blob: 0c8d07db2ec8a33ff1968f48b25294abf5b9e4b6 [file] [log] [blame]
/*
* Copyright (c) 2020, Bernhard Kraemer
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <nxp/nxp_rt1060.dtsi>
#include "teensy4-pinctrl.dtsi"
#include <freq.h>
#include <mem.h>
/ {
model = "PJRC TEENSY 4.0 board";
compatible = "nxp,mimxrt1062";
aliases {
led0 = &board_led;
};
chosen {
zephyr,flash-controller = &w25q16jvuxim;
zephyr,flash = &w25q16jvuxim;
zephyr,sram = &ocram;
zephyr,itcm = &itcm;
zephyr,dtcm = &dtcm;
zephyr,console = &lpuart6; /* Teensy Pins 0(RX1) 1(TX1) */
zephyr,shell-uart = &lpuart6;
zephyr,canbus = &flexcan1; /* Teensy Pins 23(CRX1) 22(CTX1) */
};
leds {
compatible = "gpio-leds";
board_led: led-1 {
gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
label = "User LED Pin 13";
};
};
};
&flexspi {
status = "okay";
reg = <0x402a8000 0x4000>, <0x60000000 DT_SIZE_M(2)>;
/* WINBOND flash memory*/
w25q16jvuxim: w25q16jvuxim@0 {
compatible = "nxp,imx-flexspi-nor";
size = <DT_SIZE_M(2 * 8)>;
reg = <0>;
spi-max-frequency = <DT_FREQ_M(133)>;
status = "okay";
jedec-id = [ef 40 15];
erase-block-size = <4096>;
write-block-size = <1>;
};
};
zephyr_udc0: &usb1 {
status = "okay";
};
&lpuart6 {
status = "okay";
current-speed = < 115200 >;
};
&flexcan1 {
status = "okay";
bus-speed = < 125000 >;
};
&edma0 {
status = "okay";
};
/* Pinmux settings */
&enet {
pinctrl-0 = <&pinmux_enet>;
pinctrl-names = "default";
};
&flexcan1 {
pinctrl-0 = <&pinmux_flexcan1>;
pinctrl-names = "default";
};
&flexcan1 {
pinctrl-0 = <&pinmux_flexcan1>;
pinctrl-names = "default";
};
&flexcan2 {
pinctrl-0 = <&pinmux_flexcan2>;
pinctrl-names = "default";
};
&flexcan3 {
pinctrl-0 = <&pinmux_flexcan3>;
pinctrl-names = "default";
};
&lpi2c1 {
pinctrl-0 = <&pinmux_lpi2c1>;
pinctrl-names = "default";
};
&lpi2c3 {
pinctrl-0 = <&pinmux_lpi2c3>;
pinctrl-names = "default";
};
&lpi2c4 {
pinctrl-0 = <&pinmux_lpi2c4>;
pinctrl-names = "default";
};
&lpspi3 {
pinctrl-0 = <&pinmux_lpspi3>;
pinctrl-names = "default";
};
&lpspi4 {
pinctrl-0 = <&pinmux_lpspi4>;
pinctrl-names = "default";
};
&lpuart1 {
pinctrl-0 = <&pinmux_lpuart1>;
pinctrl-1 = <&pinmux_lpuart1_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart2 {
pinctrl-0 = <&pinmux_lpuart2>;
pinctrl-1 = <&pinmux_lpuart2_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart3 {
pinctrl-0 = <&pinmux_lpuart3>;
pinctrl-1 = <&pinmux_lpuart3_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart4 {
pinctrl-0 = <&pinmux_lpuart4>;
pinctrl-1 = <&pinmux_lpuart4_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart5 {
pinctrl-0 = <&pinmux_lpuart5>;
pinctrl-1 = <&pinmux_lpuart5_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart6 {
pinctrl-0 = <&pinmux_lpuart6>;
pinctrl-1 = <&pinmux_lpuart6_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart7 {
pinctrl-0 = <&pinmux_lpuart7>;
pinctrl-1 = <&pinmux_lpuart7_sleep>;
pinctrl-names = "default", "sleep";
};
&lpuart8 {
pinctrl-0 = <&pinmux_lpuart8>;
pinctrl-1 = <&pinmux_lpuart8_sleep>;
pinctrl-names = "default", "sleep";
};
&usdhc1 {
pinctrl-0 = <&pinmux_usdhc1>;
pinctrl-1 = <&pinmux_usdhc1_slow>;
pinctrl-2 = <&pinmux_usdhc1_med>;
pinctrl-3 = <&pinmux_usdhc1_fast>;
pinctrl-names = "default", "slow", "med", "fast";
};
&systick {
status = "okay";
};