boards/ene/kb1200_evb/kb1200_evb.dts

/*
 * Copyright (c) 2023 ENE Technology Inc.
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <zephyr/dt-bindings/input/input-event-codes.h>
#include <ene/kb1200.dtsi>
#include <ene/kb1200-pinctrl.dtsi>
#include <dt-bindings/i2c/i2c.h>

/ {
	model = "KB1200 board";
	compatible = "ene,kb1200";

	aliases {
		uart0 = &uart0;
		led0 = &led0;
		led1 = &led1;
		sw0 = &user_button;
	};

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
	};

	gpio_keys {
		compatible = "gpio-keys";
		user_button: button {
			label = "User";
			gpios = <&gpio0x1x 0x10 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
			zephyr,code = <INPUT_KEY_0>;
		};
	};

	leds {
		compatible = "gpio-leds";
		/* green led */
		led0: led_0 {
			gpios = <&gpio0x1x 0x0f GPIO_ACTIVE_HIGH>;
			label = "LED0";
		};
		/* blue led */
		led1: led_1 {
			gpios = <&gpio0x1x 0x11 GPIO_ACTIVE_HIGH>;
			label = "LED1";
		};
	};
};

&uart0 {
	pinctrl-0 = <&uart0_tx_gpio03 &uart0_rx_gpio01>;
	pinctrl-names = "default";
	status = "okay";
	current-speed = <115200>;
};

&uart1 {
	pinctrl-0 = <&uart1_tx_gpio36 &uart1_rx_gpio28>;
	pinctrl-names = "default";
	status = "okay";
	current-speed = <115200>;
};

&uart2 {
	pinctrl-0 = <&uart2_tx_gpio04 &uart2_rx_gpio55>;
	pinctrl-names = "default";
	status = "okay";
	current-speed = <115200>;
};

&gpio0x1x {
	status = "okay";
};

&adc0 {
	status = "okay";
	pinctrl-0 = <&adc0_gpio0a &adc1_gpio0b &adc2_gpio0c &adc3_gpio0d>;
	pinctrl-names = "default";
};

&pwm0 {
	status = "okay";
	pinctrl-0 = <&pwm0_gpio3a>;
	pinctrl-names = "default";
};

&pwm4 {
	status = "okay";
	pinctrl-0 = <&pwm4_gpio31>;
	pinctrl-names = "default";
};

&pwm5 {
	status = "okay";
	pinctrl-0 = <&pwm5_gpio30>;
	pinctrl-names = "default";
};

&pwm6 {
	status = "okay";
	pinctrl-0 = <&pwm6_gpio37>;
	pinctrl-names = "default";
};

&tach0 {
	status = "okay";
	pinctrl-0 = <&tach0_gpio48>;
	pinctrl-names = "default";
	pulses-per-round = <2>;
	sample-time-us = <2>;
};

&tach1 {
	status = "okay";
	pinctrl-0 = <&tach1_gpio4e>;
	pinctrl-names = "default";
	pulses-per-round = <1>;
	sample-time-us = <8>;
};

&tach2 {
	status = "okay";
	pinctrl-0 = <&tach2_gpio0e>;
	pinctrl-names = "default";
	pulses-per-round = <2>;
	sample-time-us = <16>;
};

&tach3 {
	status = "okay";
	pinctrl-0 = <&tach3_gpio43>;
	pinctrl-names = "default";
	pulses-per-round = <1>;
	sample-time-us = <64>;
};

&wdt0 {
	status = "okay";
};

&i2c0 {
	status = "okay";
	clock-frequency = <I2C_BITRATE_STANDARD>;
	pinctrl-0 = <&i2c0_clk_gpio2c &i2c0_dat_gpio2d>;
	pinctrl-names = "default";
};

&i2c8 {
	status = "okay";
	clock-frequency = <I2C_BITRATE_STANDARD>;
	pinctrl-0 = <&i2c8_clk_gpio70 &i2c8_dat_gpio71>;
	pinctrl-names = "default";
};