dts/bindings/pwm/nxp,s32-emios-pwm.yaml

# Copyright 2023 NXP
# SPDX-License-Identifier: Apache-2.0

description: |
  NXP S32 eMIOS PWM node for S32 SoCs. Each channel in eMIOS can be configured
  to use for PWM operation. There are several PWM modes supported by this module,
  some modes only support on channels that have internal counter, some modes
  require to use a reference timebase from a master bus.

  For example to configuring eMIOS instance 0 with:
    - Channel 0 for mode OPWFMB
    - Channel 1 for mode OPWMB
    - Channel 2 for mode OPWMCB with deadtime inserted at leading edge
    - Channel 3 for mode SAIC, use internal timebase with input filter = 2 eMIOS clock

    emios0_pwm: pwm {
      pwm_0 {
        channel = <0>;
        pwm-mode = "OPWFMB";
        prescaler = <8>;
        period = <65534>;
        duty-cycle = <32768>;
        polarity = "ACTIVE_HIGH";
      };

      pwm_1 {
        channel = <1>;
        master-bus = <&emios1_bus_a>;
        pwm-mode = "OPWMB";
        duty-cycle = <32768>;
        phase-shift = <100>;
        polarity = "ACTIVE_LOW";
      };

      pwm_2 {
        channel = <2>;
        master-bus = <&emios1_bus_b>;
        pwm-mode = "OPWMCB_LEAD_EDGE";
        duty-cycle = <32768>;
        dead-time = <100>;
        polarity = "ACTIVE_LOW";
      };

      pwm_3 {
        channel = <3>;
        pwm-mode = "SAIC";
        prescaler = <8>;
        input-filter = <2>;
      };
    };

  OPWMB and OPWMCB modes use reference timebase, the master bus is chosen over
  phandle 'master-bus'. For OPWMB mode, PWM's period is master bus's period and
  is 2 * master bus's period - 2 for OPWMCB mode. Please notice that the devicetree
  node for master bus should be enabled and configured for using, please see
  'nxp,s32-emios' bindings.

compatible: "nxp,s32-emios-pwm"

include: [pwm-controller.yaml, base.yaml, pinctrl-device.yaml]

properties:
  pinctrl-0:
    required: true

  pinctrl-names:
    required: true

  "#pwm-cells":
    const: 3

pwm-cells:
  - channel
  # Period in terms of nanoseconds
  - period
  - flags

child-binding:
  description: |
    eMIOS PWM channel configuration.

  properties:
    channel:
      type: int
      required: true
      description: eMIOS PWM channel

    master-bus:
      type: phandle
      description: |
        A phandle to master-bus node that will be used as external timebase
        for current channel, this can be bypassed if internal counter is used
        for PWM operation. A master bus must be used exclusively, such as if
        is used as a timebase for a channel in SAIC mode, do not use that
        master bus as a timebase for generate PWM pulse.

    pwm-mode:
      type: string
      required: true
      description: |
        Select PWM mode:
        - OPWFMB: provides waveforms with variable duty cycle and frequency,
                  this mode uses internal counter.

        - OPWMB:  generate pulses with programmable leading and trailing
                  edge placement. The period is determined by period of
                  an external counter driven in MCB Up Mode. Changing PWM period
                  at runtime will impact to all channels share the same timebase.
                  The new period and cycle take effect in next period boundary.

        - OPWMCB: generates a center aligned PWM with dead time insertion to the
                  leading or trailing edge. The period is determined by period of
                  an external counter driven in MCB Up Down Mode. Changing PWM period
                  at runtime will impact to all channels share the same timebase,
                  The new period and cycle take effect in next period boundary.

        - SAIC: single action input capture mode, the eMIOS captures events as soon as
                they occur. The value of latest captured event is stored and can be read
                by software.
      enum:
        - "OPWFMB"
        - "OPWMB"
        - "OPWMCB_TRAIL_EDGE"
        - "OPWMCB_LEAD_EDGE"
        - "SAIC"

    polarity:
      type: string
      description: |
        Output polarity for PWM channel.
      enum:
        - "ACTIVE_LOW"
        - "ACTIVE_HIGH"

    duty-cycle:
      type: int
      description: |
        Duty-cycle (in ticks) for PWM channel at boot time.

    period:
      type: int
      description: |
        Period (in ticks) for OPWFMB at boot time. Period for the rest
        of PWM mode depends on period's master bus. Must be in range [2 ... 65535].

    freeze:
      type: boolean
      description: Freeze individual internal counter when the chip enters Debug mode.

    prescaler-src:
      type: string
      default: "PRESCALED_CLOCK"
      description: |
        Select clock source for internal counter prescaler.
      enum:
        - "PRESCALED_CLOCK" # Clock source = eMIOS clock / (global prescaler)
        - "MODULE_CLOCK"    # Clock source = eMIOS clock

    prescaler:
      type: int
      description: |
        The clock divider for internal counter prescaler.
      enum: [1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16]

    dead-time:
      type: int
      default: 0
      description: |
        Dead time (in ticks) for PWM channel in OPWMCB mode.

    phase-shift:
      type: int
      default: 0
      description: |
        Phase Shift (in ticks) for PWM channel in OPWMB mode.

    input-filter:
      type: int
      default: 0
      enum: [0, 2, 4, 8, 16]
      description: |
        Select the minimum input pulse width, in filter clock cycles that can pass
        through the input filter. The filter latency - the difference in time between
        the input and the response is three clock edges. Default 0 means the filter
        is bypassed. The clock source for programmable input filter is eMIOS clock.