); |
| if (ret) { |
| LOG_WRN("sensor:%s config interval error", sensor->dev->name); |
| } |
| |
| for (i = 0; i < sensor->sensitivity_count; i++) { |
| ret = config_sensitivity(sensor, i); |
| if (ret) { |
| LOG_WRN("sensor:%s config sensitivity index:%d error:%d", |
| sensor->dev->name, i, ret); |
| } |
| } |
| |
| return ret; |
| } |
| |
| static void sensor_later_config(void) |
| { |
| LOG_INF("sensor later config begin..."); |
| |
| for_each_sensor_reverse(sensor) { |
| if (atomic_test_and_clear_bit(&sensor->flag, SENSOR_LATER_CFG_BIT)) { |
| LOG_INF("sensor later config, sensor:%s", |
| sensor->dev->name); |
| config_sensor(sensor); |
| } |
| } |
| } |
| |
| static void sensing_runtime_thread(void *p1, void *p2, void *p3) |
| { |
| struct sensing_context *ctx = p1; |
| int ret; |
| |
| LOG_INF("sensing runtime thread start..."); |
| |
| do { |
| ret = k_sem_take(&ctx->event_sem, K_FOREVER); |
| if (!ret) { |
| if (atomic_test_and_clear_bit(&ctx->event_flag, EVENT_CONFIG_READY)) { |
| LOG_INF("runtime thread triggered by EVENT_CONFIG_READY"); |
| sensor_later_config(); |
| } |
| } |
| } while (1); |
| } |
| |
| static void save_config_and_notify(struct sensing_sensor *sensor) |
| { |
| struct sensing_context *ctx = &sensing_ctx; |
| |
| __ASSERT(sensor, "save config and notify, sensing_sensor not be NULL"); |
| |
| LOG_INF("save config and notify, sensor:%s", sensor->dev->name); |
| |
| /* remember sensor_later_config bit to sensor */ |
| atomic_set_bit(&sensor->flag, SENSOR_LATER_CFG_BIT); |
| |
| /*remember event config ready and notify sensing_runtime_thread */ |
| atomic_set_bit(&ctx->event_flag, EVENT_CONFIG_READY); |
| |
| k_sem_give(&ctx->event_sem); |
| } |
| |
| static int set_sensor_state(struct sensing_sensor *sensor, enum sensing_sensor_state state) |
| { |
| __ASSERT(sensor, "set sensor state, sensing_sensor is NULL"); |
| |
| sensor->state = state; |
| |
| return 0; |
| } |
| |
| static void init_connection(struct sensing_connection *conn, |
| struct sensing_sensor *source, |
| struct sensing_sensor *sink) |
| { |
| __ASSERT(conn, "init each connection, invalid connection"); |
| |
| if (source) { |
| conn->source = source; |
| } |
| |
| if (sink) { |
| conn->sink = sink; |
| } |
| |
| conn->interval = 0; |
| memset(conn->sensitivity, 0x00, sizeof(conn->sensitivity)); |
| /* link connection to its reporter's client_list */ |
| sys_slist_append(&conn->source->client_list, &conn->snode); |
| } |
| |
| static void sensing_sensor_polling_timer(struct k_timer *timer_id) |
| { |
| struct sensing_sensor *sensor = CONTAINER_OF(timer_id, |
| struct sensing_sensor, timer); |
| |
| /* TODO: move it into sensing_runtime_thread */ |
| sensor_read_async_mempool(sensor->iodev, &sensing_rtio_ctx, sensor); |
| } |
| |
| static int init_sensor(struct sensing_sensor *sensor) |
| { |
| struct sensing_submit_config *config; |
| struct sensing_connection *conn; |
| int i; |
| |
| __ASSERT(sensor && sensor->dev, "init sensor, sensor or sensor device is NULL"); |
| |
| k_timer_init(&sensor->timer, sensing_sensor_polling_timer, NULL); |
| sys_slist_init(&sensor->client_list); |
| |
| for (i = 0; i < sensor->reporter_num; i++) { |
| conn = &sensor->conns[i]; |
| |
