| /* |
| * Copyright (c) 2017 Intel Corporation |
| * Copyright (c) 2020 Lingao Meng |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <errno.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| |
| #include <zephyr/net/buf.h> |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/conn.h> |
| #include <zephyr/bluetooth/mesh.h> |
| #include <zephyr/bluetooth/uuid.h> |
| |
| #include "common/bt_str.h" |
| |
| #include "crypto.h" |
| #include "mesh.h" |
| #include "net.h" |
| #include "rpl.h" |
| #include "beacon.h" |
| #include "access.h" |
| #include "foundation.h" |
| #include "proxy.h" |
| #include "pb_gatt_srv.h" |
| #include "prov.h" |
| #include "settings.h" |
| #include "rpr.h" |
| |
| #define LOG_LEVEL CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_mesh_provisionee); |
| |
| static void reprovision_fail(void); |
| |
| static void prov_send_fail_msg(uint8_t err) |
| { |
| PROV_BUF(buf, PDU_LEN_FAILED); |
| |
| LOG_DBG("%u", err); |
| |
| bt_mesh_prov_link.expect = PROV_NO_PDU; |
| |
| bt_mesh_prov_buf_init(&buf, PROV_FAILED); |
| net_buf_simple_add_u8(&buf, err); |
| |
| if (bt_mesh_prov_send(&buf, NULL)) { |
| LOG_ERR("Failed to send Provisioning Failed message"); |
| } |
| } |
| |
| static void prov_fail(uint8_t reason) |
| { |
| /* According to MshPRTv1.1: 5.4.4, the provisioner just closes the link when something |
| * fails, while the provisionee sends the fail message, and waits for the provisioner to |
| * close the link. |
| */ |
| prov_send_fail_msg(reason); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && |
| atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION)) { |
| reprovision_fail(); |
| } |
| } |
| |
| static void prov_invite(const uint8_t *data) |
| { |
| PROV_BUF(buf, PDU_LEN_CAPABILITIES); |
| |
| LOG_DBG("Attention Duration: %u seconds", data[0]); |
| |
| if (data[0]) { |
| bt_mesh_attention(NULL, data[0]); |
| } |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.invite, data, PDU_LEN_INVITE); |
| |
| bt_mesh_prov_buf_init(&buf, PROV_CAPABILITIES); |
| |
| /* Number of Elements supported */ |
| net_buf_simple_add_u8(&buf, bt_mesh_elem_count()); |
| |
| uint16_t algorithm_bm = 0; |
| uint8_t oob_type = bt_mesh_prov->static_val ? |
| BT_MESH_STATIC_OOB_AVAILABLE : 0; |
| bool oob_availability = bt_mesh_prov->output_size > 0 || |
| bt_mesh_prov->input_size > 0 || bt_mesh_prov->static_val; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_HMAC_SHA256_AES_CCM)) { |
| WRITE_BIT(algorithm_bm, BT_MESH_PROV_AUTH_HMAC_SHA256_AES_CCM, 1); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_CMAC_AES128_AES_CCM)) { |
| WRITE_BIT(algorithm_bm, BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM, 1); |
| } |
| |
| if (oob_availability && IS_ENABLED(CONFIG_BT_MESH_OOB_AUTH_REQUIRED)) { |
| oob_type |= BT_MESH_OOB_AUTH_REQUIRED; |
| WRITE_BIT(algorithm_bm, BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM, 0); |
| } |
| |
| /* Supported algorithms */ |
| net_buf_simple_add_be16(&buf, algorithm_bm); |
| |
| /* Public Key Type */ |
| net_buf_simple_add_u8(&buf, |
| bt_mesh_prov->public_key_be == NULL ? PUB_KEY_NO_OOB : PUB_KEY_OOB); |
| |
| /* Static OOB Type */ |
