blob: 06979b14c714cf83daf6dbaa220dcefd32d77c2d [file] [log] [blame]
/*
* Copyright (c) 2020 Jonas Eriksson, Up to Code AB
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <st/f1/stm32f100Xb.dtsi>
#include <st/f1/stm32f100r(8-b)tx-pinctrl.dtsi>
#include <zephyr/dt-bindings/input/input-event-codes.h>
/ {
model = "STMicroelectronics STM32VLDISCOVERY board";
compatible = "st,stm32vldiscovery";
chosen {
zephyr,console = &usart1;
zephyr,shell-uart = &usart1;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
green_led: ld3 {
gpios = <&gpioc 9 GPIO_ACTIVE_HIGH>;
label = "User LD3";
};
blue_led: ld4 {
gpios = <&gpioc 8 GPIO_ACTIVE_HIGH>;
label = "User LD4";
};
};
gpio_keys {
compatible = "gpio-keys";
user_button: button {
label = "User";
gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
zephyr,code = <INPUT_KEY_0>;
};
};
aliases {
led0 = &green_led;
led1 = &blue_led;
sw0 = &user_button;
};
};
&clk_hsi {
status = "okay";
};
&pll {
mul = <6>;
prediv = <1>;
clocks = <&clk_hsi>;
status = "okay";
};
&rcc {
clocks = <&pll>;
clock-frequency = <DT_FREQ_M(24)>;
ahb-prescaler = <1>;
apb1-prescaler = <2>;
apb2-prescaler = <1>;
};
&usart1 {
pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&usart2 {
pinctrl-0 = <&usart2_tx_pa2 &usart2_rx_pa3>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&usart3 {
pinctrl-0 = <&usart3_tx_pb10 &usart3_rx_pb11>;
pinctrl-names = "default";
current-speed = <115200>;
status = "okay";
};
&i2c1 {
pinctrl-0 = <&i2c1_scl_pb6 &i2c1_sda_pb7>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&i2c2 {
pinctrl-0 = <&i2c2_scl_pb10 &i2c2_sda_pb11>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <I2C_BITRATE_FAST>;
};
&spi1 {
pinctrl-0 = <&spi1_nss_master_pa4 &spi1_sck_master_pa5
&spi1_miso_master_pa6 &spi1_mosi_master_pa7>;
pinctrl-names = "default";
status = "okay";
};
&spi2 {
pinctrl-0 = <&spi2_nss_master_pb12 &spi2_sck_master_pb13
&spi2_miso_master_pb14 &spi2_mosi_master_pb15>;
pinctrl-names = "default";
status = "okay";
};
&timers1 {
st,prescaler = <10000>;
status = "okay";
pwm1: pwm {
status = "okay";
pinctrl-0 = <&tim1_ch1_pwm_out_pa8>;
pinctrl-names = "default";
};
};