| /* source sensor has been assigned in compile time */ |
| init_connection(conn, NULL, sensor); |
| |
| LOG_INF("init sensor, reporter:%s, client:%s, connection:%d(%p)", |
| conn->source->dev->name, sensor->dev->name, i, conn); |
| } |
| |
| config = sensor->iodev->data; |
| config->chan = sensing_sensor_type_to_chan(sensor->info->type); |
| |
| return 0; |
| } |
| |
| static int sensing_init(const struct device *dev) |
| { |
| struct sensing_context *ctx = dev->data; |
| enum sensing_sensor_state state; |
| int ret = 0; |
| |
| LOG_INF("sensing init begin..."); |
| |
| for_each_sensor(sensor) { |
| ret = init_sensor(sensor); |
| if (ret) { |
| LOG_ERR("sensor:%s initial error", sensor->dev->name); |
| } |
| state = (ret ? SENSING_SENSOR_STATE_OFFLINE : SENSING_SENSOR_STATE_READY); |
| ret = set_sensor_state(sensor, state); |
| if (ret) { |
| LOG_ERR("set sensor:%s state:%d error", sensor->dev->name, state); |
| } |
| LOG_INF("sensing init, sensor:%s, state:%d", sensor->dev->name, sensor->state); |
| } |
| |
| k_sem_init(&ctx->event_sem, 0, 1); |
| |
| LOG_INF("create sensing runtime thread ok"); |
| ctx->sensing_initialized = true; |
| |
| return ret; |
| } |
| |
| int open_sensor(struct sensing_sensor *sensor, struct sensing_connection **conn) |
| { |
| struct sensing_connection *tmp_conn; |
| |
| if (sensor->state != SENSING_SENSOR_STATE_READY) { |
| return -EINVAL; |
| } |
| |
| /* create connection from sensor to application(client = NULL) */ |
| tmp_conn = malloc(sizeof(*tmp_conn)); |
| if (!tmp_conn) { |
| return -ENOMEM; |
| } |
| |
| init_connection(tmp_conn, sensor, NULL); |
| |
| *conn = tmp_conn; |
| |
| return 0; |
| } |
| |
| int close_sensor(struct sensing_connection **conn) |
| { |
| struct sensing_connection *tmp_conn = *conn; |
| |
| if (tmp_conn == NULL) { |
| LOG_ERR("connection should not be NULL"); |
| return -EINVAL; |
| } |
| |
| __ASSERT(!tmp_conn->sink, "sensor derived from device tree cannot be closed"); |
| |
| __ASSERT(tmp_conn->source, "reporter should not be NULL"); |
| |
| sys_slist_find_and_remove(&tmp_conn->source->client_list, &tmp_conn->snode); |
| |
| save_config_and_notify(tmp_conn->source); |
| |
| free(*conn); |
| *conn = NULL; |
| |
| return 0; |
| } |
| |
| int sensing_register_callback(struct sensing_connection *conn, |
| struct sensing_callback_list *cb_list) |
| { |
| if (conn == NULL) { |
| LOG_ERR("register sensing callback list, connection not be NULL"); |
| return -ENODEV; |
| } |
| |
| __ASSERT(!conn->sink, "only connection to application could register sensing callback"); |
| |
| if (cb_list == NULL) { |
| LOG_ERR("callback should not be NULL"); |
| return -ENODEV; |
| } |
| conn->callback_list = cb_list; |
| |
| return 0; |
| } |
| |
| int set_interval(struct sensing_connection *conn, uint32_t interval) |
| { |
| LOG_INF("set interval, sensor:%s, interval:%u(us)", conn->source->dev->name, interval); |
| |
| __ASSERT(conn && conn->source, "set interval, connection or reporter not be NULL"); |
| |
| if (interval > 0 && interval < conn->source->info->minimal_interval) { |
| LOG_ERR("interval:%d(us) should no less than min interval:%d(us)", |
| interval, conn->source->info->minimal_interval); |
| return -EINVAL; |