| net_buf_simple_add_u8(&buf, oob_type); |
| |
| /* Output OOB Size */ |
| net_buf_simple_add_u8(&buf, bt_mesh_prov->output_size); |
| |
| /* Output OOB Action */ |
| net_buf_simple_add_be16(&buf, bt_mesh_prov->output_actions); |
| |
| /* Input OOB Size */ |
| net_buf_simple_add_u8(&buf, bt_mesh_prov->input_size); |
| |
| /* Input OOB Action */ |
| net_buf_simple_add_be16(&buf, bt_mesh_prov->input_actions); |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.capabilities, &buf.data[1], PDU_LEN_CAPABILITIES); |
| |
| if (bt_mesh_prov_send(&buf, NULL)) { |
| LOG_ERR("Failed to send capabilities"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_START; |
| } |
| |
| static void prov_start(const uint8_t *data) |
| { |
| LOG_DBG("Algorithm: 0x%02x", data[0]); |
| LOG_DBG("Public Key: 0x%02x", data[1]); |
| LOG_DBG("Auth Method: 0x%02x", data[2]); |
| LOG_DBG("Auth Action: 0x%02x", data[3]); |
| LOG_DBG("Auth Size: 0x%02x", data[4]); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_HMAC_SHA256_AES_CCM) && |
| data[0] == BT_MESH_PROV_AUTH_HMAC_SHA256_AES_CCM) { |
| bt_mesh_prov_link.algorithm = data[0]; |
| } else if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_CMAC_AES128_AES_CCM) && |
| data[0] == BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM) { |
| bt_mesh_prov_link.algorithm = data[0]; |
| } else { |
| LOG_ERR("Unknown algorithm 0x%02x", data[0]); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| uint8_t auth_size = bt_mesh_prov_auth_size_get(); |
| |
| if (data[1] > PUB_KEY_OOB || |
| (data[1] == PUB_KEY_OOB && |
| (!IS_ENABLED(CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY) || !bt_mesh_prov->public_key_be))) { |
| LOG_ERR("Invalid public key type: 0x%02x", data[1]); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| atomic_set_bit_to(bt_mesh_prov_link.flags, OOB_PUB_KEY, data[1] == PUB_KEY_OOB); |
| |
| memcpy(bt_mesh_prov_link.conf_inputs.start, data, PDU_LEN_START); |
| |
| bt_mesh_prov_link.expect = PROV_PUB_KEY; |
| bt_mesh_prov_link.oob_method = data[2]; |
| bt_mesh_prov_link.oob_action = data[3]; |
| bt_mesh_prov_link.oob_size = data[4]; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_OOB_AUTH_REQUIRED) && |
| (bt_mesh_prov_link.oob_method == AUTH_METHOD_NO_OOB || |
| bt_mesh_prov_link.algorithm == BT_MESH_PROV_AUTH_CMAC_AES128_AES_CCM)) { |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| if (bt_mesh_prov_auth(false, data[2], data[3], data[4]) < 0) { |
| LOG_ERR("Invalid authentication method: 0x%02x; " |
| "action: 0x%02x; size: 0x%02x", data[2], data[3], data[4]); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, OOB_STATIC_KEY)) { |
| /* Trim the Auth if it is longer than required length */ |
| memcpy(bt_mesh_prov_link.auth, bt_mesh_prov->static_val, |
| bt_mesh_prov->static_val_len > auth_size ? auth_size |
| : bt_mesh_prov->static_val_len); |
| |
| /* Padd with zeros if the Auth is shorter the required length*/ |
| if (bt_mesh_prov->static_val_len < auth_size) { |
| memset(bt_mesh_prov_link.auth + bt_mesh_prov->static_val_len, 0, |
| auth_size - bt_mesh_prov->static_val_len); |
| } |
| } |
| } |
| |
| static void send_confirm(void) |
| { |
