| # Generic networking options |
| CONFIG_NETWORKING=y |
| CONFIG_NET_UDP=y |
| CONFIG_NET_TCP=n |
| CONFIG_NET_IPV6=y |
| CONFIG_NET_IPV4=n |
| |
| CONFIG_NET_CONFIG_NEED_IPV6=y |
| CONFIG_NET_CONFIG_NEED_IPV4=n |
| |
| # disable certain parts of Zephyr IPv6 stack |
| CONFIG_NET_IPV6_NBR_CACHE=n |
| CONFIG_NET_IPV6_MLD=n |
| |
| # Kernel options |
| CONFIG_NEWLIB_LIBC=y |
| CONFIG_MAIN_STACK_SIZE=4096 |
| CONFIG_ENTROPY_GENERATOR=y |
| CONFIG_TEST_RANDOM_GENERATOR=y |
| CONFIG_INIT_STACKS=y |
| #CONFIG_DEBUG_OPTIMIZATIONS=y |
| |
| # Logging |
| CONFIG_NET_LOG=y |
| CONFIG_LOG=y |
| CONFIG_NET_STATISTICS=y |
| CONFIG_PRINTK=y |
| |
| # Network buffers |
| CONFIG_NET_PKT_RX_COUNT=16 |
| CONFIG_NET_PKT_TX_COUNT=16 |
| CONFIG_NET_BUF_RX_COUNT=80 |
| CONFIG_NET_BUF_TX_COUNT=80 |
| CONFIG_NET_CONTEXT_NET_PKT_POOL=y |
| |
| # Thread by default registers quite a lot addresses. |
| CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=6 |
| CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=8 |
| CONFIG_NET_MAX_CONTEXTS=10 |
| |
| # OpenThread NCP needs to be able to reboot |
| CONFIG_REBOOT=y |
| |
| # Allow monitoring of stacks |
| # CONFIG_KERNEL_SHELL=y |
| |
| # make sure that Bluetooth is off |
| CONFIG_BT=n |
| |
| # OpenThread is using C++ |
| CONFIG_CPLUSPLUS=y |
| |
| # Other OpenThread dependencies |
| CONFIG_FLASH=y |
| CONFIG_FLASH_PAGE_LAYOUT=y |
| CONFIG_FLASH_MAP=y |
| CONFIG_MPU_ALLOW_FLASH_WRITE=y |
| CONFIG_NVS=y |
| CONFIG_SETTINGS=y |
| |
| # mbedTLS tweaks |
| CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=768 |
| CONFIG_MBEDTLS_HEAP_SIZE=8192 |
| # CONFIG_MBEDTLS_DEBUG=y |
| # CONFIG_MBEDTLS_DEBUG_LEVEL=4 |
| |
| # Enable OpenThread |
| CONFIG_NET_L2_OPENTHREAD=y |
| |
| # Configure OpenThread |
| CONFIG_OPENTHREAD_CHANNEL=26 |
| # Use PANID 0xffff to be able to commission |
| CONFIG_OPENTHREAD_PANID=65535 |
| |
| # Increase a few stack and other sizes for OpenThread |
| CONFIG_SYSTEM_WORKQUEUE_STACK_SIZE=2048 |
| CONFIG_NET_TX_STACK_SIZE=2048 |
| CONFIG_NET_RX_STACK_SIZE=5120 |
| CONFIG_SHELL_STACK_SIZE=3072 |
| CONFIG_OPENTHREAD_THREAD_STACK_SIZE=8192 |
| CONFIG_OPENTHREAD_PKT_LIST_SIZE=20 |
| |
| # Settings for the Border Router |
| # from https://openthread.io/guides/border-router/build#build-and-flash-ncp |
| |
| # CONFIG_OPENTHREAD_DHCP6_CLIENT is not set |
| CONFIG_OPENTHREAD_DHCP6_SERVER=y |
| CONFIG_OPENTHREAD_COMMISSIONER=y |
| CONFIG_OPENTHREAD_BORDER_AGENT=y |
| CONFIG_OPENTHREAD_BORDER_ROUTER=y |
| CONFIG_OPENTHREAD_UDP_FORWARD=y |
| CONFIG_OPENTHREAD_NCP=y |
| CONFIG_OPENTHREAD_ENABLE_SERVICE=y |
| |
| # OpenThread shell interferes with Zephyr shell |
| CONFIG_OPENTHREAD_SHELL=n |