| } |
| |
| conn->interval = interval; |
| conn->next_consume_time = EXEC_TIME_INIT; |
| |
| LOG_INF("set interval, sensor:%s, conn:%p, interval:%d", |
| conn->source->dev->name, conn, interval); |
| |
| save_config_and_notify(conn->source); |
| |
| return 0; |
| } |
| |
| int get_interval(struct sensing_connection *conn, uint32_t *interval) |
| { |
| __ASSERT(conn, "get interval, connection not be NULL"); |
| *interval = conn->interval; |
| |
| LOG_INF("get interval, sensor:%s, interval:%u(us)", conn->source->dev->name, *interval); |
| |
| return 0; |
| } |
| |
| int set_sensitivity(struct sensing_connection *conn, int8_t index, uint32_t sensitivity) |
| { |
| int i; |
| |
| __ASSERT(conn && conn->source, "set sensitivity, connection or reporter not be NULL"); |
| |
| LOG_INF("set sensitivity, sensor:%s, index:%d, sensitivity:%d, count:%d", |
| conn->source->dev->name, index, |
| sensitivity, conn->source->sensitivity_count); |
| |
| if (index < SENSING_SENSITIVITY_INDEX_ALL || index >= conn->source->sensitivity_count) { |
| LOG_ERR("sensor:%s sensitivity index:%d invalid", conn->source->dev->name, index); |
| return -EINVAL; |
| } |
| |
| if (index == SENSING_SENSITIVITY_INDEX_ALL) { |
| for (i = 0; i < conn->source->sensitivity_count; i++) { |
| conn->sensitivity[i] = sensitivity; |
| } |
| } else { |
| conn->sensitivity[index] = sensitivity; |
| } |
| |
| return 0; |
| } |
| |
| int get_sensitivity(struct sensing_connection *conn, int8_t index, uint32_t *sensitivity) |
| { |
| int i = 0; |
| |
| __ASSERT(conn && conn->source, "get sensitivity, connection or reporter not be NULL"); |
| |
| *sensitivity = UINT32_MAX; |
| |
| if (index < SENSING_SENSITIVITY_INDEX_ALL || index >= conn->source->sensitivity_count) { |
| LOG_ERR("sensor:%s sensitivity index:%d invalid", conn->source->dev->name, index); |
| return -EINVAL; |
| } |
| |
| if (index == SENSING_SENSITIVITY_INDEX_ALL) { |
| /* each sensitivity index value should be same for global sensitivity */ |
| for (i = 1; i < conn->source->sensitivity_count; i++) { |
| if (conn->sensitivity[i] != conn->sensitivity[0]) { |
| LOG_ERR("sensitivity[%d]:%d should be same as sensitivity:%d", |
| i, conn->sensitivity[i], conn->sensitivity[0]); |
| return -EINVAL; |
| } |
| } |
| *sensitivity = conn->sensitivity[0]; |
| } else { |
| *sensitivity = conn->sensitivity[index]; |
| } |
| |
| LOG_INF("get_sensitivity, sensor:%s, index:%d, sensitivity:%d, count:%d", |
| conn->source->dev->name, index, |
| *sensitivity, conn->source->sensitivity_count); |
| |
| return 0; |
| } |
| |
| int sensing_get_sensors(int *sensor_nums, const struct sensing_sensor_info **info) |
| { |
| if (info == NULL) { |
| LOG_ERR("sensing_sensor_info should not be NULL"); |
| return -ENODEV; |
| } |
| |
| STRUCT_SECTION_COUNT(sensing_sensor_info, sensor_nums); |
| |
| STRUCT_SECTION_GET(sensing_sensor_info, 0, info); |
| |
| return 0; |
| } |
| |
| K_THREAD_DEFINE(sensing_runtime, CONFIG_SENSING_RUNTIME_THREAD_STACK_SIZE, sensing_runtime_thread, |
| &sensing_ctx, NULL, NULL, CONFIG_SENSING_RUNTIME_THREAD_PRIORITY, 0, 0); |
| |
| DEVICE_DT_INST_DEFINE(0, sensing_init, NULL, &sensing_ctx, NULL, POST_KERNEL, |
| CONFIG_SENSOR_INIT_PRIORITY, NULL); |