| PROV_BUF(cfm, PDU_LEN_CONFIRM); |
| uint8_t auth_size = bt_mesh_prov_auth_size_get(); |
| uint8_t *inputs = (uint8_t *)&bt_mesh_prov_link.conf_inputs; |
| uint8_t conf_key_input[64]; |
| |
| LOG_DBG("ConfInputs[0] %s", bt_hex(inputs, 32)); |
| LOG_DBG("ConfInputs[32] %s", bt_hex(&inputs[32], 32)); |
| LOG_DBG("ConfInputs[64] %s", bt_hex(&inputs[64], 32)); |
| LOG_DBG("ConfInputs[96] %s", bt_hex(&inputs[96], 32)); |
| LOG_DBG("ConfInputs[128] %s", bt_hex(&inputs[128], 17)); |
| |
| if (bt_mesh_prov_conf_salt(bt_mesh_prov_link.algorithm, inputs, |
| bt_mesh_prov_link.conf_salt)) { |
| LOG_ERR("Unable to generate confirmation salt"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| LOG_DBG("ConfirmationSalt: %s", bt_hex(bt_mesh_prov_link.conf_salt, auth_size)); |
| |
| memcpy(conf_key_input, bt_mesh_prov_link.dhkey, 32); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_ECDH_P256_HMAC_SHA256_AES_CCM) && |
| bt_mesh_prov_link.algorithm == BT_MESH_PROV_AUTH_HMAC_SHA256_AES_CCM) { |
| memcpy(&conf_key_input[32], bt_mesh_prov_link.auth, 32); |
| LOG_DBG("AuthValue %s", bt_hex(bt_mesh_prov_link.auth, 32)); |
| } |
| |
| if (bt_mesh_prov_conf_key(bt_mesh_prov_link.algorithm, conf_key_input, |
| bt_mesh_prov_link.conf_salt, bt_mesh_prov_link.conf_key)) { |
| LOG_ERR("Unable to generate confirmation key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| LOG_DBG("ConfirmationKey: %s", bt_hex(bt_mesh_prov_link.conf_key, auth_size)); |
| |
| if (bt_rand(bt_mesh_prov_link.rand, auth_size)) { |
| LOG_ERR("Unable to generate random number"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| LOG_DBG("LocalRandom: %s", bt_hex(bt_mesh_prov_link.rand, auth_size)); |
| |
| bt_mesh_prov_buf_init(&cfm, PROV_CONFIRM); |
| |
| if (bt_mesh_prov_conf(bt_mesh_prov_link.algorithm, bt_mesh_prov_link.conf_key, |
| bt_mesh_prov_link.rand, bt_mesh_prov_link.auth, |
| net_buf_simple_add(&cfm, auth_size))) { |
| LOG_ERR("Unable to generate confirmation value"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| if (bt_mesh_prov_send(&cfm, NULL)) { |
| LOG_ERR("Failed to send Provisioning Confirm"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_RANDOM; |
| |
| } |
| |
| static void send_input_complete(void) |
| { |
| PROV_BUF(buf, PDU_LEN_INPUT_COMPLETE); |
| |
| bt_mesh_prov_buf_init(&buf, PROV_INPUT_COMPLETE); |
| if (bt_mesh_prov_send(&buf, NULL)) { |
| LOG_ERR("Failed to send Provisioning Input Complete"); |
| } |
| bt_mesh_prov_link.expect = PROV_CONFIRM; |
| } |
| |
| static void public_key_sent(int err, void *cb_data) |
| { |
| atomic_set_bit(bt_mesh_prov_link.flags, PUB_KEY_SENT); |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, INPUT_COMPLETE)) { |
| send_input_complete(); |
| return; |
| } |
| } |
| |
| static void start_auth(void) |
| { |
| if (atomic_test_bit(bt_mesh_prov_link.flags, WAIT_NUMBER) || |
| atomic_test_bit(bt_mesh_prov_link.flags, WAIT_STRING)) { |
| bt_mesh_prov_link.expect = PROV_NO_PDU; /* Wait for input */ |
| } else { |
| bt_mesh_prov_link.expect = PROV_CONFIRM; |
| } |
| } |
| |
| static void send_pub_key(void) |
| { |
| PROV_BUF(buf, PDU_LEN_PUB_KEY); |
| const uint8_t *key; |
| |
