| # Copyright (c) 2018, Linaro Limited |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: ENC28J60 standalone 10BASE-T Ethernet controller with SPI interface |
| |
| compatible: "microchip,enc28j60" |
| |
| include: [spi-device.yaml, ethernet-controller.yaml] |
| |
| properties: |
| int-gpios: |
| type: phandle-array |
| required: true |
| description: Interrupt pin. |
| |
| The interrupt pin of ENC28J60 is active low. |
| If connected directly the MCU pin should be configured |
| as active low. |
| |
| full-duplex: |
| type: boolean |
| description: | |
| Optional feature flag - Enables full duplex reception and transmission. |
| |
| hw-rx-filter: |
| type: int |
| description: | |
| Byte value written to the device's |
| ERXFCON: ETHERNET RECEIVE FILTER CONTROL REGISTER |
| Sets the devices receive packet filter, optional |
| If not set in device tree `0xA3` is used, uni, multi and broadcast |
| packets with valid CRC are accepted. |