| key = bt_mesh_pub_key_get(); |
| if (!key) { |
| LOG_ERR("No public key available"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| bt_mesh_prov_buf_init(&buf, PROV_PUB_KEY); |
| net_buf_simple_add_mem(&buf, key, PUB_KEY_SIZE); |
| LOG_DBG("Local Public Key: %s", bt_hex(buf.data + 1, PUB_KEY_SIZE)); |
| |
| /* PublicKeyDevice */ |
| memcpy(bt_mesh_prov_link.conf_inputs.pub_key_device, &buf.data[1], PDU_LEN_PUB_KEY); |
| |
| if (bt_mesh_prov_send(&buf, public_key_sent)) { |
| LOG_ERR("Failed to send Public Key"); |
| return; |
| } |
| |
| start_auth(); |
| } |
| |
| static void prov_dh_key_gen(void) |
| { |
| const uint8_t *remote_pub_key; |
| const uint8_t *remote_priv_key; |
| |
| remote_pub_key = bt_mesh_prov_link.conf_inputs.pub_key_provisioner; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY) && |
| atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { |
| remote_priv_key = bt_mesh_prov->private_key_be; |
| } else { |
| remote_priv_key = NULL; |
| } |
| |
| if (bt_mesh_dhkey_gen(remote_pub_key, remote_priv_key, bt_mesh_prov_link.dhkey)) { |
| LOG_ERR("Failed to generate DHKey"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| LOG_DBG("DHkey: %s", bt_hex(bt_mesh_prov_link.dhkey, DH_KEY_SIZE)); |
| |
| if (atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { |
| start_auth(); |
| } else { |
| send_pub_key(); |
| } |
| } |
| |
| static void prov_dh_key_gen_handler(struct k_work *work) |
| { |
| prov_dh_key_gen(); |
| } |
| |
| static K_WORK_DEFINE(dh_gen_work, prov_dh_key_gen_handler); |
| |
| static void prov_pub_key(const uint8_t *data) |
| { |
| LOG_DBG("Remote Public Key: %s", bt_hex(data, PUB_KEY_SIZE)); |
| |
| /* PublicKeyProvisioner */ |
| memcpy(bt_mesh_prov_link.conf_inputs.pub_key_provisioner, data, PDU_LEN_PUB_KEY); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PROV_OOB_PUBLIC_KEY) && |
| atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { |
| if (!bt_mesh_prov->public_key_be || !bt_mesh_prov->private_key_be) { |
| LOG_ERR("Public or private key is not ready"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| if (!memcmp(bt_mesh_prov->public_key_be, |
| bt_mesh_prov_link.conf_inputs.pub_key_provisioner, PDU_LEN_PUB_KEY)) { |
| LOG_ERR("Public keys are identical"); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| /* No swap needed since user provides public key in big-endian */ |
| memcpy(bt_mesh_prov_link.conf_inputs.pub_key_device, bt_mesh_prov->public_key_be, |
| PDU_LEN_PUB_KEY); |
| } |
| |
| k_work_submit(&dh_gen_work); |
| } |
| |
| static void notify_input_complete(void) |
| { |
| if (atomic_test_and_clear_bit(bt_mesh_prov_link.flags, |
| NOTIFY_INPUT_COMPLETE) && |
| bt_mesh_prov->input_complete) { |
| bt_mesh_prov->input_complete(); |
| } |
| } |
| |
| static void send_random(void) |
| { |
| PROV_BUF(rnd, PDU_LEN_RANDOM); |
| |
| bt_mesh_prov_buf_init(&rnd, PROV_RANDOM); |
| net_buf_simple_add_mem(&rnd, bt_mesh_prov_link.rand, bt_mesh_prov_auth_size_get()); |
| |
| if (bt_mesh_prov_send(&rnd, NULL)) { |
| LOG_ERR("Failed to send Provisioning Random"); |
| return; |
| } |
| |
| bt_mesh_prov_link.expect = PROV_DATA; |
| } |
| |
| static void prov_random(const uint8_t *data) |
| { |
| uint8_t rand_size = bt_mesh_prov_auth_size_get(); |
| uint8_t conf_verify[PROV_AUTH_MAX_LEN]; |
| |
| LOG_DBG("Remote Random: %s", bt_hex(data, rand_size)); |
| if (!memcmp(data, bt_mesh_prov_link.rand, rand_size)) { |
| LOG_ERR("Random value is identical to ours, rejecting."); |
| prov_fail(PROV_ERR_CFM_FAILED); |
| return; |
| } |
| |
| if (bt_mesh_prov_conf(bt_mesh_prov_link.algorithm, bt_mesh_prov_link.conf_key, |
| data, bt_mesh_prov_link.auth, conf_verify)) { |
| LOG_ERR("Unable to calculate confirmation verification"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| if (memcmp(conf_verify, bt_mesh_prov_link.conf, rand_size)) { |
| LOG_ERR("Invalid confirmation value"); |
| LOG_DBG("Received: %s", bt_hex(bt_mesh_prov_link.conf, rand_size)); |
| LOG_DBG("Calculated: %s", bt_hex(conf_verify, rand_size)); |
| prov_fail(PROV_ERR_CFM_FAILED); |
| return; |
| } |
| |
| if (bt_mesh_prov_salt(bt_mesh_prov_link.algorithm, bt_mesh_prov_link.conf_salt, |
| data, bt_mesh_prov_link.rand, bt_mesh_prov_link.prov_salt)) { |
| LOG_ERR("Failed to generate provisioning salt"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| LOG_DBG("ProvisioningSalt: %s", bt_hex(bt_mesh_prov_link.prov_salt, 16)); |
| |
| send_random(); |
| } |
| |
| static void prov_confirm(const uint8_t *data) |
| { |
| uint8_t conf_size = bt_mesh_prov_auth_size_get(); |
| |
| LOG_DBG("Remote Confirm: %s", bt_hex(data, conf_size)); |
| |
| memcpy(bt_mesh_prov_link.conf, data, conf_size); |
| notify_input_complete(); |
| |
| send_confirm(); |
| } |
| |
| static inline bool is_pb_gatt(void) |
| { |
| return bt_mesh_prov_link.bearer && |
| bt_mesh_prov_link.bearer->type == BT_MESH_PROV_GATT; |
| } |
| |
| static bool refresh_is_valid(const uint8_t *netkey, uint16_t net_idx, |
| uint32_t iv_index) |
| { |
| enum bt_mesh_rpr_node_refresh proc = bt_mesh_node_refresh_get(); |
| struct bt_mesh_subnet *sub = bt_mesh_subnet_get(net_idx); |
| uint16_t old_addr = bt_mesh_primary_addr(); |
| bool valid_addr; |
| |
| if (iv_index != bt_mesh.iv_index) { |
| LOG_ERR("Invalid IV index"); |
| return false; |
| } |
| |
| if (!sub || bt_mesh_key_compare(netkey, &sub->keys[SUBNET_KEY_TX_IDX(sub)].net)) { |
| LOG_ERR("Invalid netkey"); |
| return false; |
| } |
| |
| if (proc == BT_MESH_RPR_NODE_REFRESH_ADDR) { |
| valid_addr = bt_mesh_prov_link.addr < old_addr || |
| bt_mesh_prov_link.addr >= old_addr + bt_mesh_comp_get()->elem_count; |
| } else { |
| valid_addr = bt_mesh_prov_link.addr == bt_mesh_primary_addr(); |
| } |
| |
| if (!valid_addr) { |
| LOG_ERR("Invalid address"); |
| } |
| |
| return valid_addr; |
| } |
| |
| static void prov_data(const uint8_t *data) |
| { |
| PROV_BUF(msg, PDU_LEN_COMPLETE); |
| struct bt_mesh_key session_key; |
| uint8_t nonce[13]; |
| uint8_t dev_key[16]; |
| uint8_t pdu[25]; |
| uint8_t flags; |
| uint32_t iv_index; |
| uint16_t net_idx; |
| int err; |
| bool identity_enable; |
| |
| LOG_DBG(""); |
| |
| err = bt_mesh_session_key(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.prov_salt, &session_key); |
| if (err) { |
| LOG_ERR("Unable to generate session key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| err = bt_mesh_prov_nonce(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.prov_salt, nonce); |
| if (err) { |
| LOG_ERR("Unable to generate session nonce"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| goto session_key_destructor; |
| } |
| |
| LOG_DBG("Nonce: %s", bt_hex(nonce, 13)); |
| |
| err = bt_mesh_prov_decrypt(&session_key, nonce, data, pdu); |
| if (err) { |
| LOG_ERR("Unable to decrypt provisioning data"); |
| prov_fail(PROV_ERR_DECRYPT); |
| goto session_key_destructor; |
| } |
| |
| err = bt_mesh_dev_key(bt_mesh_prov_link.dhkey, |
| bt_mesh_prov_link.prov_salt, dev_key); |
| if (err) { |
| LOG_ERR("Unable to generate device key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| goto session_key_destructor; |
| } |
| |
| net_idx = sys_get_be16(&pdu[16]); |
| flags = pdu[18]; |
| iv_index = sys_get_be32(&pdu[19]); |
| bt_mesh_prov_link.addr = sys_get_be16(&pdu[23]); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && |
| atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION) && |
| !refresh_is_valid(pdu, net_idx, iv_index)) { |
| prov_send_fail_msg(PROV_ERR_INVALID_DATA); |
| goto session_key_destructor; |
| } |
| |
| LOG_DBG("net_idx %u iv_index 0x%08x, addr 0x%04x", |
| net_idx, iv_index, bt_mesh_prov_link.addr); |
| |
| bt_mesh_prov_buf_init(&msg, PROV_COMPLETE); |
| if (bt_mesh_prov_send(&msg, NULL)) { |
| LOG_ERR("Failed to send Provisioning Complete"); |
| goto session_key_destructor; |
| } |
| |
| /* Ignore any further PDUs on this link */ |
| bt_mesh_prov_link.expect = PROV_NO_PDU; |
| atomic_set_bit(bt_mesh_prov_link.flags, COMPLETE); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && |
| atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION)) { |
| bt_mesh_dev_key_cand(dev_key); |
| goto session_key_destructor; |
| } |
| |
| /* Store info, since bt_mesh_provision() will end up clearing it */ |
| if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY)) { |
| identity_enable = is_pb_gatt(); |
| } else { |
| identity_enable = false; |
| } |
| |
| err = bt_mesh_provision(pdu, net_idx, flags, iv_index, bt_mesh_prov_link.addr, dev_key); |
| if (err) { |
| LOG_ERR("Failed to provision (err %d)", err); |
| goto session_key_destructor; |
| } |
| |
| /* After PB-GATT provisioning we should start advertising |
| * using Node Identity. |
| */ |
| if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY) && identity_enable) { |
| bt_mesh_proxy_identity_enable(); |
| } |
| |
| session_key_destructor: |
| bt_mesh_key_destroy(&session_key); |
| } |
| |
| static void reprovision_complete(void) |
| { |
| bt_mesh_reprovision(bt_mesh_prov_link.addr); |
| |
| /* When performing the refresh composition procedure, |
| * the device key will be activated after the first |
| * successful decryption with the new key. |
| */ |
| if (bt_mesh_node_refresh_get() == BT_MESH_RPR_NODE_REFRESH_ADDR) { |
| bt_mesh_dev_key_cand_activate(); |
| } |
| |
| if (bt_mesh_prov->reprovisioned) { |
| bt_mesh_prov->reprovisioned(bt_mesh_primary_addr()); |
| } |
| } |
| |
| static void reprovision_fail(void) |
| { |
| bt_mesh_dev_key_cand_remove(); |
| } |
| |
| static void local_input_complete(void) |
| { |
| if (atomic_test_bit(bt_mesh_prov_link.flags, PUB_KEY_SENT) || |
| atomic_test_bit(bt_mesh_prov_link.flags, OOB_PUB_KEY)) { |
| send_input_complete(); |
| } else { |
| atomic_set_bit(bt_mesh_prov_link.flags, INPUT_COMPLETE); |
| } |
| } |
| |
| static void prov_link_closed(enum prov_bearer_link_status status) |
| { |
| if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && |
| atomic_test_bit(bt_mesh_prov_link.flags, REPROVISION)) { |
| if (atomic_test_bit(bt_mesh_prov_link.flags, COMPLETE) && |
| status == PROV_BEARER_LINK_STATUS_SUCCESS) { |
| reprovision_complete(); |
| } else { |
| reprovision_fail(); |
| } |
| } else if (bt_mesh_prov_link.conf_inputs.invite[0]) { |
| /* Disable Attention Timer if it was set */ |
| bt_mesh_attention(NULL, 0); |
| } |
| |
| bt_mesh_prov_reset_state(); |
| } |
| |
| static void prov_link_opened(void) |
| { |
| bt_mesh_prov_link.expect = PROV_INVITE; |
| if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && bt_mesh_is_provisioned()) { |
| atomic_set_bit(bt_mesh_prov_link.flags, REPROVISION); |
| } |
| } |
| |
| static const struct bt_mesh_prov_role role_device = { |
| .input_complete = local_input_complete, |
| .link_opened = prov_link_opened, |
| .link_closed = prov_link_closed, |
| .error = prov_fail, |
| .op = { |
| [PROV_INVITE] = prov_invite, |
| [PROV_START] = prov_start, |
| [PROV_PUB_KEY] = prov_pub_key, |
| [PROV_CONFIRM] = prov_confirm, |
| [PROV_RANDOM] = prov_random, |
| [PROV_DATA] = prov_data, |
| }, |
| }; |
| |
| int bt_mesh_prov_enable(bt_mesh_prov_bearer_t bearers) |
| { |
| if (IS_ENABLED(CONFIG_BT_MESH_RPR_SRV) && |
| (bearers & BT_MESH_PROV_REMOTE)) { |
| pb_remote_srv.link_accept(bt_mesh_prov_bearer_cb_get(), NULL); |
| |
| /* Only PB-Remote supports reprovisioning */ |
| if (bt_mesh_is_provisioned()) { |
| goto role_init; |
| } |
| } else if (bt_mesh_is_provisioned()) { |
| return -EALREADY; |
| } |
| |
| #if defined(CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL) |
| if (CONFIG_BT_MESH_PROVISIONEE_LOG_LEVEL > 2) { |
| struct bt_uuid_128 uuid = { .uuid = { BT_UUID_TYPE_128 } }; |
| |
| sys_memcpy_swap(uuid.val, bt_mesh_prov->uuid, 16); |
| LOG_INF("Device UUID: %s", bt_uuid_str(&uuid.uuid)); |
| } |
| #endif |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV) && |
| (bearers & BT_MESH_PROV_ADV)) { |
| bt_mesh_pb_adv.link_accept(bt_mesh_prov_bearer_cb_get(), NULL); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT) && |
| (bearers & BT_MESH_PROV_GATT)) { |
| bt_mesh_pb_gatt.link_accept(bt_mesh_prov_bearer_cb_get(), NULL); |
| } |
| |
| role_init: |
| bt_mesh_prov_link.role = &role_device; |
| |
| return 0; |
| } |
| |
| int bt_mesh_prov_disable(bt_mesh_prov_bearer_t bearers) |
| { |
| if (bt_mesh_is_provisioned()) { |
| return -EALREADY; |
| } |
| |
| if (bt_mesh_prov_active()) { |
| return -EBUSY; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV) && |
| (bearers & BT_MESH_PROV_ADV)) { |
| bt_mesh_beacon_disable(); |
| bt_mesh_scan_disable(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT) && |
| (bearers & BT_MESH_PROV_GATT)) { |
| (void)bt_mesh_pb_gatt_srv_disable(); |
| } |
| |
| return 0; |
| } |